Agiseek home

Drip Irrigation Systems And Kits Horticulture Supplies For Sale In St Louis

Become a Partner
Dramm Irrigation Nozzle Assembly Insert
Prices start at : 0.71 USD / each

The assembly insert fits directly into PVC (schedule 40), aluminum or galvanized pipe w/o glue. Use for simple, glue free installation of Misty Mist nozzles! Assembly inserts for easy installation of nozzles.
Missouri
St. Louis
Dramm Irrigation Slip Fit Pipe Nipple for 1/2-inch Straight Pipe Riser Installation
Prices start at : 1.79 USD / each

Used to attach Misty Mist Nozzles directly to straight PVC pipe risers! Slip Fit Pipe Nipple for 1/2-inch straight pipe risers.
Missouri
St. Louis
Soaker Hose Drip Irrigation Tree Ring
★★★★★
Prices start at : 8.99 USD / each

Provides moisture direct to the roots where they need it most while reducing water usage up to 70%. Installs above or below ground, or cover with mulch to make it practically invisible.

Specs

    • Six foot piece of soaker hose with female couplers on each end, one "y" connector: Specs
    • When coiled in only one loop, the diameter of the coil is about 25": Specs
    Missouri
    St. Louis
    Maxijet Irrigation 5/8in Tubing Fitting: Figure 8 End Clamp
    Prices start at : 0.49 USD / each

    Figure 8 End Fitting
    Missouri
    St. Louis
    Hose Compression Fitting Male Hose Thread With Cap For Use With 5/8\
    Prices start at : 1.89 USD / each

    NOTE: Does not fit our 5/8" soaker hose. Acts as an end cap for low-pressure irrigation tubing applications! Compression x male hose thread fitting with cap for 5/8" poly tubing. Use item number BBFP50
    • Compression Fittings: Measure slightly smaller than 5/8" to connect to outside of 5/8" poly tubing for low-pressure operation: Specs
    • Acts as an end cap for low-pressure irrigation tubing applications: Product Features
    Missouri
    St. Louis
    Hose Compression Fitting Female Hose Thread For Use With 5/8\
    Prices start at : 4.09 USD / each

    NOTE: Does not fit our 5/8" soaker hose. Allows an easy way to connect poly distribution tubing to a standard garden hose or spigot! Compression x Female Garden Hose Thread for 5/8" poly tubing.
    • NOTE: Does not fit our 5/8" soaker hose. Use item number CR58F: Product Features
    • Compression Fittings: Measure slightly smaller than 5/8" to connect over outside of 5/8" poly tubing for low-pressure operation: Specs
    Missouri
    St. Louis
    Maxijet Micro Distribution Irrigation Tubing Shutoff, Barb x Barb
    Prices start at : 0.55 USD / each

    .160 Barb x .160 Barb Shut off barb for vinyl supply tube! Allows you to control the size of the spray pattern or to shut the water flow off all together.
    Missouri
    St. Louis
    Toro Micro Distribution Irrigation Tee Fitting 4mm BARB X BARB x BARB 100/BAG
    Prices start at : 7.99 USD / each

    Toro's micro distribution tubing is constructed of LDPE, and designed to distribute water to precise locations. Use to connect 1/4" tubing to 1/4" tubing. It can be used with barb fittings such as this "T" to move water to a drip emitter or slipped over...

    Specs

      • Male barb x barb fittings: Specs
      • To connect 1/4" tubing to 1/4" tubing: Specs
      Missouri
      St. Louis
      5/8\
      Prices start at : 4.15 USD / 1 Unit

      For use only with the 2,000' kit.http://www.johnnyseeds.com/tools-supplies/watering-and-irrigation/drip-irrigation-systems/5-8%22-perma-loc-x-barb-valve-irri-gator-accessory-7039.0.htmlIf anything you purchase from us proves unsatisfactory, we will either...
      Missouri
      St. Louis
      Head Wrench for Irrigation
      ★★★★★
      Prices start at : 78.79 USD / each

      The Head Wrench is drop forged, precision machined and made in the USA. A specialty tool for irrigation professionals! The Head Wrench perfectly fits all brands of spray heads, all rotor heads and Jar-Top valves up to 4 in diameter.

