Drip Irrigation Systems And Kits Irrigation Supplies Equipment For Sale In Pasadena

Specs

• 1.25 mm dia.: Specs
• Space the nozzles every 3ft and the waterlines 6ft apart.: Specs
• Red/white nozzle: Specs
• Volume rated at .27gpm at 36psi and .35gpm at 73psi.: Specs

Specs

• Rate: 1 gpm
• Ideal Hose Length: 100 feet
• Recommended rate is 1 gpm per 100 feet of soaker hose: Specs
• 1/2in. FPT x 3/4in. female hose adaptor: Specs

Product Features

• Run-Out Valves require at least 15 PSI to work properly.: Product Features
• When the water is turned off, the Run-Out Valve will open and allow water to run out of the line, eliminating drip from all overhead nozzles.: Product Features
• Follow the PVC cement directions regarding pipe preparation and drying times.: Product Features
• Use PVC cement and a 1" to 3/4" PVC reducer bushing to connect Run-Out Valves to 3/4" PVC.: Product Features

• ✓ 2 outlets per each drip emitter helps to prevents clogging
• ✓ Kit has all the parts needed to cover up to 10 vegetables rows totaling 50ft long
• ✓ Includes 1/4 in. drip-line and tubing with built-in drippers
• ✓ Includes 25 PSI pre-set pressure regulator

• Included: Backflow Preventer,Pressure Regulator,Stakes,Tubing,Tubing Clips
• Package Quantity: 1

• ✓ No special tools or glue are needed; save money by significantly lowering the cost of system components
• ✓ Drip irrigation maintenance and repair expansion bucket features DIG's versatile, color-coded, pressure-compensating drippers in 3 flow rates (1, 2, and 4 GPH) to efficiently repair, add to, or modify your exiting drip system; the kit is economically priced well below the cost of the individual parts combined
• ✓ Maximum recommended flow using the 1/4 in. distribution, tubing: 12 GPH premium micro tubing (poly), length: 250 ft. with 0.170 I.D. x 0.250 O.D. PC drip emitter flow rates and color code: 1 GPH (4 LPH) color code - black 2 GPH (8 LPH) color code - green

• Kit Type: Drip Irrigation Kit
• Returnable: 90-Day
• Number of pieces included: 162

Specs

Product Features

• Manufactured with more than 80% recycled materials: Specs
• Leak rate: 0.58 gallons per foot, per hour at 30psi: Specs
• Install above or below ground.: Product Features
• Cut to length or repair your soaker hose using our 50M58, CR58M, AND CR58F couplers.: Product Features
• Standard brass garden hose couplers included: Specs
• Outer diameter: 1-inch: Specs

Specs

• 100 per bag: Specs
• To connect 1/4" tubing to 1/4" tubing: Specs

• ✓ No special tools or glue needed for installation
• ✓ Operates at very low flow from less than 1 gallon per minute up to 12 gallons per minute
• ✓ Used to automate a drip zone
• ✓ All-purpose complete unit includes a 3/4", 24VAC in-line valve, 3/4” heavy duty filter with a 155-mesh screen, 25 PSI preset pressure regulator and 3/4” FHT swivel adapter with .700 OD
• ✓ Operating pressure: 10 to 100 PSI
• ✓ Made from high quality, UV resistant materials

• ✓ Converts all pop-up sprinklers with a 1/2 in. threaded bottom inlet
• ✓ Connects to all brands of 1/2 in. drip tubing
• ✓ Converts underground sprinklers and risers to water-saving drip irrigation

• Kit Type: Drip Riser Kits
• Package Quantity: 3
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ Use with 1/2 in. drip tubing and 1/4 in. barbs fittings including 25 psi pressure regulator
• ✓ Includes 50 ft. of 1/4 in. drip-line with .65 GPH flow rate from each dripper spaced at 9 in. intervals
• ✓ Made from high quality, UV resistant materials

• Kit Type: Drip Riser Kits
• Manufacturer Warranty: 3 Year Warranty
• Color Family: Blacks

