Farm Equipment Swine Equipment For Sale In Boise City

Chore-Time Flex Auger Clamp for Model 75/90/HMC Driver Weldment at Control Unit. Also used on Model 108 Anchor & Bearing Assembly

This Weldment will accept the M55 Tube. Chore-Time Model 55 Model Parts Package. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

Chore-Time Model 108 Anchor & Bearing Assembly. Short anchor tube on this assembly allows for less restriction and more flow into the auger.

100W, 110v heating element installs on any pipe, plastic or metal, in less that one minute using the two springs attached to the Pip-N-Hot unit. Useful as a heat supplement on supply lines under livestock waterers.

Control Valve Replacement for Pilot Light Heaters upto and including Series "J"

Chore-Time Model 75/HMC Driver Weldment Only. Auger slips over tube and uses CT7703 Auger Clamp/

Chore-Time Model 75 Tube Clamp (Steel)

Chore-Time Model 75 Anchor & Bearing Assembly (CT #37346). Long anchor tube on this assembly allows for more controlled flow into the auger.

All Models use the same tried & proven non-siphoning trouble free 393 valve. Trojan's Cast Iron Cup with powder coat finish "Super Stong". Stainless-Steel trip plate & housing. Big enough for sows, yet small enough for baby pigs.

Just what you need for small hog operations, 4H or FFA Projects, a galvanized 2 hole hog feeder.

Replacement parts: Motor = CT5050, Pinion Gear = CT5046, Gearhead = CT32617 Chore-Time Model 75/90/HMC 1/2HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Used on M75 Flex Auger sysems from 20' - 80' in length, M90 & HMC Flex Auger sysems from 20' - 30' in length.

Pilot Light Orfice, (NG), for Classic 60/348, Classic 115/379, Classic 170/410

All Models use the same tried & proven non-siphoning trouble free 393 valve. Trojan's Cast Aluminum with baked on powder coat finish. Stainless-Steel trip plate & housing. Big enough for sows, yet small enough for baby pigs.

Motor, Totally Enclosed with Sleeve Bearing, 1/15 HP, Classic 60/346/348

Commonly used when repairing/replacing M55 pvc tubing. Chore-Time Model 55 PVC Coupler. Glued into place with PVC cement. This coupler is used to connect two pieces of M55 tubing together when there is no bell end available.

Provide the optimal climate for your animals with Kane's pet and livestock heat mats. Warning: heat radiating appliance for animals - always use a temperature control device - do not cover Kane heat mats with any articles or materials.

Honeywell Gas Valve, NG Gas, for "K" series or later Pilot Light "Classic" heaters.

Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME � Winch systems. Chore-Time Model 55 Clear Drop Feeder Assembly. Translucent feeder provides quick visual check of its contents.

Just plug your heat mat into the bottom of the control and create a warm, dry environment for your small animals. Dial-A-Temp plugs right into your outlet to provide a quick and easy way to regulate temperature.

Chore-Time Model 108 PVC Coupler

Chore-Time Model 108 Tube Insert

Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. Chore-Time Model 75 Twin Auger Boot Weldment Only. For a complete lower boot use part number CT36389 or CT 36390

Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME � Winch systems. Chore-Time Model 55 Clear Drop Feeder Assembly. Translucent feeder provides quick visual check of its contents.

Chore-Time Model 75 Drop Kit with Clamps. Clamps hold the Drop in place.

Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. Chore-Time Model 55 Twin 30� Lower Boot Assembly. Does not include plastic upper transition boot.

Chore-Time Diaphragm Assembly for CT46051 Switch Assembly

Chore-Time Model 55/75 Flex-Joint Ring. Must use CT6381 Drop Tube with this Flex-Joint Ring.