Farm Equipment Swine Equipment For Sale In Escondido

I.D. = .89" O.D. = 1.52" Chore-Time Multiflo Flex Auger. Maximum moisture content = 18%. Delivery Rate = 15 lb./min. Maximum particle size = 3/16" dia. Used to convey mash, crumbles or small pellets.

Used to convey mash, crumbles or small pellet feeds. Maximum moisture content = 18%. Maximum particle size = 3/16" dia. With standard 348 RPM power unit. Delivery Rate = 100 lb./min.

Replacement parts: Motor = CT5051, Pinion Gear = CT5046, Gearhead = CT3261-7 Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90' in length and M108 Flex Auger Systems from 20' - 50' in length.

Chore-Time 5/8" Shaft Collar. Used on Model 75/90/HMC/108 anchor & bearing assemblies.

This coupler is used to connect two pieces of M55 tubing together when there is no bell end available. Commonly used when repairing/replacing M55 pvc tubing. Chore-Time Model 55 PVC Coupler.

Chore-Time Model 75 Drop Kit with Clamps. Clamps hold the Drop in place.

Chore-Time Boot Bearing Assembly. Used on Chore-Time M75 Auger Boots prior to 1996 and M125 Boots

Chore-Time Model 90/HMC/108 Drop Tube Pin. Use with Model 90/ HMC/108 Outlets and CT6381 Drop Tube.

Chore-Time Model 90/HMC Plastic Drop Tube (3 3/4" x 12')

This is a complete Lower Boot that will accomodate a Single M55 auger exiting the boot at a 30� angle. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly.

Chore-Time Model 55/75 Flex-Joint Ring. Must use CT6381 Drop Tube with this Flex-Joint Ring.

Chore-Time Model 75 PVC Tubing. Each Tube is 10' long.

Rounded hand grips on the top and side make for easy handling. These double panels are perfect for large alleyways, pens and stand alone tasks such as marking and medicating. Designed to move animals with ease, Kane sorting boards are light weight yet...

Chore-Time Model 75/90 Control Unit Funnel. Attaches to the bottom of the control unit box and funnels feed into a round discharge.

Replacement parts: Motor = CT5050, Pinion Gear = CT5046, Gearhead = CT32617 Used on M75 Flex Auger sysems from 20' - 80' in length, M90 & HMC Flex Auger sysems from 20' - 30' in length.

High Limit Switch, 275-Deg., for "Guardian" models, Switch only

Pilot Light shield for Classic 115/377/379

Fan Wheel, 8" Diameter x 4-7/8, for Classic 115/377/379

Valve, Gas control, (LP Gas), 11" W.C., use in AW215CH, AW230EH, FH; All Guardian Models

Air Proving Switch, used in models: AB200, AB250, AW075, AW215, AW230, AW250,AW325, Classic 115, 170 (G-K Series)

Chore-Time Model 90/HMC Tube Connector Only. Steel tube to Steel tube.

This is the lower boot body only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. Chore-Time Model 55 Quad Auger Boot Weldment Only.

Chore-Time Replacment Oil Seal (Pinion Side) for Gearheads CT32611, CT32612, CT32616 & CT32618

Chore-Time Model HMC Direct Drive Control Unit, 1Phase

This is the lower boot body only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. Chore-Time Model 55 Single Auger Boot Weldment Only.

The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility. The vinyl coated fiberglass shaft extends completely thru this nw paddle head & into the end of the poker tip making...

Chore-Time Model 75 Tube Connector Only (steel conn/PVC pipe)