• ✓ Includes 20 drippers at 1 GPH, 2 drippers at 2 GPH and 2 drippers at 4 GPH
• ✓ Includes everything required for installation- no gluing needed
• ✓ Included drippers are pressure compensating (PC) providing consistent, uniform flow
• ✓ Saves water by delivering water right where it is needed most, at the plant root zone

• Included: Backflow Preventer,Pressure Regulator,Stakes,Tubing,Tubing Clips
• Manufacturer Warranty: 3 Year Warranty

• Number of pieces included: 11
• Manufacturer Warranty: 2 year limited
• Returnable: 90-Day
• 2 simple steps are needed to install this kit: step 1 - connect to water source, step 2 - lay out the supply tubing - no need to add drippers or connectors because they are already pre-installed in the dripper line: Yes
• Color Family: Browns / Tans
• Included: Garden Hose Connection,Stakes,Tubing

• Acts as an end cap for low-pressure irrigation tubing applications: Product Features
• Compression Fittings: Measure slightly smaller than 5/8" to connect to outside of 5/8" poly tubing for low-pressure operation: Specs

• ✓ No special tools or glue are needed
• ✓ Can be automatically controlled with one of DIGs timers
• ✓ Saves money by significantly lowering the cost of system components compared to conventional irrigation systems
• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)

• Manufacturer Warranty: 3 Years
• Number of pieces included: 47

• Included: Stakes,Tubing
• Can be used with 1/4 in. drip-line, DIG model SH50: Yes
• Number of pieces included: 47
• Irrigation System Component: Kit
• Manufacturer Warranty: 3 Year Warranty
• Color Family: Blacks

• ✓ Bleed function allows you to flush any debris from system
• ✓ Backflow preventer keeps water from re-entering the main water supply and potential contamination
• ✓ Compatible with any timer, faucet, and garden hose

• Kit Type: Drip Irrigation Kit
• Package Quantity: 1
• Irrigation System Component: Kit

• ✓ Kit has everything you need to get started with drip irrigation and stop watering your plants by hand
• ✓ Our patented clamp-N-pierce connector on all of the assembled feeder lines means there are no tools required - a simple push and it connects, pierces the tubing and is "drip ready"
• ✓ Kit includes: 50 ft. of 1/2 in. pre-assembled hose, a filter/regulator combo, timer, "Y" valve, 5 wire stakes, 10 hole plugs, an end plug, a universal "T", 10 pre-assembled 2 GPH feeder lines, 10 plastic stakes

• Manufacturer Warranty: 2 YEAR LIMITED
• Irrigation System Component: Kit
• Returnable: 90-Day

• ✓ 20, 1 GPH pressure-compensating button drip emitters
• ✓ A discreet way to water your plants automatically
• ✓ Provides flexibility in irrigation frequency and low application rate minimizes soil compaction and surface runoff
• ✓ Feel good about not wasting water

• Manufacturer Warranty: 3 Year Warranty
• Included: Backflow Preventer,Pressure Regulator,Tubing,Tubing Clips

• ✓ Slips easily into pipe without the need for tools, clamps, or extra fittings
• ✓ Burst pressure exceeds 400 PSI; however, this product is not intended to be used on main lines or under constant pressure

• Material: Acrylonitrile Butadiene Styrene (ABS)
• Product Height (in.): 1
• Returnable: 90-Day
• Connection: Female Pipe Thread

• ✓ No glue or special tools required for installation
• ✓ 1/2 in. FPT x 3/4 in. MHT

• Product Height (in.): 2.125
• Manufacturer Warranty: 3 Year Warranty
• Returnable: 90-Day
• Color Family: Blacks

• ✓ Bleed function allows you to flush any debris from system
• ✓ System can water 5 to 6 planters depending on size and spans 24 ft.
• ✓ Complete kit perfect for watering potted plants, hanging baskets and vegetable gardens
• ✓ System can be connected to additional drip kits to cover larger areas
• ✓ Backflow preventer keeps water from re-entering the main water supply and potential contamination

• Package Quantity: 41

• ✓ Recommended filtration is 150 to 155 mesh
• ✓ High-quality materials ensure a long life

• Dripper Type: Button
• Irrigation System Component: Drip Irrigation Emitter
• Product Depth (in.): 0.75
• Maximum Gallons Per Minute: .008