Farm Equipment Livestock Waterers For Sale In Naperville

A brass rod float arm 1/4" x 12" with threads on each end. Connects valve to 301 round float.

SPI white corrugated baffle for model 4x4 energy free waterer.

Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. It's design reduces stock damage & minimises blockage. It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close.

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Dependable, non siphoning valve - proven & trouble free. Stainless steel bolts & removable top afford easy access to plumbing. Notched flanges for easy anchoring. No pulleys & cable to foul & rust.

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

The orange male fitting end of the Franklin Valve. No inside working parts included.

It will take abuse! 15" OD, corrugated plastic tubing. Corrugated design provides rigidity without bulk when back filled with earth. Won't rust, resists rot & holds up to chemically active soil conditions.

Finally, the waterers are designed with rounded corners to handle livestock abuse while ensuring livestock safety.� Specs: It is 23" wide x 40.5" long x 20" tall. The low profile design and fully hinged door provides animals better access to the water.

Guaranteed for 1 year & SAFE IN PLASTIC. Constructed of Cast Aluminum for ultimate effiency & safety. Thermostatically controlled to only run when necessary. This donut shaped 500 Watt De-Icer is designed for multiple uses around the farm.

Features Has Detach for quick access to valve seal Mounts horizontally or vertically Made from corrosion resistant materials Shuts down slowly to minimize water hammer 3/4″-2 1/2″ water level differential (increases as water inlet pressure increases)...

This model features an adjustable short arm for customizing water level. Robert's Brass 1/2" orifice Valve complete with plunger and arms. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections.

Robert's 1/2" rubber cup ring that fits on the brass plunger.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly. #8 on breakdown.

This unit fits the Model 101, 202 & 404 with or without heat.

Robert's Brass 3/4" sand plunger only for replacement in existing 3/4" valve. Suggested where sugar sand is a problem in the water supply.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

Backed with the strongest warranty available. Warmer water pushes through the ports and cooler water returns under the baffle. It has 70 inches of drinking length and holds 70 gallons.

Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers. It measures 3.25" x 4.25" x 2.38".

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole. 3 year warranty. The larger tanks come with 1.25� drains installed.

SPI foamed door only. Specify model 354, 352 or 351 energy free waterer.

Dependable, non siphoning valve - proven & trouble free. Stainless steel bolts & removable top afford easy access to plumbing. Notched flanges for easy anchoring. No pulleys & cable to foul & rust.