      Product Features

        • Dig less: Product Features
        • Angled jaw for easier access & precise grip: Product Features
        • Engineered specifically for rotor & spray heads: Product Features
        • Fits Jar-Top valves: Product Features
        Missouri
        St. Louis
        Irri-Gator Kit – 2000\'
        Prices start at : 323.00 USD / 1 Unit

        This system includes two 1,000', 5/8" diam. Maximum working pressure of 15 PSI is recommended. Roll rigid polyethylene tubing (no holes); 1 hose swivel; 1 filter; 1 pressure regulator; 1 adapter; 2 clamps; 1 punch tool; 20 perma-loc x barb fittings; 1...
        Missouri
        St. Louis
        Barb Fitting Elbow For 5/8-in Poly Tube & Soaker Hose and 1-in Osmile Hose
        Prices start at : 2.29 USD / each

        Makes installing 90-degree bends in our soaker hose and Blue-Stripe tubing easy! 1/2" barb x barb elbow for irrigation tubing and soaker hose.

        Specs

          • Outside barb measures slightly larger than 5/8" to connect to inside of 5/8" soaker, 1" Osmile, and 5/8" poly tubing: Specs
          • 1/2" inner diameter barb fittings: Specs
          Missouri
          St. Louis
          Toro Irrigation 5/8in Tubing Blue Stripe, No Emitters
          ★★★★★
          Prices start at : 22.99 USD / each

          We offer Lock-Eze fittings for easy connection. Standard barb/clamp fittings can also be used. See "LINKS' below for helpful instructions on setting up drip irrigation. Manufactured from premium grade linear low-density polyethylene resins, for tough...
          • Length: 100ft.
          • Ship wt: 5 lbs.
          Missouri
          St. Louis
          Elbow Fitting - Irri-Gator Accessory
          Prices start at : 3.23 USD / 1 Unit

          Http://www.johnnyseeds.com/tools-supplies/watering-and-irrigation/drip-irrigation-systems/elbow-fitting-irri-gator-accessory-9010.0.htmlIf anything you purchase from us proves unsatisfactory, we will either replace the item or refund the purchase price.
          Missouri
          St. Louis
          Maxijet Irrigation Ag Stake Assembly, 12ft diameter spray max
          ★★★★★
          Prices start at : 1.79 USD / each

          Durable one-piece jet with a winged one-arm design and quick locking threads to get the jet in and out of the stake in 1-2 turns. For today's high density plantings, the MAX-14 fill-in jet delivers a uniform filled-in pattern with maximum efficiency.
          Missouri
          St. Louis
          Regulator/Screen Filter - Irri-Gator Accessory
          Prices start at : 15.32 USD / 1 Unit

          Http://www.johnnyseeds.com/tools-supplies/watering-and-irrigation/drip-irrigation-systems/regulator-screen-filter-irri-gator-accessory-9017.0.htmlIf anything you purchase from us proves unsatisfactory, we will either replace the item or refund the purchase...
          Missouri
          St. Louis
          Irri-Gator Kit – 100\'
          Prices start at : 49.00 USD / 1 Unit

          Maximum working pressure of 15 PSI is recommended. Irrigate up to four 20' garden rows, spaced up to 5' apart. Specific charges will be displayed during checkout.If anything you purchase from us proves unsatisfactory, we will either replace the item or...
          Missouri
          St. Louis
          Irrigation Misty Mist Nozzle 1.0mm Diameter Blue/White
          Prices start at : 1.99 USD / each

          Blue/white nozzle. Great for bedding plants, azaleas, foliage plants, or poinsettias! Misty-mist nozzles are used for overhead mist propagation, raising humidity levels or for mist cooling.

          Specs

            • The nozzles produce a 6ft spray pattern when the water pipeline is 5ft above the crop.: Specs
            • 1.00 mm dia.: Specs
            • Mist action: Specs
            • Space the nozzles every 3ft and the waterlines 6ft apart.: Specs
            Missouri
            St. Louis
            5/8\
            Prices start at : 3.54 USD / 1 Unit

            Http://www.johnnyseeds.com/tools-supplies/watering-and-irrigation/drip-irrigation-systems/5-8%22-perma-loc-tee-fitting-irri-gator-accessory-9006.0.htmlIf anything you purchase from us proves unsatisfactory, we will either replace the item or refund the...
            Missouri
            St. Louis
            Extra 5/8\
            Prices start at : 13.27 USD / 1 Unit

            Expands any 1,000' Irri-Gator Kit or smaller to irrigate up to 3 more rows.http://www.johnnyseeds.com/tools-supplies/watering-and-irrigation/drip-irrigation-systems/extra-5-8%22-fitting-pack-irri-gator-accessory-9655.0.htmlIf anything you purchase from...
            Missouri
            St. Louis
            Barb Fitting Tee For 5/8-in Poly Tube & Soaker Hose and 1-in Osmile Hose
            Prices start at : 2.99 USD / each

