Farm Equipment Livestock Waterers For Sale In Salt Lake City

White styrofoam triangular disc float only.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction...

Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line. #9 on breakdown.

Weather seal Kit for Jug 101, 202 & 404 with or without heat. 1 per model EXCEPT 404 models need 2 kits.

Robert's 3/4" rubber plunger seat only.

The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin. It moves the plunger to and from the orfice.

A brass rod float arm 1/4" x 6" with threads on each end. Connects valve to 301 round float.

Pride of the Farm Link pin only. The connect the Cam & Power Link to the VP124 valve body. You will need 2 per valve assembly. #4 on breakdown

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

Blue plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet. Mostly used on cattle waterers.

450 watt heater, 3" wide x 2 1/4" tall x 11" long, adjustable theromstat multi purpose portable heater. Do Not Immerse into liquid.

Robert's Brass thumbscrew that connects the short arm and long arm.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Frost pro is a device that fits Topaz and Vortex Valves to minimize freezing in cold weather conditions. It is manually operated and when turned on allows a continuous flow of water through the valve to assist in the prevention of water freezing in the...

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Black rubber seat to fit inside the Mira Fount RED Plunger in a Mira Fount cattle waterer valve.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

SPI 351/352 (old style) Rubber Drain Plug only .

The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect the water line from freeze ups. The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Johnson Waterer Element Clips to hold the heating element.

SPI 351 (old style) gasket only.

#7 on breakdown. It has O'ring on one side & a Diaphragm on the other (not included). Pride of the Farm 5/32" Orifice on a VP124 Valve.

3/4" orfice only for the inside of a Franklin Valve.

Specify model 354, 352 or 351 energy free waterer. SPI foamed door only.