Agiseek home

Engines Truck Parts For Sale In Detroit

Become a Partner
Electric Pressure Washer Hardware Pack for SPX3000
Prices start at : 9.5 USD / each

Pick up your pack. One bag, one price one great neutral color to complement your pressure washer. It doesn't get much better than that. The SPX3000-HP hardware pack contains everything you need to keep your gear in tip-top shape.
  •  Part # SPX3000-HP
  •  Compatible with the SPX3000 electric pressure washer
  • Returnable: 90-Day
  • Manufacturer Warranty: Satisfaction Guaranteed
  • Part Type: Tune-Up Kit
  • Product Width (in.): 5 in
Michigan
Detroit
Auger Clutch Cable
Prices start at : 37.16 USD / each

Genuine Murray replacement part. This OEM part ensures proper fit and performance to maintain the life of your Murray Equipment.
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  Briggs & Stratton genuine product
  • Manufacturer Warranty: 1 yr Limited
  • Hub Required: No hub connection available
  • Product Width (in.): 34 in
  • Fits Brands: Briggs and Stratton
Michigan
Detroit
Used Rear Engine Mount
Prices start at : 85.00 USD

Used Rear Engine Mount, Type: Rear Engine Mount
  • Part Number: D62-1017
  • Year: Unknown
  • Stock Number: 548-10370
Michigan
Detroit
Exhaust Gasket
Prices start at : 3.63 USD / each

They eventually shrink, causing fuel and air leaks that lead to poor engine performance. The proper gasket for your engine depends on the engine's design; therefore, we recommend that you check your engine Illustrated Parts List.
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  Fits most 13, 14, 15 and 15.5 GHP intek OHV vertical 210000, 212000, 214000, 215000 model Briggs & Stratton engines
  •  There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
  • Returnable: 90-Day
  • Product Height (in.): 5
Michigan
Detroit
2011 Cummins ISX Engine Mount
Prices start at : 75.00 USD

(USED) CUMMINS ISX Mount: A/C COMPRESSOR ISX ENGINE REFRIGERNAT COMPRESSOR MOUNT
  • Quantity: 1
  • Model: ISX
  • Year: 2011
  • Stock Number: 24479025
Michigan
Detroit
Carburetor Primer Bulb for Quantum Engines
Prices start at : 3.05 USD / each

Briggs & Stratton Carburetor parts allow your Carburetor to mix the right amount of gas with air so the engine runs properly. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum...
  • Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts: Yes
  • Engine Part Type: Bulb
  • Manufacturer Warranty: One year limited warranty
  • Part Type: Engine Part
  • Product Width (in.): 0.25
  • Returnable: 90-Day
Michigan
Detroit
Detachable Deck Plate for Gemini Jr. Convertible Hand Truck
Prices start at : 81.83 USD / each

Spans the length and width of the Gemini frame to prevent smaller items from falling in between frame cross braces. Can be easily installed and removed from the frame in seconds. Magliner's detachable deck plate for convertible hand trucks provides a...
  •  Compatible with Gemini Jr. convertible hand trucks with die case noses only
  •  Install and remove without tools
  •  Deck is 43-1/2 in. L x 12. In W
  • Manufacturer Warranty: One year warranty from date of purchase against defects in workmanship or material.
  • Fits Models: All Magliner brand hand trucks
  • Returnable: 90-Day
Michigan
Detroit
Fuel Tank Gasket Replacement for 272409, 271592, 27911 and 555084
Prices start at : 4.82 USD / each

They eventually shrink, causing fuel and air leaks that lead to poor engine performance. The proper gasket for your engine depends on the engine's design; therefore, we recommend that you check your engine Illustrated Parts List.
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  For Intek vertical twin engines
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  • Product Width (in.): 0.25
  • Part Type: Engine Part
  • Product Depth (in.): 4
Michigan
Detroit
Used Cummins ISB Crank Balancer
Prices start at : 85.00 USD

Used ISB Crank Balancer, Position: Crankshaft, Diameter: 9 7/8"
  • Model: ISB
  • Position: Crankshaft
  • Stock Number: 521-10937
  • Part Number: 4991131
Michigan
Detroit
18-HP 440cc 1 in. Shaft 4-Stroke Overhead Valve Portable Electric Start Engine
Prices start at : 375.00 USD / each

Suitable for building your own gas powered applications to the way you want. Perfect for Log Splitters, Pressure Washer, Go Carts, Roto Tillers Caltivators, Mobile Carwash and many more.
  •  Runs on standard 87 octane gasoline
  •  Engine can handle everything you can throw at it
  • Oil Capacity (oz.): .6
  • Product Height (in.): 18
  • Engine Displacement (cc): 440
  • Fits Brands: DuroMax
Michigan
Detroit
Air Vane Spring
Prices start at : 5.34 USD / each

