Drip Irrigation Tools Accessories Drip Irrigation For Sale In San Diego

• ✓ For drip irrigation
• ✓ Total Satisfaction Policy
• ✓ Black

• Inlet Diameter (in.): 1
• Color Family: Blacks
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ Inside of the stake is ribbed and easily attached to water bottle or hose for watering
• ✓ Specially engineered cap is UV-protected and designed for hammering into the ground with a sledge hammer; 100% guaranteed not to break or crack while driving into the ground
• ✓ Deep watering promotes deeper roots and helps with weed control

• Material: ABS Plastic
• Product Width (in.): .75
• Irrigation System Component: Stakes

• ✓ Inlet and outlet thread: 3/4 in. FNPT x MNPT
• ✓ Maximum recommended flow rate: 12 GPM
• ✓ Pressure output range: preset to 30 psi, maximum working pressure range: 150 psi
• ✓ Flow rate from 0.5 to 12 GPM

• Minimum Regulated Pressure (psi): 25
• Maximum Gallons Per Minute: 12

• ✓ For outdoor use only
• ✓ For drip irrigation applications only
• ✓ Easy to install
• ✓ Black in color
• ✓ For cold water use only

• Drip Irrigation Fitting Type: Coupling

• 25 psi suggested operating pressure: Yes
• Manufacturer Warranty: 3 Year Warranty
• Fitting Type: Compression Fittings
• Pressure Rating: 60
• Drip Irrigation Fitting Type: Tee
• Product Length (in.): 2 in

• Product Width (in.): 1
• Keeps your tubing in place on the ground where you need it: Yes
• Returnable: 90-Day
• Irrigation System Component: Stakes
• Material: ABS Plastic
• Color Family: Blacks

• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Maximum incoming operating pressure: up to 100 psi
• ✓ Compact construction with non-corrosive plastic materials

• Fitting Type: Drip Adapters
• Product Height (in.): 10
• Material: ABS Plastic

• ✓ Bleed function allows you to flush any debris from system
• ✓ Compatible with any timer, faucet, and garden hose
• ✓ Backflow preventer keeps water from re-entering the main water supply and potential contamination

• Irrigation System Component: Kit
• Package Quantity: 29
• Manufacturer Warranty: 2 Years

• ✓ Exclusive combination design helps with any drip system set up and cuts down on the time it takes to complete the installation because everything is all in the same tool, no looking around for extra tools
• ✓ Unique handle is made for comfort and control while making cuts to your tubing

• Color Family: Greens
• Material: PVC
• Product Depth (in.): 1.13
• Product Width (in.): 1.5

• ✓ Quick Easy Fit push-together assembly speeds installation
• ✓ Quality construction
• ✓ Quick tips; dip ends of tubing in warm water for a minute to soften up before inserting into fitting, and twist fitting onto tubing while inserting if necessary

2.6

• Package Quantity: 1
• Product Width (in.): 2.6
• Product Height (in.): 2.6

• ✓ Made of high impact ABS
• ✓ Starter thread for smoother threading
• ✓ More comfortable handles
• ✓ Model number and size molded into saddle

• Product Depth (in.): 1.75
• Irrigation Tool Type: Pipe Saddle

• ✓ Provides 6 GPH flow rate from each outlet
• ✓ Can be used in conjunction with other sprinklers within the same zone

• Irrigation System Component: Kit
• Manufacturer Warranty: 3 Year Warranty
• Number of pieces included: 6
• Color Family: Blacks

• Product Depth (in.): 2.5
• Product Height (in.): 4.25
• Returnable: 90-Day
• Short thread design allows for the quickest and easiest installation possible: Yes
• Color Family: Multi
• Material: Polypropylene

• Fitting Type: Barb Fittings
• Inner Diameter (in.): .25
• Product Length (in.): 5
• Color Family: Blacks
• Product Height (in.): 6.5
• Contains UV inhibitors to protect against direct sun exposure: Yes

