Farm Equipment Livestock Waterers For Sale In Greensboro

White styrofoam round disc float only.

#10 on breakdown. Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body.

The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. This model features an adjustable short arm for customizing water level. Robert's Brass 3/4" orifice Valve complete with plunger and arms.

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.

Float Arm for the Mira Fount M3360, M3410, M3410-4, M3465 waterer.

SPI 351 (old style) gasket only.

Available in Aqua Blue color only. All edges have been rounded for safety & strength. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole.

Black rubber seat to fit inside the Mira Fount RED Plunger in a Mira Fount cattle waterer valve.

The MicroSweeper requires no maintenance, no electricity and no adjustment, EVER. It is a thermal sensing valve that is constatly in contact with the water & "intermittently" releases enough pressurized water to prevent surface ice as the water temperature...

Robert's shut off only arm attached to the bottom of the Robert's Brass Valve.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

The D-Clip features no tools required to remove lid, no crossed/stripped thread failures, quick replacement if damaged & commonly available at farm supply stores. This waterer has a MAX usage of 120 Beef, 50 Dairy or 135 Sheep.

The 101 model takes 1 kit, the 202 & 404 needs 2 kits. Weather seal is for Models 101, 202 & 404 with or without heat.

Jug Thermostat fits Models 101, 202, 303 & 404 with heat.

1000 watt x 240 volt heating element only. Arkfeld waterer element replacement.

It is a split plastic coupler that fits into the corrugation of the Earth Tube. Used for joining multiple Earth Tubes.

No lock pins or inner parts included. #3 on breakdown. Pride of the Farm VP124 plastic valve body only.

Dimensions: 39" x 37" x 23" It's maximum 24-hr electical use is 1.56 kwh. Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection...

Our drinker has 17 gallons of capacity. Drinker wells are 14" deep allowing most any animal to drink naturally. The more water, the more heat. You do need proper installation to prevent the supply line underneath the drinker from freezing.

Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan. 6' 1" Diameter x 25 1/2" H 71# 5 Year Warranty If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it...

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.

This waterer has the same description as the J404 EXCEPT THIS UNIT HAS NO HEAT!

Foam filled-R value of 7.5 per inch. Optional ground mount tube (Model HT10) for hookup to underground service connections and for outdoor installations. Simple water level adjustment, easy to clean.

Polar Max Drinkers operate like thermos all year long. 2-2" drain holes for fast clean out. Optional wing bolts are available for Grade A inspections. No heat well needed; use an 8-12" tile; can be fitted on most existing pads.

This drain plug fits Models 101, 202, 303 & 404 with or without heat.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet.