Farm Equipment Livestock Waterers For Sale In Philadelphia

Engineered with the farmer in mind, this waterer allows easy access to the submersible heater, water line, incoming services and provides effortless cleaning; an extremely low maintenance product.

O'Ring only replacement for Frost Pro Accessory.

It is manually operated and when turned on allows a continuous flow of water through the valve to assist in the prevention of water freezing in the valve and pipe work supplying it.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

Connects valve to 301 round float. A brass rod float arm 1/4" x 7" with threads on each end.

80 Watt Immersible element used in the PC 1 waterer.

Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. It will take abuse! Unaffected by ground movement due to freezing & thawing. Won't rust, resists rot & holds up to chemically active soil conditions.

This part number is for the arm only & is usually used on hog troughs. #12-2 on the breakdown. Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.

White polyethylene disc float only.

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.

This white pin holds the upper arm to the top base.

Model VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Stainless steel access plates. Simple water level adjustment, easy to clean. Our chamber can go as low as minus 30 degrees F (-34.4 degrees C).

Robert's Brass 3/4" plunger only for replacement in existing 3/4" valve.

This waterer has the same description as the J404 EXCEPT THIS UNIT HAS NO HEAT!

No inside working parts included. The orange male fitting end of the Franklin Valve.

B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers. B79P includes:Ref. 14, 15, 16 in parts list.

Thermostaically controlled to only run when necessary. The 1500 Watt element easily converts from a safe plastic floating de-icer into a submergible de-icer with a simple removal of the float.

(sold in pairs) SPI Rubber door hinges with screws for all of the New Generation energy free waterer.

Connects valve to 301 round float. A brass rod float arm 1/4" x 6" with threads on each end.

Drinker is very easy to clean-no disassembly for cleaning required. Simple water level adjustment, easy to clean. OUR PERFORMANCE ONE BOX STALL DRINKER WINS BY SEVERAL LENGTHS - For corner installations in box stalls--but can be installed outdoors as...

It moves the upper to and is also held by a thumbscrew to the float arm. The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin.

250W heater, 2" built in drain, overflow port can be used either as an internal drain or it can be used for optional continuous flow operation, rugged notches for secure anchoring & spring loaded pin allows easy removal of access panel.

Polar Max Drinkers operate like thermos all year long. Foam insulation between walls has an R-value of 7.14". It has simple installation, attractive design & has animal friendly flaps - no ball or float closures to ice.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet.

600 watt x 240 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure