Agiseek home

Engines Engine Parts Replacement Engines Parts For Sale In West Valley City

Become a Partner
5/8 in. 3 HP 97.7cc OHV Recoil Start Horizontal Shaft Gas Engine
Prices start at : 149.00 USD / each

The LIFAN 3 MHP 97.7 cc Horizontal Shaft Gasoline Engine is ideal for cement mixers, roofing elevators, paint sprayers, aerators, agricultural equipment and construction equipment.
  •  97.7cc for reliable power
  •  Splash-lubrication system provides efficiency
  • Used With Equipment Type: Utility
  • Recommended Oil Type: SAE10W30
  • Part Type: Engine
  • Returnable: 90-Day
Utah
West Valley City
Spindle Assembly for Most 46 in. Lawn Tractors and RZT Mowers 2010 and After 618-04865
Prices start at : 79.99 USD / each

For best mowing results, it is recommended to routinely inspect spindles, blades and pulleys, and replace them when they show signs of wear or damage. A spindle is an integral component on any riding mower deck.
  •  Fits most Cub Cadet lawn tractors and RZT mowers with 46 in. decks 2010 and after
  •  Consult owner's manual for installation instructions
  • Product Height (in.): 8
  • Part Type: Spindle
  • Returnable: 90-Day
  • Used With Equipment Type: Riding Mower
Utah
West Valley City
1 in. 15 HP 420cc OHV Electric Start Horizontal Keyway Shaft Gas Engine
Prices start at : 351.15 USD / each

LIFAN Power USA's 15 MHP (maximum horsepower) Industrial Grade OHV Gasoline Engine is EPA certified, extremely quiet and dependable. 15 MHP engines are also available with electric start, 18-amp charging systems, 2:1 clutch reduction and 6:1 gear reduction.
  •  Splash-lubrication system provides efficiency
  •  15 HP for powerful performance
  •  Adjustable throttle is easy to access
  • Part Type: Engine
  • Product Width (in.): 21
  • Manufacturer Warranty: 3 Year Warranty
Utah
West Valley City
Detachable Deck Plate for Gemini Sr. Convertible Hand Truck
Prices start at : 76.04 USD / each

Can be easily installed and removed from the frame in seconds. Magliner's detachable deck plate for convertible hand trucks provides a solid surface area to prevent smaller packages from falling through.
  •  Compatible with Gemini Sr. convertible hand trucks with die case noses only
  •  Install and remove without tools
  •  Gemini Sr. hand truck not included
  • Product Width (in.): 12
  • Part Type: Wheel/Tire
  • Product Height (in.): 1.25
Utah
West Valley City
196cc General Purpose Replacement Gas Engine
Prices start at : 133.05 USD / each

The Champion Power Equipment 100220 196cc General Purpose Replacement Engine is designed to provide reliable power for most small engine applications. Square (5/16 in. Fuel tank and a 0.6-quart oil capacity (recommended 10W-30).
  •  Efficient – 4-stroke durable OHV design for clean and cool operation, produces a max torque of 8.1 lb-ft at 2800 RPM
  •  Comes with a 0.9 gallon fuel tank and a 0.6 qt. oil capacity
  • Engine Make: OEM Branded
  • Fits Models: It is designed to provide reliable power for most small engine applications
  • Certifications and Listings: cUL Listed
  • Product Depth (in.): 12.1 in
Utah
West Valley City
Starter Rope and Grip
Prices start at : 4.75 USD / each

If your rewind binds when you pull it or does not rewind freely, it may be time to replace it. The rewind starting/recoil system is operated by pulling a starter rope. The rope is attached to a pulley and return spring that spin the flywheel to start...
  •  There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
  •  1-year limited warranty
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  • Product Width (in.): 6.125
  • Product Height (in.): 3.125
Utah
West Valley City
L-Head Single Cylinder Engine Manual
Prices start at : 22.95 USD / each

For most Single Cylinder L-Head (side valve) engines built after 1981. Contains over 350 pages. Shop manual contains common specifications and detailed, easy-to-follow instructions on how to adjust, tune-up and repair.
  •  Briggs and Stratton Manual
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton maintenance manuals
  • Product Height (in.): 11
  • Used With Equipment Type: Walk-Behind Mower
  • Fits Brands: N/A
  • Returnable: 90-Day
Utah
West Valley City
Inline Fuel Shut Off Valve
Prices start at : 4.69 USD / each

Valves control the flow of fuel vapor into the combustion chamber and the flow of exhaust gases leaving the engine. Then, if the valves are not badly worn and the parts are not damaged, you can replace the valves and seats so that the valves seal effectively.
  • Fits Models: Multiple
  • Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts: Yes
  • Part Type: Engine Part
  • Manufacturer Warranty: One year limited warranty
  • Engine Part Type: Valve
  • Used With Equipment Type: Walk-Behind Mower
Utah
West Valley City
Ignition Key Kit for Snow Blower
Prices start at : 7.99 USD / each

