Farm Equipment Livestock Waterers For Sale In Mississippi

Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body. #10 on breakdown.

1/2" orfice only for the inside of a Franklin Valve.

Unaffected by ground movement due to freezing & thawing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. It will take abuse! 15" OD, corrugated plastic tubing.

Unaffected by ground movement due to freezing & thawing. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground. It will take abuse!

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Arkfeld waterer element & thermostat replacement. 600 watt x 120 volt heating element with surface mount thermostat included.

Pride of the Farm Element for electric waterer units.

This black seat fits inside the plunger and shuts off the water through the orfice. Must be used with part #400267 Plunger Only.

Screw that holds the float connect to the top of the float.

White polyethylene disc float only.

Constructed of Cast Aluminum for ultimate effiency & safety. Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. Thermostatically controlled to only run when necessary.

Megaflow Yellow Float Only.

Drinker is very easy to clean-no disassembly for cleaning required. Stainless steel access plates. Simple water level adjustment, easy to clean. Optional heater, 250 watts, 110 volts.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

Orange plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount.

Robert's shut off only arm attached to the bottom of the Robert's Brass Valve.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

The connect the Cam & Power Link to the VP124 valve body. Pride of the Farm Link pin only. You will need 2 per valve assembly. #4 on breakdown

ICE-N-EASY 1500W, thermostatically controlled to operate only when necessary. Farm Innovators floating tank de-icer has a heavy duty anti-chew cord protector with a 1 year guarantee.

A brass rod float arm 1/4" x 4" with threads on each end. Connect valve to 301 round float.

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.

Pride of the Farm Rubber Diaphragm that fits between the orifice & the plunger on a VP124 valve. #6 on breakdown.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

Constructed of Cast Aluminum for ultimate effiency & safety. Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. Thermostatically controlled to only run when necessary.

Pride of the Farm Plastic Plunger that fits directly into the VP124 valve body & the rubber diaphragm. #5 on breakdown.