Agiseek home

Engine Parts Truck Parts For Sale In Winston Salem

Become a Partner
1 in. 15 HP 420cc OHV Recoil Start Horizontal Shaft Gas Engine
Prices start at : 306.1 USD / each

The 15 MHP recoil start engine comes with a low oil shutdown for protection. LIFAN Power USA's 15 MHP (maximum horsepower) Industrial Grade OHV Gasoline Engine is extremely quiet and dependable.
  •  Ideal for many applications where 15 HP horizontal shaft engines are required such as construction equipment, agricultural equipment or recreational vehicles
  •  Features low oil shutdown for protection
  •  Assembled dimension: 18 in. W x 19 in. D x 20 in. H
  • Product Depth (in.): 19
  • Manufacturer Warranty: 3 Year Warranty
  • Orientation: Horizontal
North Carolina
Winston-Salem
18 HP Gas V-Twin Engine
Prices start at : 1169.81 USD / each

Indeed there is performance magic in the V-Twin engine. Despite their high power, like all Subaru engines, they boast maximum durability, easy starts and low exhaust emission. Delivering high power and performance in a small package, these four-cycle...
  • Certifications and Listings: No Certifications or Listings
  • Manufacturer Warranty: See limited engine warranty pdf file
  • Product Depth (in.): 12.5
  • Product Width (in.): 18.75
  • Engine Make: Subaru
  • Orientation: Horizontal
North Carolina
Winston-Salem
19 HP 1 in. Crankshaft Intek Vertical OHV Engine
Prices start at : 579.48 USD / each

For more than 100 years, we've been living up to ours. We're also the engine most preferred by consumers nearly 60 million households trust their yard care to Briggs & Stratton power.
  • Brand/Model Compatibility: Briggs & Stratton Replacement Engine
  • Engine Make: Briggs and Stratton
  • Vertical engine: Yes
  • Product Height (in.): 21
  • Fuel Tank Capacity (gallons): 0
  • Fits Models: multiple
North Carolina
Winston-Salem
Replacement Magneto Armature Coil
Prices start at : 33.54 USD / each

When replacing any magneto parts, always ensure that the armature gap is set to your engine model's specifications. Other parts of the magneto include the ignition and armature, around which the primary and secondary coils are wrapped.
  • Product Depth (in.): 2.781
  • Returnable: 90-Day
  • Engine Part Type: Armature
  • Product Height (in.): 3.375
  • Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations: Yes
  • Product Width (in.): 4
North Carolina
Winston-Salem
Exhaust Gasket
Prices start at : 3.63 USD / each

The proper gasket for your engine depends on the engine's design; therefore, we recommend that you check your engine Illustrated Parts List. They eventually shrink, causing fuel and air leaks that lead to poor engine performance.
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  Fits most 13, 14, 15 and 15.5 GHP intek OHV vertical 210000, 212000, 214000, 215000 model Briggs & Stratton engines
  • Product Width (in.): 0.25
  • Returnable: 90-Day
  • Product Depth (in.): 4
  • Product Height (in.): 5
North Carolina
Winston-Salem
Starter Motor
Prices start at : 93.88 USD / each

Manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. To maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton.
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards
  •  There are no substitutes when it comes to keeping engine powered equipment healthy
  • Product Width (in.): 8.188
  • Returnable: 90-Day
  • Product Depth (in.): 5.063
  • Part Type: Engine Part
North Carolina
Winston-Salem
8-1/2 in. x 2-1/2 in. Wheel Guard Kit for 2-Wheel Hand Truck
Prices start at : 15.19 USD / each

Great when transporting soft-sided or bagged items. The wheel guards mount to the hand truck wheel brackets. Magliner's hand truck wheel guards prevent loads from rubbing against hand truck wheels.
  •  8-1/2 in. x 2-1/2 in. hand truck wheel guards
  •  Kit includes 2 wheel guards and mounting hardware
  •  Made out of aluminum which is lightweight and will not rust
  •  Compatible with Magliner 2-wheel hand trucks
  • Product Depth (in.): 8.5
  • Product Height (in.): .5
North Carolina
Winston-Salem
1 in. 13 HP 389cc OHV Electric Start Horizontal Keyway Shaft Gas Engine
Prices start at : 336.58 USD / each

The design features a universal mounting bolt pattern and has a 1 in. Horizontal output shaft. This gas engine has a 1.7-gallon fuel tank and is EPA approved. The electric and recoil start engine comes with a low oil shutdown for protection.
  •  Horizontal shaft design for heavy duty and industrial applications
  •  Assembled dimension: 19 in. W x 19 in. D x 20 in. H
  •  8.0:1 compression ratio
  • Product Height (in.): 20
  • Manufacturer Warranty: 3 Year Warranty
  • Product Depth (in.): 19
North Carolina
Winston-Salem
Used Volvo Rear Engine Mount
Prices start at : 100.00 USD

Used Rear Engine Mount, Type: Rear Engine Mount
  • Part Number: 21606355
  • Year: Unknown
  • Stock Number: 548-10937
North Carolina
Winston-Salem
Push Rod
Prices start at : 4.68 USD / each

Please consult owner's manual for proper part number. This OEM part has a specialized design that has been exactly engineered to fit your engine. Push Rods are used to open the valves of your outdoor power equipment engine.
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  • Manufacturer Warranty: One year limited warranty
  • Product Depth (in.): .25
  • Part Type: Engine Part
  • Product Height (in.): 9.5
North Carolina
Winston-Salem
Replacement Height Adjustment Assembly for Mowers
Prices start at : 19.38 USD / each

Heavy duty metal construction. The handle folds down to avoid accidental adjustments while mowing. The Swisher Replacement Height Adjustment Assembly provides infinite incremental cutting height for your machine.
  •  Assembly includes - tube, height sticker, crank arm and knob
  •  Adjusts the mower's cutting height
  •  Folding adjustment handle
  • Product Width (in.): 2.5
  • Used With Equipment Type: Pull-Behind Mower
  • Part Type: Handle Bolt
North Carolina
Winston-Salem
Replacement Rocker Cover Gasket
Prices start at : 6.78 USD / each

The proper gasket for your engine depends on the engine's design; therefore, we recommend that you check your engine Illustrated Parts List. They eventually shrink, causing fuel and air leaks that lead to poor engine performance.
  • Product Height (in.): 6
  • Returnable: 90-Day
  • Product Width (in.): 0.25
  • Engine Part Type: Gasket
  • There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton: Yes
  • Part Type: Engine Part
North Carolina
Winston-Salem
Spark Plug for Platinum
Prices start at : 8.47 USD / each

Set spark plug gap according to operator's manual. Briggs & Stratton spark plug resists fouling/corrosion providing easy starting and improved engine performance. The electrodes on a spark plug must be clean and sharp to produce the powerful spark required...
  •  Replaces CJ8, RCJ8, J19LM, RJ19LM
  •  There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  • Returnable: 90-Day
  • Part Type: Engine Part
  • Product Depth (in.): 1
North Carolina
Winston-Salem
Used Rear Eng Mount
Prices start at : 75.00 USD

Used Rear Eng Mount, Type: Rear Eng Mount
  • Type: Rear Eng Mount
  • Quantity: 1
  • Part Number: D62-6071R
North Carolina
Winston-Salem
Replacement Blade Bearing for Rough-Cut Tow-Behind Mowers
Prices start at : 14.73 USD / each

Swisher replacement bearings assist in excellent blade cutting. This replacement bearing works with select Swisher Rough-Cut Trailcutters. Keep your Swisher mower running nicely with Swisher's replacement blade bearing.
  •  Slip fit
  •  For replacing blade bearings on select Swisher mowers
  •  O.D. 2-in. I.D. 1 in.
  • Product Depth (in.): 1.75
  • Manufacturer Warranty: None
  • Returnable: 90-Day
North Carolina
Winston-Salem
Intek V-Twin Overhead Valve
Prices start at : 20.9 USD / each

To maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton. Model series 405700, 406700, 407700, 40F700, 40G700, 40H700, 445700 and 446700.
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  •  There are no substitutes when it comes to keeping engine powered equipment healthy
  • Manufacturer Warranty: 1 Year Limited
  • Product Depth (in.): .25
  • Returnable: 90-Day
  • Product Width (in.): 8.25
North Carolina
Winston-Salem
Replacement Handle Bolts with Knobs
Prices start at : 3.98 USD / each

In addition to reliable parts and accessories, Arnold's easy-to-follow instructions and extra tips will ease your equipment maintenance and assure that you get the job done right. With Arnold you can be confident of a reliable product with accurate fit,...
  •  Fits most lawn mowers, snow throwers and other outdoor equipment
  •  5/16-18:1.00 bolt as well as 5/16-18:2.00 bolt with a curved head
  •  Installs easily without tools
  • Manufacturer Warranty: None
  • Fits Brands: Universal
  • Part Type: Handle Bolt
North Carolina
Winston-Salem
Genuine Cummins Isx Engine Bracket 3683914
Prices start at : 109.9900 USD

