Farm Equipment Livestock Waterers For Sale In Anchorage

It is a split plastic coupler that fits into the corrugation of the Earth Tube. Used for joining multiple Earth Tubes.

This piece is held by two thumbscrews not included in this part. 6 1/2" orange arm that fits between the lower arm and the float connect.

2-2" drain holes for fast clean out. Double wall DURAROCK construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor. It has simple installation, attractive design & has animal friendly flaps - no ball or float closures...

Available in Forest Green in stock, also available in Ash Grey, Black, Blue, Red & Tan colors for special order. The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental punctures while providing easy transportation.

Black rubber seat to fit inside the Mira Fount RED Plunger in a Mira Fount cattle waterer valve.

No other parts come with the Cam Link. #2 on breakdown. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin. This is the arm that opens & closes the plunger.

SPI Drain Plug (#11) for all New Generation waterers.

This white pin holds the upper arm to the top base.

SPI 3.75" Brass Short Float Stem only.

SPI 351/352 New Generation Gasket.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

The Jug Basic Float Valve fits Models J101, 202, 303 & 404 with or without heat.

2-2" drain holes for fast clean out. Double wall DURAROCK construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor. It has simple installation, attractive design & has animal friendly flaps - no ball or float closures...

The Robert's 3/4" brass valve housing only.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

Farm Innovators floating tank de-icer has a heavy duty anti-chew cord protector with a 1 year guarantee. ICE-N-EASY 1500W, thermostatically controlled to operate only when necessary.

1000 watt x 120 volt heating element only. Arkfeld waterer element replacement.

Must be used with part #400267 Plunger Only. This black seat fits inside the plunger and shuts off the water through the orfice.

Unaffected by ground movement due to freezing & thawing. Corrugated design provides rigidity without bulk when back filled with earth. It will take abuse! Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen...

600 watt x 240 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.

Connects valve to 301 round float. A brass rod float arm 1/4" x 6" with threads on each end.

This repair kit fits the Models 101, 202 & 404 with or without heat.

You should use silicon caulk to assure an airtight fit. Both the water line & the electrical supply can enter from below. The ground mount tube ONLY provides some cold weather protection to your barn stall waterer (not included), but you may need to add...

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.