Farm Equipment Livestock Waterers For Sale In San Jose

80 Watt Immersible element used in the PC 1 waterer.

3" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

450 watt heater, 3" wide x 2 1/4" tall x 11" long, adjustable theromstat multi purpose portable heater. Do Not Immerse into liquid.

This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 3/8" orifice Valve complete with plunger and arms.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water pressure increases) Positive on/off operation Lock off with cord lock 5-150 PSI pressure rating Inlet filter Constructed from corrosion resistant...

Livestock can drink out of both flaps at the same time, not always so with a ball closure. Foam insulation between walls has an R-value of 7.14". Stainless steel bolts & removable top afford easy access to plumbing.

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

#1 on breakdown. No other parts are included with this Power Link. Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm.

Screw that holds the float connect to the top of the float.

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

Robert's 3/4" rubber plunger seat only.

A brass rod float arm 1/4" x 5" with threads on each end. Connects valve to 301 round float.

This diaphragm fits all Jug Model Valves.

Arkfeld waterer element replacement. 1000 watt x 120 volt heating element only.

Plastic piece that sits on top of the float. It is held by a float screw and connects on to the bottom of the float arm.

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.

Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly. #8 on breakdown.

Polyethylene Blue in color. 22" W x 32" L x 26" H This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those really cold nights.

Blue Flap for WPM20 Cattle Waterer

This Front Float Valve fits Models 101, 202 & 404 with or without heat.

1 year warranty. Farm Innovator's Submergible 1500 Watt Tank De-Icer operates automatically only during freezing temperatures. It features a heavy duty anti-chew cord protector & operates efficiently at the bottom of the tank; unnoticed by livestock.

Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet. Mostly used on Franklin hog waterers.

Robert's 3/4" leather cup ring that fits on the brass plunger.

The Pride of the Farm "King" Energy Efficient drinker is beefy & ruggedly built but simple. There are no loose parts. 2" built in drain, stainless steel spring loaded attachment pins make cover removal & replacement easy, recessed, protected notches for...