Attach the key to a lanyard or key chain to keep it safe and visible. The replacement key for your Toro snowblower is made of durable thermoplastic polyurethane and is engraved with the Toro name.
  •  Made from durable thermoplastic polyurethane and engraved with the Toro name
  •  Replacement key is designed to fit snugly into engine ignition switch
  • Part Type: Engine Part
  • Product Width (in.): 5.5 in
  • Returnable: 90-Day
  • Fits Brands: Toro
Utah
West Valley City
Fuel Tank Cap
Prices start at : 8.09 USD / each

If fuel is leaking from the cap, a properly fitted replacement cap can solve the problem. The fuel tank cap provides a number of critical functions such as preventing gas tank fumes from leaving the tank as well as protecting the fuel from outside contamination...
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  • Returnable: 90-Day
  • Product Height (in.): 3
  • Engine Part Type: Cap
  • Manufacturer Warranty: 1 year limited
Utah
West Valley City
Fuel Tank Gasket Replacement for 272410 and 271928
Prices start at : 2.86 USD / each

The proper gasket for your engine depends on the engine's design; therefore, we recommend that you check your engine Illustrated Parts List. Gaskets and O-rings help seal the engine, the air cleaner and other systems against dirt and debris are also common...
  • Product Width (in.): 0.25
  • Returnable: 90-Day
  • Manufacturer Warranty: One year limited warranty
  • Product Height (in.): 6
  • Engine Part Type: Gasket
  • Part Type: Engine Part
Utah
West Valley City
Granckcase Gasket
Prices start at : 6.16 USD / each

The proper gasket for your engine depends on the engine's design; therefore, we recommend that you check your engine's Illustrated Parts List. Gaskets, O-Rings, Seals and Washers help seal the engine, the air cleaner and other systems against dirt and...
  • There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specification and provide full warranty coverage, always use genuine parts from Briggs & Stratton: Yes
  • Engine Part Type: Gasket
  • Manufacturer Warranty: One year limited warranty
  • Product Width (in.): 8.25
  • Part Type: Engine Part
  • Returnable: 90-Day
Utah
West Valley City
10.5 HP Vertical OHV Engine
Prices start at : 434.81 USD / each

We know what it's like to have your name on the line. Briggs & Stratton builds the engines most of America's best leading power equipment brands depend on. America's most-trusted brands count on Briggs & Stratton power to stand behind their promise of...
  • Returnable: 90-Day
  • Brand/Model Compatibility: Briggs & Stratton Replacement Engine
  • Manufacturer Warranty: Consumer Use: 2 Years / Commercial Use: 1 Year
  • Used With Equipment Type: Riding Mower
  • Orientation: Vertical
  • Product Width (in.): 21
Utah
West Valley City
Small Engine Carburetor Replaces for 790206 and 790218
Prices start at : 27.4 USD / each

Briggs & Stratton carburetors allow your engine to receive the right amount of gas mixed with air so the engine runs properly. Always refer to the instructions in the operator's manual before making repairs.
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts, such as this carburetor that will mix just the right amount of gasoline with air so that the engine runs properly
  • Product Height (in.): 2.781
  • Product Depth (in.): 3.375
  • Product Width (in.): 4
Utah
West Valley City
Small Engine Carburetor Replaces for 498811, 795469, 794147, 699660
Prices start at : 23.68 USD / each

Briggs & Stratton carburetors allow your engine to receive the right amount of gas mixed with air so the engine runs properly. Always refer to the instructions in the operator's manual before making repairs.
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts, such as this carburetor that will mix just the right amount of gasoline with air so that the engine runs properly
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  • Product Width (in.): 4
  • Part Type: Engine Part
  • Product Depth (in.): 3.375
  • Product Height (in.): 2.781
Utah
West Valley City
Carburetor Overhaul Kit for 3.5-4 HP Max Series Quantum and 5 HP Industrial Plus Engines
Prices start at : 8.97 USD / each

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Help keep your outdoor power equipment running at peak performance by using Briggs...
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
  • Product Depth (in.): 3.438
  • Product Width (in.): 4
  • Part Type: Engine Part
Utah
West Valley City
Cold Weather Breather Heater Kit 9-22 kW Air Cooled Generators
Prices start at : 84.99 USD / each

Also consider model 7101 Battery warmer and 7102 oil warmer cold weather accessories (compatible on both 50 or 60 hertz units). The Breather warmer is only for use in extreme cold weather applications where heavy icing occurs.
  •  Remove the old component before installing the new
  •  Compatible on both 50 or 60 Hz units
  •  All products come with a 1 year limited warranty
  • Fits Models: 9-22kw Air Cooled Generators
  • Returnable: 90-Day
  • Part Type: Engine
Utah
West Valley City
Fuel Pump
Prices start at : 15.3 USD / each

A fitting on the crankcase cover or the dipstick tube draws the pressure to pump Fuel. A Fuel pump is used when the Fuel tank is mounted lower than the Carburetor and cannot rely on gravity to carry Fuel through the Fuel line.
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
  •  150 micron
  • Returnable: 90-Day
  • Product Width (in.): 0.1
  • Engine Part Type: Fuel Pump
Utah
West Valley City
2 in. x 1.75 in. x 0.5 in. Friction Pawl-Plate
Prices start at : 2.89 USD / each

