Farm Equipment Livestock Waterers For Sale In Tampa

Blue octagon plunger that fits inside the Mira Fount cattle waterer valve.

This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those really cold nights. Polyethylene Blue in color. With quick release access clips for the hatch cover and access doors, installation and work...

The Jug Basic Float Valve fits Models J101, 202, 303 & 404 with or without heat.

SPI 351 (old style) gasket only.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

Apex replacement float with string included.

Our chamber can go as low as minus 30 degrees F (-34.4 degrees C). OUR PERFORMANCE ONE BOX STALL DRINKER WINS BY SEVERAL LENGTHS - For corner installations in box stalls--but can be installed outdoors as well.

This repair kit fits the Models 101, 202 & 404 with or without heat.

The heat tube is designed to mate with the cavity under the drinker base. You should use silicon caulk to assure an airtight fit. The ground mount tube ONLY provides some cold weather protection to your barn stall waterer (not included), but you may need...

1/2" orfice only for the inside of a Franklin Valve.

No inside working parts included. The inside base of the Franklin Valve. This piece holds the plunger and upper arm.

This drain plug fits Models 101, 202, 303 & 404 with or without heat.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

#12-3 on the breakdown. Pride of the Farm Plastic 3 5/8" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on the Polar Max waterers.

SPI 351/352 New Generation Gasket.

45 Gallon, 48" x 35" x 25" - 1345# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

A drain plug for the Arkfeld waterers - 1 1/2" in size - Black rubber.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.

Useful for feeding or watering rabbits, poultry or any type of small animal. Capacity is one-half pint (1 cup). Polyethylene Cage Cup has molded-in hooks to clip onto the side of any type of wire animal cage.

Mostly used on cattle waterers. Blue plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

B81 includes: Ref. B81 Hook, Rod, Cone and Nut Assembly for WFD85 and MFD85 field drinker. 6, 7 and 12 (see parts list in pictures attached)

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

Robert's Brass thumbscrew that connects the short arm and long arm.