Farm Equipment Livestock Waterers For Sale In Nashville Davidson

Blue Flap for WPM20 Cattle Waterer

The High Country Plastics TC-63 Pickup Bed Water Caddy is an innovative way to haul up to 63 gallons of fresh water in your pickup truck while still allowing for easy hook-up to a gooseneck trailer.

A brass rod float arm 1/4" x 4" with threads on each end. Connect valve to 301 round float.

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

It's design reduces stock damage and minimises blockage. You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level...

Unaffected by ground movement due to freezing & thawing. It will take abuse! Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

Unaffected by ground movement due to freezing & thawing. It will take abuse! Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

It is filled with polyurethane insulation and a large, easily removed drain plug. It also features a molded bolt foot and rounded corners for livestock safety. Engineered with the farmer in mind, this waterer allows easy access to the submersible heater,...

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

Weather seal is for Models 101, 202 & 404 with or without heat. The 101 model takes 1 kit, the 202 & 404 needs 2 kits.

Polyethylene Blue in color. 22" W x 32" L x 26" H This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those really cold nights.

White polyethylene disc float only.

Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet. Mostly used on Franklin hog waterers.

250 Watt, 110 volt heater. Typical heating cost for one heating season only $10!

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. 3 year warranty. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common...

Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line. #9 on breakdown.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

Pride of the Farm Element for electric waterer units.

Farm Innovators floating tank de-icer has a heavy duty anti-chew cord protector with a 1 year guarantee. ICE-N-EASY 1500W, thermostatically controlled to operate only when necessary.

Connects to 3/4" garden hose or adaptable for pipe. We stock all replacement parts. This Dare anti-siphon farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float.

Use this valve assembly with the J303 with without heat.