Farm Equipment Swine Equipment For Sale In Akron

Replacement parts: Motor = CT5051, Pinion Gear = CT5046, Gearhead = CT3261-7 Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90' in length and M108 Flex Auger Systems from 20' - 50' in length.

Used under a drop to "Y" or split the feed from one drop tube in to 2 drop tubes. Chore-Time Model 55/75/MF "Y" Outlet.

Control Valve Replacement for Pilot Light Heaters upto and including Series "J"

This kit made to mount the Trojan water swing includes 6 feet of chain, 2 S-Hooks, 1 Screw Hook and 2 - A7900 Trojan Model 2000 Wrench Curve Nipples.

108.5 watts per side Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with maximum flexibility and energy savings when heating crates, free stall,...

This Weldment will accept the M108 Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. Chore-Time Model 108 Model Parts Package.

Clamps hold the Drop in place. Chore-Time Model 55 Drop Kit with Clamps.

This is a complete Lower Boot that will accomodate a Single M90 auger exiting the boot horizontal to the ground. Does not include plastic upper transition boot. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly.

Steel tube to Steel tube. Chore-Time Model 90/HMC Tube Connector Only.

Chore-Time Multiflo Nylon 90� Elbow with Coupler & Clamps.

This is the lower boot body only. For a complete lower boot use part number CT9315 Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.

Replacement parts: Motor = CT6857, Pinion Gear = CT6104, Gearhead = CT32617 Used on M75 Flex Auger sysems from 160' - 200' in length, M90 & HMC Flex Auger sysems from 100' - 50' in length and M108 Flex Auger Systems from 60' - 100' in length.

Chore-Time Model 108 5" Clamp

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model 75 Anchor & Bearing Assembly (CT #37346).

The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility. The vinyl coated fiberglass shaft extends completely thru this nw paddle head & into the end of the poker tip making...

Honeywell Gas Valve, NG Gas, for "K" series or later Pilot Light "Classic" heaters.

Chore-Time Model 90/HMC Tube Clamp (PVC or Steel)

Assembly includes CT7704 Driver Weldment, CT7703 Aguer Clamp and Cap Screws. Chore-Time Model 75/HMC Driver Weldment Assembly.

The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility. The vinyl coated fiberglass shaft extends completely thru this nw paddle head & into the end of the poker tip making...

Chore-Time Replacment Oil Seal (Pinion Side) for Gearheads CT32611, CT32612, CT32616 & CT32618

Chore-Time Model 55 Direct Drive Control Unit, 1 Phase

Chore-Time Model 108 PVC Tubing

Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg). Translucent feeder provides quick visual check of its contents. Enable multiple feedings per sow per day by automating drop feeders with one of...

Chore-Time Model 75 Tube Connector w/Clamps

NG Orfice, Burner, for Classic 170/410

All "Ag " heaters Gas Cock Valve, Manual Shut Off with 1/2" pipe nipple.

Fan Wheel, 8" Diameter x 4-7/8, for Classic 115/377/379