A fatigued spring can cause malfunction of the choke which could result in hard starting or no starting at all. Meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton.
  •  There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  • Returnable: 90-Day
  • Engine Part Type: Air Vane Spring
  • Manufacturer Warranty: One year limited warranty
  • Product Height (in.): .75
Michigan
Detroit
Starter Motor
Prices start at : 106.93 USD / each

A connection inside the engine then allows electricity to flow to the starter motor. The circuit cannot be completed when a solenoid goes bad and the starter will not get the electricity needed to start the motor.
  •  There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  • Returnable: 90-Day
  • Engine Part Type: Starter Motor
  • Product Depth (in.): 3.5
Michigan
Detroit
Replacement Magneto Armature
Prices start at : 36.24 USD / each

Other parts of the magneto include the ignition and armature, around which the primary and secondary coils are wrapped. When replacing any magneto/ignition parts, always ensure that the armature gap is set to your engine model's specifications.
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  • Part Type: Engine Part
  • Engine Part Type: Armature
  • Product Width (in.): 4
Michigan
Detroit
Needle Seat Kit for Quantum 5-6 HP Vertical and 3.5-5 Industrial Plus Engines
Prices start at : 4.75 USD / each

Briggs & Stratton carburetors and carburetor parts allow your carburetor to mix the right amount of gas with air so the engine runs properly. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to...
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
  • Product Depth (in.): 0.193
  • Product Height (in.): 4.25
  • Part Type: Engine Part
Michigan
Detroit
Gas Cap for Kohler XT-6 Engine - CARB Compliant
Prices start at : 12.99 USD / each

This cap fits on walk mowers with Kohler XT-6 CARB compliant engines. It's a genuine OEM part, so you can be comfortable knowing you're getting the right part and the best quality.

4

    • Fits Models: XT-6 series walk behind engines
    • Product Width (in.): 4
    • Product Height (in.): 1
    • Fits on KOHLER XT-6 series walk behind engines: Yes
    • Product Depth (in.): 4
    • Used With Equipment Type: Walk-Behind Mower
    Michigan
    Detroit
    Remote Safety Switch for Tow Behind Mower
    Prices start at : 61.2 USD / each

    The most important safety system on the tow behind mower is the operator. But this mower remote shutdown switch can be secured within easy reach of the towing vehicle operator during mower operation to protect the safety of the operator or the mower engine...
    •  Also, the safety switch should be used to shut down operations if the mower begins to slide down a slope or into a ditch, if it becomes jack-knifed during towing, or if there is a loss of braking power on the towing vehicle
    •  The operator is responsible to be aware of the surroundings, focus on safe operation of the mower and be prepared to shut the engine down immediately, if necessary
    •  This switch enables a safe shut down of the engine and mower in the case of an emergency
    •  Use the remote shut-down switch to stop the blades if any emergency situation or serious operating issue arises, the following are examples of occurrences when the shut-down, any unusual noise or excessive vibration coming from the mower or any unexpected noise or vibration are usually a sign of an oncoming problem, any person, child, animal, or personal property is in the mowing area

    2

      • Product Depth (in.): 2
      • Product Width (in.): 2
      Michigan
      Detroit
      24 HP Commerical Turf Series V-Twin Engine
      Prices start at : 981.67 USD / each

      Briggs & Stratton builds the engines most of America's best leading power equipment brands depend on. We're also the engine most preferred by consumers nearly 60 million households trust their yard care to Briggs & Stratton power.
      •  Float-feed carburetor
      •  Overhead valve design (OHV) for cooler operation
      •  Crankshaft: 1-1/8 in. Dia x 4-5/16 in. long, keyway, tapped 7/16-20
      • Returnable: 90-Day
      • Part Type: Engine Part
      • Fits Brands: multiple
      Michigan
      Detroit
      Purge Bulb Kit
      Prices start at : 12.97 USD / each

      Be proactive with your ECHO equipment maintenance and keep it running like new season after season with a genuine ECHO replacement purge bulb. A properly operating purge bulb is key to fast, easy starts.
      •  Save money and install yourself
      •  Product may vary by store
      • Part Type: Engine Part
      • Product Width (in.): 2.875 in
      • Fits Models: Fits most ECHO Trimmers, Brushcutters, Edgers, Hedge Trimmers, Blowers, Chainsaws, Tillers & PAS
      • Returnable: 90-Day
      Michigan
      Detroit
      Cummins Front Engine Mount
      Prices start at : 125.00 USD

      Front Engine Mount, Type: Front Eng Mount
      • Type: Front Eng Mount
      • Stock Number: 502-13814
      • Model: L10 / M11
      • Part Number: 3819498
      Michigan
      Detroit
      0.5 in. x 0.5 in. x 0.1 in. Sealing Washer
      Prices start at : 3.05 USD / each