An integral part of the rope start system on small vertical engines, the Friction Pawl-Plate makes the connection between the recoil and the engine flywheel. If your recoil slips when you are pulling the rope to start your motor, it is possible the Friction...
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  • Manufacturer Warranty: 1 Year Limited
  • Engine Part Type: Pawl-Plate
  • Product Depth (in.): 2
  • Part Type: Engine Part
Utah
West Valley City
Handle for 30 In. Wide Aluminum Platform Truck
Prices start at : 28.28 USD / each

Compatible with 30” wide Magliner platform truck. Magliner's removable platform truck handle is lightweight and designed for strength. The handle's bent looped shape proves user comfort and convenience.
  •  Looped shape allows handle to be gripped in different places, providing comfort and convenience
  •  Fits 30" wide Magliner aluminum platform truck
  •  Fits interchangeably on either 30” side of the deck.
  • Product Depth (in.): 33
  • Product Height (in.): 5.5
  • Part Type: Wheel/Tire
Utah
West Valley City
Pressure Washer Pump
Prices start at : 134.51 USD / each

It is important to use only genuine parts to ensure proper performance of you pressure washer. The pressure washer pump is designed to create the necessary pressure to maximize the cleaning potential of the unit.
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
  • Engine Part Type: Pump
  • Manufacturer Warranty: One year limited warranty
  • Part Type: Engine Part
Utah
West Valley City
Tow Bar Assembly for Chipper Shredder
Prices start at : 74.99 USD / each

No back-breaking lifting and pulling. Pull your Chipper/Shredder easily with a garden tractor using an Earthquake Tow Bar. Simplifies gardening and yard work.
  •  Adjustable length rod
  •  All hardware included for easy assembly
  • Returnable: 90-Day
  • Product Depth (in.): 30
  • Used With Equipment Type: Chippers/Shredder
  • Product Height (in.): 10
Utah
West Valley City
1 in. x .75 in. x 1 in. Grommet
Prices start at : 3.45 USD / each

It is important to keep these connections in place to maintain EPA emission compliance. The grommet makes the connection from the breather tube to either the breather itself or the carburetor, depending on the engine model.
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
  •  Used on small vertical engine model 08P502
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  • Product Depth (in.): 1
  • Product Height (in.): 0.75
  • Manufacturer Warranty: 1 Year Limited
Utah
West Valley City
Replacement Belt Guard for Select Swisher Deluxe String Trimmers
Prices start at : 48.99 USD / each

Used with select Swisher trimmers. Swisher's Replacement belt guard keeps your trimmer running safely. Refer to owner's manual for installation instructions.
  •  Keeps the trimmer belt safely covered
  •  1 replacement belt guard
  •  Constructed of hard plastic
  •  For use with select Swisher trimmer models
  • Product Width (in.): 13
  • Part Type: Engine Part
Utah
West Valley City
Replacement Handle Bolts with Knobs
Prices start at : 3.98 USD / each

In addition to reliable parts and accessories, Arnold's easy-to-follow instructions and extra tips will ease your equipment maintenance and assure that you get the job done right. Arnold has everything you need to keep equipment running the way it should...
  •  5/16-18:1.00 bolt as well as 5/16-18:2.00 bolt with a curved head
  •  Includes 2 T-handles, 1 set of short bolts and 1 set of long bolts
  •  Fits most lawn mowers, snow throwers and other outdoor equipment
  • Product Width (in.): 4.75
  • Product Height (in.): 6.60
  • Fits Models: Universal
Utah
West Valley City
13 in. Long x 8 in. Wide Accessory Bag for 2-wheel Hand Trucks
Prices start at : 25.99 USD / each

Top flap covers main opening to prevent rain from entering the bag. Magliner's accessory bag for 2-wheel hand trucks provides a sturdy and convenient place to store small items that would otherwise be hand-carried.
  •  Hand truck frame not included
  •  Heavy-duty straps tighten bag securely to frame and keeps the bag out of the way
  •  Main pocket is 12 in. L x 8 in. W x 2 in. D with 1 self-adhesive strap
  • Manufacturer Warranty: One year warranty from date of purchase against defects in workmanship or material.
  • Fits Brands: Magliner
  • Product Width (in.): 8
Utah
West Valley City
6.5 HP Gross Horizontal Vanguard Gas Engine
Prices start at : 482.91 USD / each

Briggs & Stratton builds the engines most of America's best leading power equipment brands depend on. For more than 100 years, we've been living up to ours. We know what it's like to have your name on the line.
  •  Horizontal engine
  •  Low oil shutdown system significantly reduces the chance of engine damage due to insufficient lubrication
  •  Recoil start with auto compression release
  •  Overhead valve design (OHV) for cooler operation
  •  Commercial-style carburetor with additional fuel passages that ensure reliable starts and smooth running operation at a wide range of loads
  • Product Height (in.): 18
Utah
West Valley City