Farm Equipment Livestock Waterers For Sale In North Las Vegas

The WPM14 is an extremely rugged 4 door opening, energy free unit for hogs. Notched flanges for easy anchoring. Nature's ground water temperature does this job. No pulleys & cable to foul & rust.

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.

Pride of the Farm 5/32" Orifice on a VP124 Valve. It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown.

You can expect an entire winter's heating bill of $25.00 or less - and this from a drinker that can water 250 head of beef using only 250 watts. Spring loaded pin allows access panel to pop off with the twist of a screwdriver.

Robert's Brass 3/4" orifice Valve complete with plunger and arms. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. This model features an adjustable short arm for customizing water level.

The Megaflow is compact, robust and manufactured from non-corroding materials. Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute.

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. Available in Aqua Blue color only. High Country Plastics Aqua Tank products are rotational molded with high quality FDA approved UV protected...

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

Robert's Brass 3/4" sand plunger only for replacement in existing 3/4" valve. Suggested where sugar sand is a problem in the water supply.

Plastic piece that sits on top of the float. It is held by a float screw and connects on to the bottom of the float arm.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

Same description as J101 EXCEPT THIS UNIT HAS NO HEAT.

It also features a molded bolt foot and rounded corners for livestock safety. This two hole, 5.2 gallon waterers uses a 250 or 500 watt submersible heater and can easily ship UPS. No more rust or corrosion! These electric waterers are built of a polyethylene...

Easy to install & installs in only minutes. Thermostatically controlled to only run when necessary. Unit is unnoticed by livestock - no cord in water. Custom made to use in all Rubbermaid stock tanks with 1500 Watts of power.

The Topaz is compact, robust and manufactured from non-corroding materials. They are made for tanks which have the valve mounted above or below the water. Its diaphragm principle of operation allows the Topaz to give flows of up to 90 gallons per minute.

No freezing occurred at this temperature--even after 7 days! Heating cost is minimal--less than $10.00 per heating season. Large 2” External AND Internal (5.1 cm) clean out drains.

Replacement Plastic Valve & Float f/ WFD85 and MFD85 field drinkers.

No diaphragm, cam link and power link which are three fewer maintenance items. Another plus is the VP2 is more compact than VP1 so it works very well in most of our waterer models - MH, MJ, MK, MC, WPO12, WPO17 as well as other energy-free drinkers.

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental punctures while providing easy transportation.

Same desription as the J202 EXCEPT THIS UNIT HAS NO HEAT!

14, 15, 16 in parts list. B79P includes:Ref. B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers.

The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper to and is also held by a thumbscrew to the float arm.

The Robert's 3/4" brass valve housing only.

Drinking height is 15" Door Opening is 9 1/2" x 9 1/2" and trough holds 17 gallons of water. It is insulated with polyurethane insulation & has patented door closure systems. The D-Clip features no tools required to remove lid, no crossed/stripped thread...

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental punctures while providing easy transportation.

Black rubber seat to fit inside the Mira Fount RED Plunger in a Mira Fount cattle waterer valve.