            Makes tee-ing our soaker hose and Blue-Stripe tubing easy! 1/2" barb x barb tee for irrigation tubing and soaker hose.
            • Outside barb measures slightly larger than 5/8" to connect to inside of 5/8" soaker, 1" Osmile, and 5/8" poly tubing: Specs
            • Makes tee-ing our soaker hose and Blue-Stripe tubing easy; simply insert the barb into the hose or tubing. No locking ring clamp or gear clamp needed: Product Benefits
            Missouri
            St. Louis
            Drip Irrigation Hole Punch Tool For 5/8in to 1 1/4in Tubing
            Prices start at : 24.99 USD / each

            Adjustable for use with 16mm to 32mm (5/8"to 1 1/4") tubing. An extremely functional tool for spray stake and drip emitter installation! Easy to use. Includes 3 mm punch blade, other blades sold separately.

            Specs

              Product Features

                • An extremely functional tool for spray stake and drip emitter installation: Product Features
                • Allows a precise hole to be punched in poly tubing such as Toro Blue Stripe without slipping or driving through to the other side: Product Benefits
                • Approx 9 and 3/8" long: Specs
                • Poly construction with metal punch: Specs
                • Can be adjusted to fit 32, 25, 20 and 16 mm poly tubing with the turn of a knob: Product Features
                Missouri
                St. Louis
                Irri-Gator Kit – 250\'
                Prices start at : 94.00 USD / 1 Unit

                Maximum working pressure of 15 PSI is recommended. Irrigate up to six 35' garden rows, spaced up to 5' apart. Specific charges will be displayed during checkout.If anything you purchase from us proves unsatisfactory, we will either replace the item or...
                Missouri
                St. Louis
                Pro Series 5/8-inch Soaker Hose, 200 ft Runs
                Prices start at : 23.99 USD / each

                Slow, even watering without runoff or evaporation. A great all-around hose. The Pro Series is kink and crush resistant and will not freeze. Target Flow 4.65 Gal/Min per 50' based on a 10Gal/Min 40PSI Source

                Specs

                  • Cut to length or repair your soaker hose using our 50M58, CR58M, AND CR58F couplers: Specs
                  • 1/2" inner diameter: Specs
                  • Produced from 100% recycled rubber: Product Features
                  Missouri
                  St. Louis
                  Motorcraft Kh786 Hose-Htr Water
                  Prices start at : 13.74 USD / each

                  Motorcraft hoses are made to match their original counterparts in terms of fit, quality and durability. Motorcraft Kh786 Hose-Htr Water: The Motorcraft KH786 Water Heater Hose allows you to save money on car repairs by doing them yourself from the comfort...
                  • ✓ Check that this part is compatible with your vehicle
                  • ✓ Resists heat, oil, grease, antifreeze and all approved coolant additives
                  • ✓ Direct OEM replacement water heater accessory
                  • ✓ Made with ethylene-propylene diolefin monomer (EPDM) rubber
                  • Model: MTCKH786
                  Missouri
                  St. Louis
                  Motorcraft KH384 Hose-Htr Water
                  Prices start at : 50.49 USD / each

                  It provides optimal resistance to strong chemicals and the outdoor elements, including the effects of coolant and ozone. This durable water-heater accessory is designed with three separate hose ends that are color-coded in green, red and white bands.
                  • ✓ Weight: 11.5 oz
                  • ✓ Delivers reliable performance under harsh conditions
                  • Assembled Product Dimensions (L x W x H): 16.50 x 12.00 x 1.50 Inches
                  • Manufacturer Part Number: KH384
                  • Vehicle Type: Light Truck
                  • Model: MTCKH384
                  Missouri
                  St. Louis
                  Hunter FPT Rotator MP 3000 90-210 Degrees -MP300090
                  Prices start at : 10.37 USD / each

                  Pair with the Pro-Spray PRS40 to achieve optimal pressure regulation at the head of 40 PSI. MP ROTATOR PERFORMANCE DATA Arc Pressure PSI 90 25 30 35 40 45 50 55 180 25 30 35 40 45 50 55 210 25 30 35 40 45 50 55 270 25 30 35 40 45 50 55 360 25 30 35 40...
                  • Manufacturer Part Number: MP300090
                  • Brand: Drip Depot
                  Missouri
                  St. Louis
                  Agricultural market place, farms, farmers, land