Farm Equipment Livestock Waterers For Sale In Amarillo

Robert's Brass 1/2" orfice Valve complete with sand plunger and arms.

#12-2 on the breakdown. Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on hog troughs.

This drain plug fits Models 101, 202, 303 & 404 with or without heat.

SPI Rubber door hinges with screws for all of the New Generation energy free waterer. (sold in pairs)

Pride of the Farm Element for electric waterer units.

Corrugated design provides rigidity without bulk when back filled with earth. Won't rust, resists rot & hold up to chemically active soil conditions. It will take abuse! Used to insulate the Heat Well below the frost line, preventing the loss of energy...

White styrofoam round disc float only.

Blue 10 3/4" replacement ball for the Mira Fount 3354S, M3370S, M3390, M3390E cattle waterers & 3360-10 hog waterer.

The Jug Basic Float Valve fits Models J101, 202, 303 & 404 with or without heat.

Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute. Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water pressure increases) Positive on/off operation...

Compared to other "intermittent flow devices", the Ice Sweeper is very dependable, uses less water & shuts off water flow reliably when the threat of the water freezing is gone. * The Ice Sweeper comes with a full 3-year limited replacment warranty, exclusive...

Our drinker has foam filled double wall construction which adds to the efficiency. More importantly, the vertical wall of our valve cover has PATENTED ports which allow natural water circulation and efficient heat dispersal into the drinker troughs.

Robert's 3/4" leather cup ring that fits on the brass plunger.

Unit measures 7" in diameter, 110v, 1000 Watts. SAFE IN PLASTIC. Thermostatically controlled to only run when necessary. Designed to fit into narrow opening in any hog waterer resevoir.

Serves 225 beef, 100 dairy, 175 cow/calf. Optional wing bolts are available for Grade A inspections. Tolerance to water level - you don't have to worry about summer & winter water levels.

#12-3 on the breakdown. Pride of the Farm Plastic 3 5/8" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on the Polar Max waterers.

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

SPI 351 (old style) gasket only.

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

A drain plug for the Arkfeld waterers - 1 1/2" in size - Black rubber.

Our original float valve got broken during the barn remodel. We are all delighted to have the replacement installed - easy to do - and the waterer functioning perfectly.

Replacement Plastic Valve & Float f/ WFD85 and MFD85 field drinkers.

Serves 75 beef, 40 dairy, 30 horses. Optional wing bolts are available for Grade A inspections. Tolerance to water level - you don't have to worry about summer & winter water levels.

All edges have been rounded for safety & strength. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

Warmer water pushes through the ports and cooler water returns under the baffle. Backed with the strongest warranty available. It has 70 inches of drinking length and holds 70 gallons.

Two Year Warranty High Volume - 2400 GPH at 40 PSI Animal Damage-Resistant Design No Float Ball or Moving Parts Unaffected by Freezing Hudson Valve for 1-140 PSI with 1" female thread is 5" high and 3.75" in diameter.