Farm Equipment Livestock Waterers For Sale In Salem

1000 Watt Immersible element used in the PC2 or PC10 waterer.

The larger tanks come with 1.25� drains installed. 40 1/2" x 28 1/4" x 14 1/4" 3 year warranty. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks.

All edges have been rounded for safety and strength. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

Valve 36" Float Cord Only.

This model features an adjustable short arm for customizing water level. Robert's Brass 3/4" orifice Valve complete with plunger and arms. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections.

SPI 90 degree elbow for all models.

#3 on breakdown. Pride of the Farm VP124 plastic valve body only. No lock pins or inner parts included.

#1 on breakdown. Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm. No other parts are included with this Power Link.

This waterer has the same description as the J404 EXCEPT THIS UNIT HAS NO HEAT!

15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

The Robert's 3/4" brass valve housing only.

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. The Tru-Test Apex Xtraflo 3/4" or 1" Trough Valve is a full flow - diaphragm activated, armless,...

Robert's 1/2" rubber cup ring that fits on the brass plunger.

THIS UNIT IS FOR METAL TANKS ONLY. ICE-N-EASY 1500W, thermostatically controlled to operate only when necessary. Farm Innovators floating tank de-icer has a heavy duty anti-chew cord protector with a 1 year guarantee.

#7 on breakdown. Pride of the Farm 5/32" Orifice on a VP124 Valve. It has O'ring on one side & a Diaphragm on the other (not included).

Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body. #10 on breakdown.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

Polar Max Drinkers operate like thermos all year long. Weather strip & an insulated sleeve for the supply line come with each unit. Tolerance to water level - you don't have to worry about summer & winter water levels.

A brass rod float arm 1/4" x 5" with threads on each end. Connects valve to 301 round float.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

#12-2 on the breakdown. Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on hog troughs.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

Arkfeld waterer element replacement. 600 watt x 240 volt heating element only.

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...