Farm Equipment Livestock Waterers For Sale In Connecticut

#11 on breakdown. Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included).

Robert's Brass cotter key that connects the long arm to the valve body.

Screw that holds the float connect to the top of the float.

FEATURES: Side, Bottom, Top Mounting Valve body screws apart by hand for easy servicing Flow stops when unscrewed for servicing Supplied with back-nut and seal washer Built in check valve Fully adjustable Float Angle Pressure range 0-150 PSI Low pressure...

Engineered with the farmer in mind, this waterer allows easy access to submersible heater, water line, incoming services and provides effortless cleaning; an extremely low maintenance product! This waterer provides (or contains): *one hole electric unit...

600 watt x 240 volt heating element only. Arkfeld waterer element replacement.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole. Available in Aqua Blue color only.

This repair kit fits the Models 101, 202 & 404 with or without heat.

The Tru-Test Apex Xtraflo 3/4" Trough Valve Long Tail is a full flow - diaphragm activated, armless, self-cleaning valve mechanism, with a longer valve end. It's design reduces stock damage and minimises blockage.

This white pin holds the upper arm to the top base.

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

#5 on breakdown. Pride of the Farm Plastic Plunger that fits directly into the VP124 valve body & the rubber diaphragm.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

O'Ring only replacement for Frost Pro Accessory.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

This drain plug fits Models 101, 202, 303 & 404 with or without heat.

Johnson Waterer Element Clips to hold the heating element.

The 101 model takes 1 kit, the 202 & 404 needs 2 kits. Weather seal is for Models 101, 202 & 404 with or without heat.

Works automatically to ambient temperature. Turns on at 35 degrees & turns off at 45 degrees. Has many uses around the home & farm. Operates with any 15 amp 120V electric heater or fan.

The WPM80 is an extremely rugged 4 door opening, energy free unit for cattle. Stainless steel bolts & removable top afford easy access to plumbing. Seamless sidewall cannot leak. Double wall DURAROCK construction contains hindered amine light stabilizer,...

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental punctures while providing easy transportation. High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic...

Won't rust, resists rot & hold up to chemically active soil conditions. Corrugated design provides rigidity without bulk when back filled with earth. It will take abuse! Used to insulate the Heat Well below the frost line, preventing the loss of energy...

Mostly used on cattle waterers. Blue plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet.