Drip Irrigation Systems And Kits Farm Supplies For Sale In Hayward

Specs

• Directs spray toward plant, reducing undesired overspray.: Specs
• Arrow sets proper height of stake in pot.: Specs
• Arrow acts as an edge of pot locator.: Specs

Specs

• Volume rated at .27gpm at 36psi and .35gpm at 73psi.: Specs
• Space the nozzles every 3ft and the waterlines 6ft apart.: Specs
• Mist action: Specs
• The nozzles produce a 6ft spray pattern when the water pipeline is 5ft above the crop.: Specs

• A convenient way to make 90-degree bends with 5/8" poly pipe when using low-pressure applications: Product Features
• Compression Fittings: Measure slightly smaller than 5/8" to connect to outside of 5/8" poly tubing for low-pressure operation: Specs

Product Features

• Run-Out Valves are designed to be installed at the end of 1" or 3/4" PVC pipelines.: Product Features
• When the water is turned off, the Run-Out Valve will open and allow water to run out of the line, eliminating drip from all overhead nozzles.: Product Features
• Follow the PVC cement directions regarding pipe preparation and drying times.: Product Features
• Use PVC cement and a 1" to 3/4" PVC reducer bushing to connect Run-Out Valves to 3/4" PVC.: Product Features

Specs

Product Features

• Garden hose couplers: Specs
• Rolls up flat and tight unlike round soaker hose; easier to store and transport: Product Features
• According to manufacturer, runs longer than 75 feet result in uneven coverage: Specs
• Waters just like a traditional soaker hose, saving water: Product Features

Product Features

• Size: 2mm
• Allows a precise hole to be punched in poly tubing such as Toro Blue Stripe without slipping or driving through to the other side: Product Benefits
• Poly construction with metal punch: Specs
• An extremely functional tool for spray stake and drip emitter installation: Product Features
• Can be adjusted to fit 32, 25, 20 and 16 mm poly tubing with the turn of a knob: Product Features
• Comes with a punch that matches the width of the blade.: Product Features

• Makes installing end-plugs in our soaker hose and Blue-Stripe tubing easy; simply insert the barb into the hose or tubing. No lock-ring or gear clamp needed: Product Benefits
• Outside barb measures slightly larger than 5/8" to connect to inside of 5/8" soaker, 1" Osmile, and 5/8" poly tubing: Specs

• 3/4" x 7" overall: Specs

• Length: 100ft
• Description: Micro Tubing 4mm x 100 ft coil

• Makes installing 90-degree bends in our soaker hose and Blue-Stripe tubing easy; simply insert the barb into the hose or tubing. No locking ring clamp clamp or gear clamp needed: Product Benefits
• 1/2" inner diameter barb fittings: Specs

Specs

• Ideal Hose Length: 100 feet
• 1/2in. MPT x 3/4in. male hose adaptor: Specs
• 1/2in. FPT x 3/4in. female hose adaptor: Specs
• 1/2in. MPT inlet x 1/2in. FPT outlet flow regulator, 5-90 psi: Specs

Specs

• Inner diameter: approximately 9/16-inch: Specs
• Length: 100 ft
• Made in the USA: Specs
• Standard brass garden hose couplers included: Specs
• Cut to length or repair your soaker hose using our 50M58, CR58M, AND CR58F couplers.: Product Features
• Available in 100-foot or 250-foot length: Specs

• Clearance: 2- inch clearance

• Adjusts with a flathead screwdriver: Specs
• Stainless steel: Product Features
• This is a handy clamp for securing hoses to barbed fittings, such as a soaker hose application or fitting a sprayer hose to a barbed male fitting on a spray gun or wand: Product Benefits

• ✓ 10 count
• ✓ For outdoor use with cold water only

• Count: 1
• Color: Multicolor
• Assembled Product Dimensions (L x W x H): 0.53 x 5.50 x 5.75 Inches
• Manufacturer Part Number: 65730

• ✓ Flow rate: 0.64 to 5.3 GPM
• ✓ Operating pressure range: 20 to 100 PSI
• ✓ 40 - 360 degree arc setting
• ✓ Recommended pressure range: 30 to 50 PSI

• Brand: Drip Depot
• Manufacturer Part Number: PGJ00

• ✓ Punch a hole into mainline tubing using any of our 1/4" punches.
• ✓ Then, plug the open end of the drip line with a goof plug.

• Color: Black
• Brand: Drip Depot