Farm Equipment Livestock Waterers For Sale In Stockton

Johnson Waterer Element Clips to hold the heating element.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

Connects valve to 301 round float. A brass rod float arm 1/4" x 1 1/4" with threads on each end.

5 year warranty. Meets "Grade A" Dairy requirements (non-siphoning). 22" W x 27" L x 26" H 7 gal. The VS15E is constructed as a sturdy double walled foam-filled (polyurethane insulation) unit.

3 year warranty. Available in Aqua Blue color only. 28 1/2" x 20" x 10 1/4" All edges have been rounded for safety & strength. The larger tanks come with 1.25� drains installed. The one piece construction eliminates cracking & splitting common in plastic-welded,...

With a 40 gallon capacity the waterer has a maximum usage of 200 Beef cows or 90 Dairy cows. Earth Tube is suggested with installation. Specs: It is 36" wide x 41" long x 19" tall.

1000 watt x 120 volt heating element only. Arkfeld waterer element replacement.

It moves the plunger to and from the orfice. The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin.

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.

The only drawback is that if the nozzle is attached, I cannot close the tail gate on my truck. I found the stated 50 gallon water capacity ends up being 35 gallons. It's designed to be positioned at the back or front of a fender well with convenient and...

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

8' 2" Diameter x 26" H 113# 5 Year Warranty If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

#9 on breakdown. Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line.

Suggested where sugar sand is a problem in the water supply. Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve.

Serves 100 sheep or calves. Optional wing bolts are available for Grade A inspections. Dependable, non siphoning valve - proven & trouble free. Nature's ground water temperature does this job.

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.

Red octagon plunger that fits inside the Mira Fount cattle waterer RED valve.

These are not included when ordering a base only. There are four base screws that hold the top base to the bottom base.

The bottom has a cavity for warm climate installations only. The cavity can be used to make the connection from the supply line to our valve. Click HERE for instructions & Repair Parts

Capacity is one-half pint (1 cup). Useful for feeding or watering rabbits, poultry or any type of small animal. Polyethylene Cage Cup has molded-in hooks to clip onto the side of any type of wire animal cage.

Connects valve to 301 round float. A brass rod float arm 1/4" x 12" with threads on each end.

SPI 351 (old style) gasket only.

87" L x 62" W x 20" H 91# 5 Year warranty If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

Apex replacement float with string included.

B81 includes: Ref. B81 Hook, Rod, Cone and Nut Assembly for WFD85 and MFD85 field drinker. 6, 7 and 12 (see parts list in pictures attached)

A drain plug for the Arkfeld waterers - 1 1/2" in size - Black rubber.