Farm Equipment Livestock Waterers For Sale In Anaheim

1000 watt x 120 volt heating element only. Arkfeld waterer element replacement.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

This unit has the same description as the J303 EXCEPT THIS UNIT HAS NO HEAT!

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

Robert's 1/2" rubber plunger seat only.

Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. #12-2 on the breakdown. This part number is for the arm only & is usually used on hog troughs.

Connects valve to 301 round float. A brass rod float arm 1/4" x 10" with threads on each end.

Unaffected by ground movement due to freezing & thawing. It will take abuse! Corrugated design provides rigidity without bulk when back filled with earth. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID.

Robert's Brass cotter key that connects the long arm to the valve body.

Designed to fit into narrow opening in any hog waterer resevoir. SAFE IN PLASTIC. Unit measures 7" in diameter, 110v, 1000 Watts. Thermostatically controlled to only run when necessary.

White styrofoam triangular disc float only.

5 year warranty. Up to 50% more usable water capacity than the competition. SPI's energy free waterer is built using 100% polyethylene construction creating a strong corrosion free product to provide many years of trouble free operation.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

It's design reduces stock damage and minimises blockage. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close.

Each opening is 5" x 9", Superb supply line protection. Other components 5 years unconditional warranty and an additional 6 year pro-rated warranty. It has 70 inches of drinking length and holds 70 gallons.

The larger tanks feature incorporated pallet fork opening on the bottom, eliminating accidental punctures while providing easy transportation. High Country Plastics Water tanks are rotational molded with high quality FDA approved UV protected plastic...

Float Arm for the Mira Fount M3360, M3410, M3410-4, M3465 waterer.

It is a split plastic coupler that fits into the corrugation of the Earth Tube. Used for joining multiple Earth Tubes.

The ground mount tube ONLY provides some cold weather protection to your barn stall waterer (not included), but you may need to add heat tape to the water supply line. Both the water line & the electrical supply can enter from below.

Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm. #1 on breakdown. No other parts are included with this Power Link.

Blue Flap for WPM20 Cattle Waterer

O'Ring only replacement for Frost Pro Accessory.

I was purchasing to replace an older one that finally wore out. Was exactly what I needed. After 3 weeks of use, we have no leaks or overflows. The dogs chew on everything so I used the metal housing.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.

Spring loaded pin allows access panel to pop off with the twist of a screwdriver. The Pride of the Farm "King" Energy Efficient drinker is beefy & ruggedly built but simple. More importantly, the vertical wall of our valve cover has PATENTED ports which...

The peaked roof and raised ribs around the door openings prevent manure, feed and other contaminants from being washed into the bowl, and facilitates water run off. The new Next Generation waterer utilizes 4 Quick Release D-Clips to secure the top to...

The Jug Basic Float Valve fits Models J101, 202, 303 & 404 with or without heat.