Drip Irrigation Systems And Kits Farm Supplies For Sale In Palmdale

Specs

• To connect 1/4" tubing to 1/4" tubing: Specs
• 100 per bag: Specs

• Ship wt: 4 lb
• Rate: 0.5 gph flow rate

• Clearance: 2- inch clearance

Specs

• Complete with a top that can do 320 degree full fan, 165 degree half and 180 degree half circle patterns: Specs
• 12" green landscape stake with 27" green flexible vinyl supply tube: Specs

Specs

Product Features

• Can be cut to shorter lengths, or install "T"s or 90-degree elbows for sharp corners: Product Features
• Pre-set gallon-per-hour rates (.53 or 1.0): Specs
• 12" spacing on emitters: Specs
• Brown poly tubing: Product Features
• Pressure Compensating Drip Emitter tube comes in either 100' or 500': Specs
• Built-in pre-spaced pressure compensating emitters operate at consistent flow rat: Specs

• Compression Fittings: Measure slightly smaller than 5/8" to connect to outside of 5/8" poly tubing for low-pressure operation: Specs
• Acts as an end cap for low-pressure irrigation tubing applications: Product Features

Specs

• 1.00 mm dia.: Specs
• The nozzles produce a 6ft spray pattern when the water pipeline is 5ft above the crop.: Specs
• Mist action: Specs
• Blue/white nozzle: Specs

• Pattern: Adj. circle

• NOTE: Does not fit our 5/8" soaker hose. Use item number BBFE50: Product Features
• Compression Fittings: Measure slightly smaller than 5/8" to connect to outside of 5/8" poly tubing for low-pressure operation: Specs

Specs

• Outside barb measures slightly larger than 5/8" to connect to inside of 5/8" soaker, 1" Osmile, and 5/8" poly tubing: Specs
• 1/2" inner diameter barb fittings: Specs

Specs

• When coiled in only one loop, the diameter of the coil is about 25": Specs
• Six foot piece of soaker hose with female couplers on each end, one "y" connector: Specs

• Description: Micro Tubing 4mm x 100 ft coil
• Length: 100ft

Product Features

• Run-Out Valves are designed to be installed at the end of 1" or 3/4" PVC pipelines.: Product Features
• When the water is turned off, the Run-Out Valve will open and allow water to run out of the line, eliminating drip from all overhead nozzles.: Product Features
• Run-Out Valves require at least 15 PSI to work properly.: Product Features
• Follow the PVC cement directions regarding pipe preparation and drying times.: Product Features

• ✓ Ideal for keeping leftovers
• ✓ Convenient, compact plastic case has sections holding the parts needed to repair, change, or expand installation
• ✓ Includes each type of 1/4 in fittings, hole plugs, mini in-line drippers, hose end clamps, special hole punch, mounting clamps, filter washer, PC drippers and 1/4 in stakes

• Model: R558DT
• Brand: Raindrip

• ✓ Use our all-in-one tool (mla-tool) to make installation of these 1/4-in couplers even easier
• ✓ Made in the USA
• ✓ Also use the 1/4-in couplers to make repairs to cuts in the 1/4-in vinyl or 1/4-in in-line drip Tubing

• Features: a161cpub - sold as 6 units
• Brand: Raindrip
• Count: 1
• Model: A161CPUB
• Assembled Product Dimensions (L x W x H): 14.50 x 2.00 x 0.75 Inches

• Manufacturer Part Number: 17H
• Brand: Drip Depot

• Brand: Orbit DripMaster