• ✓ Cut, connect and secure tubing and emitters to individual plants
• ✓ Helps facilitate a fast and convenient installation
• ✓ Non-threaded

• Package Quantity: 4
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Drip Irrigation Fitting Type: Tee

• ✓ To be used outdoors with cold water only
• ✓ For cold water use only
• ✓ Pre-assembled stake and sprinkler

• Manufacturer Warranty: None
• Product Height (in.): 13.0 in
• Material: Poly

0.75

• Regulates water pressure to 25 PSI - Reducing damage to drip watering system: Yes
• Returnable: 90-Day
• Inlet Diameter (in.): 0.75
• Manufacturer Warranty: None
• Irrigation System Component: Accessory
• Outlet Diameter (in.): 0.75

• ✓ 10 easy-to-clean misting nozzles
• ✓ Operating pressure: 40 to 80 PSI
• ✓ Attach to any outdoor faucet and turn the water on for the Ocean breeze evaporative mist cooling effect
• ✓ Operates at the pressure normally found in homes, without the need for expensive pumps, creating micro-sized water droplets to maximize the cooling effect
• ✓ Dramatically reduces air temperature in a localized area
• ✓ Completely non-toxic and safe for animals

• ✓ Total Satisfaction Policy
• ✓ Use with 1/2 in. or 5/8 in. drip irrigation tubing

• Product Height (in.): 3.5
• Pressure Rating: 40
• Returnable: 90-Day
• Package Quantity: 1

• ✓ Ergonomic grip and spring jaws put less strain on hands
• ✓ Blade is sharp, use with caution
• ✓ Heavy-duty aluminum and steel construction

• Material: Plastic
• Product Width (in.): 4.5 in
• Color Family: Reds / Pinks

• ✓ Built-in mini disk filter provides additional system protection and easy cleaning
• ✓ Features a removable nozzle for easy replacement and maintenance
• ✓ Provides 4 GPH flow rate from each outlet

• Package Quantity: 1
• Kit Type: Drip Riser Kits
• Irrigation System Component: Kit

• ✓ Large finger tabs for easy installation
• ✓ Durable and long lasting material

• Package Quantity: 25
• Returnable: 90-Day
• Product Depth (in.): 0.5
• Manufacturer Warranty: None

• ✓ Kit includes: 10 blue 0.5 GPH emitters, 10 black 1 GPH emitters, 10 red 2 GPH emitters, 10 tie-down stakes, 1 hole punch, 24 hose plugs, 1 end clamp and 1 hose adapter
• ✓ Self-flushing NGE emitters are pressure compensating for uniform flow, even on sloping landscapes
• ✓ 1 hole punch

• Irrigation System Component: Kit
• Package Quantity: 1
• Included: Stakes

0.5 in

• ✓ 5 in. length with small bend radius securely holds tubing in place
• ✓ Install wherever your tubing tries to lift up

• Material: Galvanized Steel
• Product Height (in.): 0.5 in
• Product Width (in.): 0.5 in
• Product Depth (in.): 5.0 in

• ✓ Includes 20 drippers at 1 GPH, 2 drippers at 2 GPH and 2 drippers at 4 GPH
• ✓ No special tools or glue are needed
• ✓ Saves money by significantly lowering the cost of system components compared to conventional irrigation systems

• Manufacturer Warranty: 3 Year Warranty
• Number of pieces included: 51
• Returnable: 90-Day

• ✓ For drip irrigation applications only
• ✓ Easy to use
• ✓ For cold water use only
• ✓ Heavy-duty plastic construction

• Irrigation System Component: Stakes
• Manufacturer Warranty: None

• ✓ Holds and supports any 1/4 in. micro tubing
• ✓ Pack of 100

• Irrigation System Component: Stakes
• Material: ABS Plastic
• Product Width (in.): .5 in
• Color Family: Blacks