Drip Irrigation Tools Accessories Drip Irrigation For Sale In San Antonio

Pro Punch is designed for a fast and easy way to punch holes in 1/2 in. Used for installing drippers or 1/4 in. Helps resists hand fatigue and saves time when installing multiple drippers.

This way, the spray achieves good water coverage. Polyflex Riser Stake helps you apply water like a spray head on an underground system. The stake holds spray devices above plants.

Just slide the stake over tubing and anchor in ground. Stakes (10-Pack) are used to position your 1/4 in. The Toro Blue Stripe 1/4 in. Irrigation drip tubing just about anywhere.

Available with an FPT, 90° elbow, or straight barb fitting. The patented cutting tip allows the installer to pierce through pipe quickly, while the ergonomic handle allows for comfort.

Universal SnapTap pipe saddles have a unique adjustable latch that allows them to fit around 3/4 in., 1 in. Only one saddle is required for a variety of pipe sizes and applications.

PVC irrigation piping. The Blazing Saddle Swing Pipe Barb is for use with 1 in. The easiest way to a secure fit without any tools. This saddle is ideal for both contractors and DIY.

FPT is for use with 1-1/4 in. Simply clamp, push down, twist, and you are done. This saddle is ideal for both contractors and DIY. The Blazing Saddle 1/2 in. The easiest way to a secure fit without any tools.

Polyethylene irrigation piping. The Blazing Saddle Swing Pipe Barb is for use with 1 in. The easiest way to a secure fit without any tools. This saddle is ideal for both contractors and DIY.

To be used outdoors with cold water only. Barb Assortment Pack contains four different barbed drip fittings. The Orbit 1/4 in. These fittings are made of durable plastic that will ensure many years of reliable use.

The stakes also allow you to aerate and fertilize the roots and soil of your trees and plants. Green King Watering Stakes are designed to efficiently and effectively water your trees, shrubs, and plants directly at the roots.

The main feature of the tool is tubing cutter that can easily punches hole in the drip tubing and then use the side of the toll to insert drippers or barbs fittings into the drip tubing or micro tubing.

Facilitates a fast, convenient installation. This non-threaded cutter prepares tubes for connection. This Tubing Cutter helps you size tubing to meet the unique needs of your sprinkler and irrigation system.

Polyethylene irrigation piping. The Blazing Saddle Swing Pipe Barb L is for use with 1 in. The easiest way to a secure fit without any tools. This saddle is ideal for both contractors and DIY.

The End Cap Stake allows you to conclude a distribution line. When you want to deliver water to your drip system via an above ground garden hose, these sturdy stakes are the ideal mount for a drip manifold.

Poly riser can be used to extend the micro sprayers, misters, or foggers above the plant canopy, providing a simple solution to a spray height layout within the plant growth area. Long semi-rigid poly riser with self-piercing fast threaded barb is used...

Flag drippers offer the posted flow rate with a line pressure of 25 psi. Twist open flag top can be removed for easy cleaning. The DIG 4 GPH Flag Drippers provide a reliable, point source irrigation solution for your drip system.

These emitters offer simple flow adjustment. In a full-circle pattern. The Toro Blue Stripe Drip Adjustable Emitters (5-Pack) provide a throw diameter of up to 3 ft.

It is ideal to flush your system each time you install or replace drippers. Compression End Cap. Flush your irrigation system quickly and easily with this 1/2 in. The end cap is used to periodically flush irrigation systems of dirt and other debris keeping...

It is fully adjustable from off to 2 GPM and a 0 to 2-ft. The Toro Flood Bubbler has a full circle pattern for slow, deep watering around trees, shrubs, and vegetable gardens. The Toro flood bubbler can be mounted on a 1/2-in.

Accommodates most all threaded emitters. Pipe Thread Adapter can help adapt your sprinkler risers into water-efficient low-volume irrigation systems. Connect the male pipe thread with semi-rigid riser into the FNPT and thread or insert the micro sprinkler,...

The Elgo Micro Sprinkler Kit is a pre-assembled micro-irrigation system that conveniently connects directly to your hose or faucet outlet. Perfect for germinating seeds, or watering flower beds and gardens, this micro sprinkler system is easily assembled...

Installed and removed easily without the need for glues or special tools. Poly tubing in your drip irrigation system. Securely close off the end of 1/2 in. Allows for easy flushing of your system to keep your emitters clog free.

Barbed ends for direct insertion into the side of 1/2 in. Medium-flow dripper for watering of garden and landscaping plants as well as larger containers. Tubing for positioning near individual plants.

It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on End Cap works with the most common sizes of 1/2 in.

Everything is included for an easy installation and requires no special tools or glues. The DIG 4-outlet drip manifold kit converts a 1/2 in sprinkler riser into a water conserving drip system.

The stakes are 1/4 in. Tubing Stakes (10-Pack) make quick and easy work of irrigation system installation. Designed for use with your sprinkler and irrigation system.

By applying water directly to the root zone of your plants, you eliminate wasteful overspray and improve plant health while using less water. Ideal for larger planting beds and gardens.