GENUINE CUMMINS ISX ENGINE BRACKET 3683914
  • Stock Number: 502-14016
  • Year: Unknown
  • Part Number: 3683914
North Carolina
Winston-Salem
Used International T444 Right Rear Engine Mount
Prices start at : 75.00 USD

Used T444 Right Rear Engine Mount, Type: Right Rear Engine Mount
  • Model: T444
  • Part Number: 1664749C2
  • Type: Right Rear Engine Mount
  • Quantity: 1
North Carolina
Winston-Salem
Used Cummins M11 Cover Plate
Price : CALL

USED CUMMINS M11 COVER PLATE
  • Year: Unknown
  • Stock Number: 14209
North Carolina
Winston-Salem
1 in. 15 HP 420cc OHV Electric Start Horizontal Keyway Shaft Gas Engine
Prices start at : 351.15 USD / each

15 MHP engines are also available with electric start, 18-amp charging systems, 2:1 clutch reduction and 6:1 gear reduction. Horizontal keyway output shaft or a tapered shaft (for generator engine replacement).
  •  Splash-lubrication system provides efficiency
  •  Features an electric start
  • Engine Displacement (cc): 420
  • Product Depth (in.): 20.5
  • Used With Equipment Type: Utility
  • Returnable: 90-Day
North Carolina
Winston-Salem
Handle for 24 In. Wide Aluminum Platform Truck
Prices start at : 27.17 USD / each

Compatible with 24” wide Magliner platform truck. The handle's bent looped shape proves user comfort and convenience. Magliner's removable platform truck handle is lightweight and designed for strength.
  •  Fits 24" wide Magliner aluminum platform truck
  •  Handles reaches 26-1/2 in. from the base of the platform
  • Fits Brands: Magliner
  • Returnable: 90-Day
  • Manufacturer Warranty: One year warranty from date of purchase against defects in workmanship or material.
  • Fits Models: All Magliner brand hand trucks
North Carolina
Winston-Salem
Carburetor
Prices start at : 80.37 USD / each

Briggs & Stratton carburetors allow your engine to receive the right amount of gas mixed with air so the engine runs properly. Your outdoor power equipment's carburetor is a mechanical pump that supplies a constant, steady flow of fuel to the engine.
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
  •  There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
  • Product Depth (in.): 5.5
  • Returnable: 90-Day
  • Product Width (in.): 2
  • Engine Part Type: Carburetor
North Carolina
Winston-Salem
Electric Pressure Washer Hardware Pack for SPX2000
Prices start at : 8.99 USD / each

The SPX2000-HP hardware pack contains everything you need to keep your gear in tip-top shape. Need a part Pick up your pack. It does not get much better than that. No more guessing whether you have the right part.
  •  Large head screws (2)
  •  Adjustable spray wand
  •  Small head screws (2)
  • Fits Brands: Sun Joe
  • Returnable: 90-Day
  • Product Width (in.): 0 in
North Carolina
Winston-Salem
Used 12 Groove Crankshaft Pulley For Cummins Isx
Prices start at : 75.00 USD

USED 12 GROOVE CRANKSHAFT PULLEY FOR CUMMINS ISX
  • Stock Number: 14171
  • Year: Unknown
North Carolina
Winston-Salem
25 HP Engine
Prices start at : 1473.3 USD / each

Indeed there is performance magic in the V-Twin engine. Despite their high power, like all Subaru engines, they boast maximum durability, easy starts and low exhaust emission. Delivering high power and performance in a small package, these four-cycle...
  • Returnable: 30-Day
  • Orientation: Horizontal
  • Brand/Model Compatibility: Subaru
  • Product Depth (in.): 12.5
  • Product Height (in.): 18.75
  • Certifications and Listings: No Certifications or Listings
North Carolina
Winston-Salem
Carburetor
Prices start at : 37.82 USD / each

Briggs & Stratton carburetors allow your engine to receive the right amount of gas mixed with air so the engine runs properly. Your outdoor power equipment's carburetor is a mechanical pump that supplies a constant, steady flow of fuel to the engine.
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
  • Returnable: 90-Day
  • Manufacturer Warranty: One year limited warranty
  • Product Height (in.): 3.25
  • Engine Part Type: Carburetor
North Carolina
Winston-Salem