Farm Equipment Swine Equipment For Sale In Detroit

Chore-Time Multiflo Nylon 90� Elbow with Coupler & Clamps.

Fan Wheel, 10-3/4" x 4-7/8", for Classic 170/408/410

Thermostat, Unit Mount with Bracket, Stainles Steel, (less wiring) Used in all Side Draw Models, (not Guardians)

Chore-Time Model 90 Model Parts Package. This Weldment will accept the M90 Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate a Single M75 auger exiting the boot horizontal to the ground.

Chore-Time Replacment Oil Seal (Pinion Side) for Gearheads CT32611, CT32612, CT32616 & CT32618

The ESU Electronic Temperature Controller is a thermostatic control device that allows you to select and maintain the ideal temperature for all pets and livestock. It also incorporates a unique safety shutoff protector.

Chore-Time Model 55 1/2 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Replacement parts: Motor = CT5703, Pinion Gear = CT5046, Gearhead = CT32615 Used on Flex Auger sysems from 160' - 250' in length.

Chore-Time Model 108 Tube Insert

Chore-Time Replacment Vent Pipe Plug. This is the top plug on all Chore-Time Gearheads.

LP Orfice, Burner, for Classic 170/408

Chore-Time Model 90 Drop Kit with Clamps. Clamps hold the Drop in place.

Chore-Time Model 55/75/90/108 1HP, 230V, 1-Phase Replacement Motor. For use on the following power Units: CT325949, CT325979 and CT3259123

Chore-Time Nylon Pulley Assembly

Chore-Time Model 55 Direct Drive Control Unit, 1 Phase

The Sensor plus also includes a built in heater to dissapate moisture around the sensor. The Sensor Plus Drop Tube Switch has a built in safety timer that allows the operator to set a Maximum Run Time for the auger to ensure that it will not continue...

Chore-Time Model 75 Bearing Cap Assembly. This is the bearing assembly used on CT35346 & CT35347 Anchor & Bearing Assemblies manufactured since May 1996.

Chore-Time Model 75 PVC Tubing. Each Tube is 10' long.

Pilot Light Orfice, (NG), for Classic 60/348, Classic 115/379, Classic 170/410

Just what you need for small hog operations, 4H or FFA Projects, a galvanized 2 hole hog feeder.

Chore-Time Model 90 Anchor & Bearing Assembly. Short anchor tube on this assembly allows for less restriction and more flow into the auger.

The Spiglet reduces spray waste by directing the nipple into the mouth. Adjusts to 3 water flow rates & features a screen filter that keeps foreign matter out of the valve. 5/8" Bite on Water Supply Trigger.

Chore-Time Model 55 Mechanical Drop Feeder Control Unit. Used at the end of a Drop Feeding system to control the operation of the power unit.

Chore-Time Model 75 Tube Clamp (Steel)

Chore-Time Model 75/90/HMC/108 3/4HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT5051, Pinion Gear = CT5046, Gearhead = CT3261-7 Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90'...

Chore-Time Model 55 Model Parts Package. This Weldment will accept the M55 Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

These double panels are perfect for large alleyways, pens and stand alone tasks such as marking and medicating. Rounded hand grips on the top and side make for easy handling. Designed to move animals with ease, Kane sorting boards are light weight yet...