Farm Equipment Swine Equipment For Sale In District Of Columbia

Supply Hose, 3/8" x 10' for Models Guardian60/100 HSI. Package contains hose, 06654 adapter.

Chore-Time Model 90/HMC PVC Tubing. Each tube is 10' long.

Chore-Time Replacment Oil Seal (Output Shaft) for All Chore-Time Gearheads

Chore-Time Model 108 5" Clamp

Chore-Time Model HMC Direct Drive Control Unit, 1Phase

Chore-Time Model 75 Anchor & Bearing Assembly (CT #37346). Long anchor tube on this assembly allows for more controlled flow into the auger.

Chore-Time Model 90 Model Parts Package. This Weldment will accept the M90 Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

Gas Cock Valve, Manual Shut Off with 1/2" pipe nipple. All "Ag " heaters

Chore-Time Model HMC Model Parts Package. This Weldment will accept the HMC Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

For a complete lower boot use part number CT9313 This is the lower boot body only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.

Chore-Time Model 90/HMC Tube Connector Only. Steel tube to Steel tube.

Chore-Time Model 55/75/90/108 1HP, 230V, 1-Phase Replacement Motor. For use on the following power Units: CT325949, CT325979 and CT3259123

Translucent feeder provides quick visual check of its contents. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg). Enable multiple feedings per sow per day by automating drop feeders with one of...

Chore-Time Flex Auger Anchor Kit

Chore-Time Model 108 45D PVC Elbow

Chore-Time Model 75/90/HMC/108 3/4HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT5051, Pinion Gear = CT5046, Gearhead = CT3261-7 Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90'...

Chore-Time Flex Auger Clamp for Model 75/90/HMC Driver Weldment at Control Unit. Also used on Model 108 Anchor & Bearing Assembly

Pilot Light Orfice, (NG), for Classic 60/348, Classic 115/379, Classic 170/410

Thermostat, Unit Mount with Bracket, Stainles Steel, (less wiring) Used in all Side Draw Models, (not Guardians)

Chore-Time Model 75/90/HMC/108 1HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT6857, Pinion Gear = CT6104, Gearhead = CT32617 Used on M75 Flex Auger sysems from 160' - 200' in length, M90 & HMC Flex Auger sysems from 100' - 50' in...

Slotted filter keeps foreign matter out of the valve. Built in playguard protects trigger action. Designed for use with pigs 50 lbs or more. The Trojan long lasting non-corrosive 304 Stainless Steel body & trigger.

Chore-Time Gearhead Assembly 348 RPM used in Model 75, 90, HMC, 125, & 108 systems. Uses CT6104 Pinion Gear with 1/2 HP and 3/4 HP motors and CT5046 with 1 HP motors.

Chore-Time Toggle Switch for CT27711 Auger Timer

Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot at a 30� angle. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly.

Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising a few head of livestock. G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately 150 pounds of feed.

Chore-Time Model 90 Anchor & Bearing Assembly. Short anchor tube on this assembly allows for less restriction and more flow into the auger.

Chore-Time Model 75 45� PVC Elbow