Farm Equipment Livestock Waterers For Sale In Arlington

This white pin holds the upper arm to the top base.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Robert's 3/4" leather cup ring that fits on the brass plunger.

Specify model 354, 352 or 351 energy free waterer. SPI foamed door only.

Weather seal is for Models 101, 202 & 404 with or without heat. The 101 model takes 1 kit, the 202 & 404 needs 2 kits.

Pride of the Farm Rubber Diaphragm that fits between the orifice & the plunger on a VP124 valve. #6 on breakdown.

White styrofoam triangular disc float only.

The patented door closure system has a set back seal and drain to help counteract the problems associated with door freeze up. This unit is insulated with 3 1/2" of polyurethane insulation.

Use this valve assembly with the J303 with without heat.

This bolt package is for Models 101, 202 & 404 with or without heat.

Pride of the Farm Element for electric waterer units.

Constructed of Cast Aluminum for ultimate efficiency & safety. Thermostatically controlled to only run when needed. Ideal for use in Ponds 50 to 600 gallons. Guaranteed for 3 years & SAFE IN PLASTIC, rubber liners or concrete.

OUR PERFORMANCE ONE BOX STALL DRINKER WINS BY SEVERAL LENGTHS - For corner installations in box stalls--but can be installed outdoors as well. Our chamber can go as low as minus 30 degrees F (-34.4 degrees C).

Float Arm for the Mira Fount M3360, M3410, M3410-4, M3465 waterer.

The brass arm and black round ball float only for an Apex Valve.

Arkfeld waterer element & thermostat replacement. 600 watt x 240 volt heating element with surface mount thermostat included.

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

It has an excellent insulating property of R15 and amazing structural strength. Highly recommended for ALL cold climate installations. The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation.

Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks.

Adjustable, submersible thermostat that can be turned as low as 10 degree turn on up to 80 degree turn off.

The dogs chew on everything so I used the metal housing. These valves are easy to set up and install and their function is so simplistic it is hard for them to fail. I have 2 on troughs for cattle and one for the dogs.

This unit fits the Model 101, 202 & 404 with or without heat.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

This diaphragm fits all Jug Model Valves.

A brass rod float arm 1/4" x 12" with threads on each end. Connects valve to 301 round float.