Farm Equipment Livestock Waterers For Sale In West Valley City

This repair kit fits the Models 101, 202 & 404 with or without heat.

White polyethylene disc float only.

Weather strip & an insulated sleeve for the supply line come with each unit. Double wall DURAROCK construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor.

Connects valve to 301 round float. A brass rod float arm 1/4" x 12" with threads on each end.

The orange cap only that fits over the insides of the Franklin Valve.

Robert's 3/4" rubber cup ring that fits on the brass plunger.

It moves the plunger to and from the orfice. The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin.

The low profile design & fully hinged door provids animals better access to the capacity of the water & combination water gasket & foam gasket ensures an airtight seal between the lid & base.

600 watt x 120 volt heating element only Arkfeld waterer element replacement.

3 year warranty. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. Dimension: 50" x 33 1/4" x 24 1/4"

80 Watt Immersible element used in the PC 1 waterer.

Float Arm for the Mira Fount M3330 waterer.

Operates effecicently at the bottom of the bucket because warm water rises. 1 year warranty. Farm Innovator's Ice Chaser operates automatically only during freezing temperatures. SAFE IN PLASTIC.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

#8 on breakdown. Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly.

Valve 36" Float Cord Only.

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground. Corrugated design provides rigidity without bulk when back filled with earth.

These are not included when ordering a base only. There are four base screws that hold the top base to the bottom base.

Mostly used on Franklin hog waterers. Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet.

DO NOT SUMBERGE THE REPLACEMENT SENSOR, it is only designed to sense the temperature of the air. It is not adjustable for temperature. The Model HE-CNTRL air sensing thermostat is a replacement for the original "bulb and bellows" thermostat, used to protect...

Filter replacement for Topaz & Megaflow Valves.

Connects valve to 301 round float. A brass rod float arm 1/4" x 1 1/4" with threads on each end.