Farm Equipment Livestock Waterers For Sale In Sacramento

#11 on breakdown. Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included).

White styrofoam triangular disc float only.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

Robert's 3/4" leather cup ring that fits on the brass plunger.

#6 on breakdown. Pride of the Farm Rubber Diaphragm that fits between the orifice & the plunger on a VP124 valve.

No other parts come with the Cam Link. #2 on breakdown. This is the arm that opens & closes the plunger. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin.

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

Double wall DURAROCK construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor. Serves 200 sheep or 100 calves. Unique baffles guard against icing & keep valve operating under severest conditions.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. The one piece construction eliminates cracking and splitting common in plastic-welded, two piece...

It moves the upper arm and is also held by thumbscrew to the float arm. The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin.

Jug Thermostat fits Models 101, 202, 303 & 404 with heat.

SPI foamed door only. Specify model 354, 352 or 351 energy free waterer.

Blue Flap for WPM20 Cattle Waterer

Robert's Brass thumbscrew that connects the short arm and long arm.

It has an excellent insulating property of R15 and amazing structural strength. Highly recommended for ALL cold climate installations. The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect...

Float Arm for the Mira Fount M3360, M3410, M3410-4, M3465 waterer.

SPI 351/352 (old style) Rubber Drain Plug only .

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

No freezing occurred at this temperature--even after 7 days! Heating cost is minimal--less than $10.00 per heating season. Large 2” External AND Internal (5.1 cm) clean out drains.

SPI 90 degree elbow for all models.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction...

Filter replacement for Topaz & Megaflow Valves.

Drinker is very easy to clean-no disassembly for cleaning required. Stainless steel access plates. Foam filled-R value of 7.5 per inch. Optional ground mount tube (Model HT10) for hookup to underground service connections and for outdoor installations.

Inside repair kit for Topaz & Megaflow Valve.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction...

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

1000 Watt Immersible element used in the PC2 or PC10 waterer.