Farm Equipment Swine Equipment For Sale In Cincinnati

Chore-Time Model 75 Tube Clamp (Steel)

Assembly includes CT7704 Driver Weldment, CT7703 Aguer Clamp and Cap Screws. Chore-Time Model 75/HMC Driver Weldment Assembly.

Chore-Time Model 108 Tube Insert

Must use CT6381 Drop Tube with this Flex-Joint Ring. Chore-Time Model 55/75 Flex-Joint Ring.

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model HMC Anchor & Bearing Assembly.

This is the bearing assembly used on CT35343, CT35344 & CT35345 Anchor & Bearing Assemblies. Chore-Time Model 90/HMC Bearing Cap Assembly.

I.D. = 1.75" O.D. = 2.71" Maximum moisture content = 18%. With standard 348 RPM power unit. Maximum particle size = 3/16" dia. Used to convey mash, crumbles or small pellet feeds. Chore-Time Model 90 Flex Auger.

This Weldment will accept the M90 Tube. Chore-Time Model 90 Model Parts Package. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

Short anchor tube on this assembly allows for less restriction and more flow into the auger. Chore-Time Model 90 Anchor & Bearing Assembly.

Clamps hold the Drop in place. Chore-Time Model 75 Drop Kit with Clamps.

Pilot Light shield for Classic 115/377/379

For use on the following power Units: CT325966, CT325982, and CT3259124 Chore-Time Model 108 1.5HP , 230V, 1-Phase Replacement Motor.

Replacement parts: Motor = CT5050, Pinion Gear = CT5046, Gearhead = CT32617 Chore-Time Model 75/90/HMC 1/2HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Used on M75 Flex Auger sysems from 20' - 80' in length, M90 & HMC Flex Auger sysems from 20' - 30' in length.

This is the side plug on all Chore-Time Gearheads. Chore-Time Replacement 1/4 NPT Pipe Plug.

Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot horizontal to the ground. Chore-Time Model 108 Single Straight-Out Lower Boot Assembly Only.

This Weldment will accept the M108 Tube. Chore-Time Model 108 Model Parts Package. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

Auger slips over tube and uses CT7703 Auger Clamp/ Chore-Time Model 75/HMC Driver Weldment Only.

Stainless Steel U-bolt for easy adjustment of nipple height. A painted bracket permits you to attach water pipe to wall or paneling. Built tough to resist hog abuse.

Chore-Time Model 75 Tube Connector Only

3/4" Bite on Water Supply Trigger. The orfice is adjustable to provide three flow rates. Designed for use with pigs 50 lbs. Outstanding finisher nipple. Wrench flats provide ease in installation of theis standard 1/2" connection valve.

Fan Wheel, 10-3/4" x 4-7/8", for Classic 170/408/410

Chore-Time Model 90/HMC Tube Clamp (PVC or Steel)

Used on Chore-Time M75 Auger Boots prior to 1996 and M125 Boots Chore-Time Boot Bearing Assembly.

Translucent feeder provides quick visual check of its contents. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg). Chore-Time Model 55 Clear Drop Feeder Assembly.

For a complete lower boot use part number CT36389 or CT 36390 This is the lower boot body only. Chore-Time Model 75 Twin Auger Boot Weldment Only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.

This is the auger access door assembly that mounts in the side of a Chore-Time lower boot. Chore-Time Clean-Out Cover Assembly.

Chore-Time Flex Auger Anchor Kit