Drip Irrigation Tools Accessories Drip Irrigation For Sale In Lincoln

Stake plus 36 in. The riser accepts Rain Bird and other standard threaded drippers and micro sprays. Helps direct water flow exactly where you need it in a wide variety of planting areas.

DIG's pipe thread preset pressure regulators reduce and regulate the incoming pressure of the household's water entering a drip irrigation or micro sprinkler system to the appropriate operating pressure of 25 PSI.

Adds supplemental watering to individual plants. The stakes help conform tubing to your landscape with mulch. Galvanized Stakes (10-Pack) help secure tubing and emitters to individual plants.

This handy tool can do it all. The main feature of the tool is tubing cutter that can easily punches hole in the drip tubing and then use the side of the toll to insert drippers or barbs fittings into the drip tubing or micro tubing.

Finished connection is durable, leak-resistant and stays in place season after season. Drip irrigation tubing to 3/4 threaded faucet or garden hose. Outside diameter Drip irrigation tubing.

Made from durable, UV resistant materials for long life in the landscape. Ideal for repairing or expanding your drip irrigation system. Poly tubing and create a strong, water tight seal without the use of glues or special tools.

Provides a split direction from your drip head assembly. Compression fitting provides a secure, water tight fit without the use of glue. The DIG Hose Thread Swivel Tee is designed to attached your drip irrigation system to a hose thread outlet.

Supporting component hardware included. Roll of 8mm drip line. This customizable system features both sprinkler and dripline capabilities with water saving technology. Conserve water while keeping your plants happy and hydrated with the Elgo 2-in-1 Watering...

Made from durable, UV resistant materials for long life in the landscape. Ideal for repairing or expanding your drip irrigation system. Poly tubing and create a strong, water tight seal without the use of glues or special tools.

Long semi-rigid poly riser with self-piercing fast threaded barb is used in the installation of all micro sprayers, misters, or foggers with 10/32 threads. Poly riser can be used to extend the micro sprayers, misters, or foggers above the plant canopy,...

Distribution tubing. Tubing to your 1/2 in. Barbed fittings feature a double barb design for increased grip and durability. Orbit's 1/4 in. Use to adapt 1/4 in. The oversized finger tabs allow for easier installation.

Each connection offers raised barbed ends to ensure a strong, water tight fit. Micro tubing, soaker hose or drip-line. Barb Connector is used to provide a secure connection of two pieces of 1/4 in.

This reduces high pressure damage and drip system failure. For outdoor use with cold water only. The Orbit 25 psi Faucet Regulator keeps water pressure to 25 psi.

Riser fits perfectly within a garden or flowerbed. The decorative design of the Orbit 12 in. Lightly spray water over surrounding flowers by extending the riser to a 20 in. Sprinkler Stake with 12 in.

Comes with everything you need to set up your drip watering system. It is ideal for all landscape, perennial and garden areas and creates excellent growth and plant health with little water.

Drip irrigation tubing or use in-line with 1/4 in. Non-pressure compensating. Tubing for positioning near individual plants. Barbed ends for direct insertion into the side of 1/2 in.

Poly tube from kinking when a sharp 90 degree bend is necessary. The C36 compression elbow is used to prevent the 1/2 in. (.700 OD) poly tubing without glue or tools, using a simple wrist action to push the polyethylene drip tubing into the compression...

Removing debris from the water supply minimizes clogging in drippers and spray nozzles. The mesh filter is easy to remove for cleaning. This filter is designed specifically for drip watering systems.

These emitters feature a full-circle pattern and an adjustable throw distance measuring up to 3 ft. Toro Blue Stripe Drip Emitters (5-Pack) incorporate a flow and adjustment system that fine-tunes the flow of water from a gentle stream to a slow drip...

Used for installing drippers or 1/4 in. Helps resists hand fatigue and saves time when installing multiple drippers. Pro Punch is designed for a fast and easy way to punch holes in 1/2 in.

You can see the collected sediment through the clear cover to determine when the filter needs to be cleaned. The screw-on flush valve allows you to purge any sediment from the filter cartridge and reuse the filter

They have 2 openings. The elbows help you connect hoses in your sprinkler and irrigation system. These Easy Fit Elbows (2-Pack) are non-threaded.

Fittings, PC drippers, stakes, and 250 ft. The DB250 Drip Irrigation Maintenance and Repair Expansion Bucket is a fully loaded 162 piece kit that is used to repair, expand, or maintain your drip irrigation system.

We do not recommend extending 1/4 in. Drip tubing, or you can extend the drippers into the plants with 1/4 in. The drippers can be installed by punching a hole into the 1/2 in. Chemical and clog resistant, the drippers are an economical choice for systems...

The PC-CV-06 0.58 GPH pressure compensating drip emitter's self-activated flushing. Non-draining mechanism provides excellent clog resistance, stops water spill when the system is shutting off, and overall saves water for a very efficient irrigation system.

Rain Bird Micro Bubblers provide adjustable, low-volume watering up to a 3 ft. Ideal for shrub plantings, trees, containers and flower beds.

These 180° Threaded Microsprays (2-Pack) apply water like a spray head on an underground system. The microsprays are ideal for mass plantings, ground cover, annual flower beds and containers.