      It is necessary to properly secure different fasteners to the engine. Please refer to the correct engine model parts manual to ensure you have the correct washer for your engine. This sealing washer is used on a variety of different engines.
      •  Used on Vanguard model 29,30,35, and 38 engines.
      •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
      •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
      • Product Height (in.): 0.1
      • Part Type: Engine Part
      • Engine Part Type: Seal
      Michigan
      Detroit
      24 in. Plate Type Folding Nose for 2-wheel Hand Truck
      Prices start at : 62.99 USD / each

      Low profile design folds flat against the hand truck frame when not in use. Strong aluminum plate is impact resistant and will not corrode. Plate type folding nose for 2-wheel hand truck extends the overall hand truck nose depth to 24 in.
      •  Solid plate design is perfect for transporting small items
      •  Bolted construction is easy to install
      • Product Depth (in.): 28.5
      • Returnable: 90-Day
      • Fits Models: All Magliner brand hand trucks
      • Product Height (in.): 1.5
      Michigan
      Detroit
      18 in. x 7-1/2 in. Die Cast Aluminum Nose with Recessed Heel
      Prices start at : 38.65 USD / each

      Magliner's 18 in. This hand truck nose is recess mounted within the hand truck frame. Die cast aluminum nose with recessed heel is strong yet lightweight. Compatible with Magliner folding noses.
      •  Compatible with Magliner 2-wheel hand trucks
      •  Reinforced material in high-stress areas prevents breakage under heavy loads
      •  Resistant to corrosion
      •  Heel is recessed to allow for cylindrical items to nest within a curved hand truck frame
      • Fits Brands: Magliner
      • Returnable: 90-Day
      Michigan
      Detroit
      Replacement Cutting Guide for Select Swisher String Trimmers
      Prices start at : 8.49 USD / each

      It also protects the bottom of the shaft from debris and wear. Refer to owner's manual for installation instructions. The Swisher trimmer cutting guide ensures you leave your yard damage free.
      •  Protects your yard from damage
      •  For use with select Swisher trimmers
      • Returnable: 90-Day
      • Used With Equipment Type: String Trimmer
      • Fits Models: STD4422HO, STD67522BS, STP4422HO, STP67522BS and STS67522BS
      • Part Type: Edger Blade
      Michigan
      Detroit
      1 in. 9 HP 270cc OHV Recoil Start Horizontal Keyway Shaft Gas Engine
      Prices start at : 299.55 USD / each

      LIFAN Power USA's 9 MHP (Maximum Horsepower) Industrial Grade OHV Gasoline Engine is EPA Certified, extremely quiet and dependable and is covered with our Warranty Policy. This engine has a 1.58 gallon fuel tank and is EPA approved.
      •  Assembled dimension: 20 in. W x 19 in. D x 18 in. H
      •  9 HP horizontal shaft design for heavy duty/industrial application
      •  Highly efficient splash lubrication system
      • Manufacturer Warranty: 3 Year Warranty
      • Brand/Model Compatibility: Universal
      • Certifications and Listings: 1-UL Listed
      Michigan
      Detroit
      Fuel Pump Kit
      Prices start at : 5.73 USD / each

      Briggs & Stratton fuel pumps have either a plastic or a metal body and develop pressure using the vacuum in the crankcase, which is created by the motion of the piston. A fitting on the crankcase cover or the dipstick tube draws the pressure to pump fuel.
      • Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts: Yes
      • Product Width (in.): 5.25
      • Product Height (in.): 4.25
      • Engine Part Type: Fuel
      • Returnable: 90-Day
      • Manufacturer Warranty: One year limited warranty
      Michigan
      Detroit
      Portable 16 HP 1 in. Shaft Gas-Powered Recoil/Electric Start Engine
      Prices start at : 324.99 USD / each

      The Duromax Portable 16 HP 1 in. Shaft Gas-Powered Recoil/Electric Start Engine is perfect for a variety of applications. A recoil start with compression release facilitates easy pulls.
      •  Ability to build your own log splitter, go-karts and more
      •  Transistorized magneto ignition system
      • Recommended Oil Type: SAE 5W-30
      • Product Width (in.): 18.5
      • Oil Capacity (oz.): 0.6
      • Product Weight (lb.): 82lb
      Michigan
      Detroit
      Oil Fill Cap
      Prices start at : 1.96 USD / each

      The 281658S oil cap is a genuine OEM part precisely manufactured to perfectly fit on most Briggs & Stratton Model 091000 engines with an angled oil fill neck. The 281658S replaces previous Briggs & Stratton part numbers 66768, 555037 and 281658.
      •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
      •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
      •  There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
      • Returnable: 90-Day
      • Product Depth (in.): 1
      • Part Type: Engine Part
      Michigan
      Detroit