Farm Equipment Swine Equipment For Sale In Durham

Chore-Time Toggle Switch for CT27711 Auger Timer

Pilot Light Sheild, used in Classic 60K, 346 and 348 heaters.

Translucent feeder provides quick visual check of its contents. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg). Chore-Time Model 55 Clear Drop Feeder Assembly.

Chore-Time Model 55 PVC Tubing. Each Tube is 10' long.

Chore-Time Multiflo Nylon 90� Elbow with Coupler & Clamps.

Chore-Time Clean-Out Cover Assembly. This is the auger access door assembly that mounts in the side of a Chore-Time lower boot.

Chore-Time Model 108 PVC Tubing

New improved design, made of molded one-piece plastic, make the new Blue Finisher waterswing better than the stainless waterswing, at a galvanized price. Wrench flats for easy nipple maintenance and stainless steel grommet won't wear out.

Koehn 1/2" x 48" Original Grip Rattle Paddle without BB's inside to help animals move along alleyways. The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility.

Kane�s polyethylene heat mats installed with�thermostat controls are simply the most energy efficient heat mats in the world.� Kane thermostats reduce power consumption by an additional 50% of the rated watts per crate listings.� Designed for...

Chore-Time Model 55 Direct Drive Control Unit, 1 Phase

Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M90 auger exiting the boot horizontal to the ground. Chore-Time Model 90 Single Straight-Out Lower Boot Assembly.

Chore-Time Model 75/HMC Driver Weldment Assembly. Assembly includes CT7704 Driver Weldment, CT7703 Aguer Clamp and Cap Screws.

Chore-Time Model 75 Tube Anchor. This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe.

Fan Wheel, 8" Diameter x 4-7/8, for Classic 115/377/379

Stainless-Steel trip plate & housing. Big enough for sows, yet small enough for baby pigs. Trojan's Cast Iron Cup with powder coat finish "Super Stong". All Models use the same tried & proven non-siphoning trouble free 393 valve.

Chore-Time Model 55/75/90/108 1HP, 230V, 1-Phase Replacement Motor. For use on the following power Units: CT325949, CT325979 and CT3259123

Chore-Time Model 55/75 Flex-Joint Ring. Must use CT6381 Drop Tube with this Flex-Joint Ring.

Chore-Time Model 55/MF Tube Clamp

Chore-Time Model 55 Tube Anchor. This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe.

Supply Hose, 3/8" x 10' for Models Guardian60/100, Classic 60N, 115, 115N, 40 (NG). Contains hose, 06654 adapter.

Chore-Time Replacment Vent Pipe Plug. This is the top plug on all Chore-Time Gearheads.

Fan Wheel, 10-3/4" x 4-7/8", for Classic 170/408/410

Supply Hose, 3/8" x 10' for Models Guardian60/100 HSI. Package contains hose, 06654 adapter.

Perfect for barns, kennels, garages and whelping areas. Dial-A-Temp plugs right into your outlet to provide a quick and easy way to regulate temperature. Just plug your heat mat into the bottom of the control and create a warm, dry environment for your...

Chore-Time Model 75/90/HMC/108 3/4HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT5051, Pinion Gear = CT5046, Gearhead = CT3261-7 Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90'...

Precision machined tapered threads create a water-tight union. Sharp, deep teeth penetrate bite, improving bonding. Install connector and locknut, then screw in Model 75 nipple using pipe thread tape or pipe dope (not included).