Drip Irrigation Fittings Drip Irrigation For Sale In Huntsville

★★★★★

Prices start at : 2.56 USD / package

Distribution (or soaker) tubing. For outdoor use and cold water only. Used to connect all brands of 1/4 in. Double barb design adds additional holding power. Distribution or soaker tubing.

✓ For drip irrigation applications only
✓ For use with 1/4 in. distribution or soaker tubing
✓ Black in color

Manufacturer Warranty: 1
Material: Poly
Pressure Rating: 80

Ontario

Huntsville

1/2 in. In-Line Shut-Off Valve

★★★★★

Prices start at : 3.12 USD / each

Installs easily with barbed inlet and outlet, providing a water tight seal without the use of glue. Turn valve 90° to stop the flow of water. The DIG 1/2 in. In-Line Shut-Off Valve is to allow full control to turn on or off the flow of 1/2 in.

Product Length (in.): 0.5
Conveniently control specific sections within your drip system: Yes
Material: ABS Plastic
Color Family: Blacks
Pressure Rating: 60
Outer Diameter (in.): .50

Ontario

Huntsville

Drip 1/2 in. Barbed On/Off Valve

★★★★★

Prices start at : 4.3 USD / each

Barbed ends permit easy, leak-free insertion into drip tubing. Easily adjust or shut off flow in 1/2 in. Top cap turns to adjust flow. Avoid over- or under-watering of plants with different moisture needs in the zone.

Avoid over- or under-watering of plants with different moisture needs: Yes
Material: Plastic
Product Width (in.): 1
Drip Irrigation Fitting Type: Valve
Returnable: 90-Day
Inner Diameter (in.): .63

Ontario

Huntsville

1/2 in. 0.700 O.D. Compression Coupling

★★★★★

Prices start at : 0.92 USD / each

Made from durable, UV resistant materials for long life in the landscape. Ideal for repairing or expanding your drip irrigation system. Poly tubing and create a strong, water tight seal without the use of glues or special tools.

Product Height (in.): 3.25
Manufacturer Warranty: 3 Years
No special tools or glues needed: Yes
Material: ABS Plastic
Product Width (in.): 1
Pressure Rating: 60

Ontario

Huntsville

1/2 in. Pipe Thread Adapter with Riser

Prices start at : 1.28 USD / each

Accommodates most all threaded emitters. Connect the male pipe thread with semi-rigid riser into the FNPT and thread or insert the micro sprinkler, micro sprayer or drip emitter into the top of the PE riser.

✓ Easy to install
✓ Durable 8 in. riser

Product Height (in.): 8.25
Connection: Male Pipe Thread
Returnable: 90-Day
Pressure Rating: 25

Ontario

Huntsville

1/4 in. Barb Tees (50-Pack)

★★★★★

Prices start at : 4.97 USD / each

Each connection offers raised barbed ends to ensure a strong, water tight fit. Micro tubing, soaker hose or drip-line. Barbed Tee is used to provide a secure connection of three pieces of 1/4 in.

✓ No special tools or glue needed
✓ Inserts easily into 1/2 in. poly tubing and 1/4 in. micro tubing for a watertight fit

Connection: Barb x Barb x Barb
Drip Irrigation Fitting Type: Tee
Product Length (in.): 4
Fitting Type: Barb Fittings

Ontario

Huntsville

3/4 in. MPT x 1/2 in. Drip-Lock Push-Fit

★★★★★

Prices start at : 0.98 USD / each

It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on Coupling works with the most common sizes of 1/2 in.

✓ For outdoor use with cold water only
✓ Convenient installation and maintenance
✓ For irrigation applications only
✓ 1/2 in. fitting

Drip Irrigation Fitting Type: Coupling
Inner Diameter (in.): 0.5

Ontario

Huntsville

1/4 in. Barb Tees (100-Pack)

★★★★★

Prices start at : 9.99 USD / each

Each connection offers raised barbed ends to ensure a strong, water tight fit. Micro tubing, soaker hose or drip-line. Barbed Tee is used to provide a secure connection of three pieces of 1/4 in.

Product Length (in.): .25 in
Outer Diameter (in.): 0.25
Product Height (in.): .6
Returnable: 90-Day
Product Width (in.): .4 in
Made from durable, high-quality material: Yes

Ontario

Huntsville

Drip 3/4 in. Female Hose Thread x 1/4 in. Drip Tubing Adapter

★★★★★

Prices start at : 1.47 USD / each

It can be used with a pressure regulator and hose-end timer (both available separately) for added control. Adapter allows simple attachment of 1/4 in. Ideal for connection of small drip irrigation zones and watering of container plants with available...

✓ Use with 1/4 in. drip irrigation tubing
✓ Use with pressure regulated watering devices or with pressure regulator (available separately)
✓ For outdoor use with cold water
✓ Accepts Rain Bird and all other brands of 1/4” Drip irrigation tubing

Fitting Type: Push to Connect Fittings
Pressure Rating: 40

Ontario

Huntsville

1/2 in. Poly Tubing x 3/4 in. Pipe Thread Swivel Adapter

★★★★★

Prices start at : 1.67 USD / each

Pipe thread connector by 1/2 in. Compression fittings are a simple and secure way to assemble your drip irrigation system. Pipe thread outlet to start your drip irrigation system. Easily connect to a 3/4 in.

✓ Compression fittings offer a water tight, secure fit without the need for special tools or glue
✓ Will not suppress water flow
✓ Quick and easy to install

Drip Irrigation Fitting Type: Adapter
Fitting Type: Compression Fittings
Package Quantity: 1

Ontario

Huntsville

Easy Fit Couplings (2-Pack)

★★★★★

Prices start at : 2.86 USD / each

These non-threaded couplings deliver an easy fit for quick installation. Designed to connect hoses. Set up your sprinkler and irrigation system with these Easy Fit Couplings (2-Pack).

✓ Quick tips; dip ends of tubing in warm water for a minute to soften up before inserting into fitting, and twist fitting onto tubing while inserting if necessary
✓ Total satisfaction policy
✓ For drip applications

Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
Product Height (in.): 8.8 in
Product Length (in.): 18.30 in

Ontario

Huntsville

1/2 in. PVC x 0.700 Compression Coupling (25-Pack)

★★★★★

Prices start at : 14.78 USD / each

Poly tubing to 1/2 in. (PVC side will require glue for connection). DIG's D48 makes it simple to connect a 1/2 in. Poly tubing is inserted easily into the compression side without the need for glue or special tools.

✓ Non-threaded, PVC slip connection
✓ Glues onto 1/2 in. PVC

Returnable: 90-Day
Connection: Comp x Slip-Joint
Pressure Rating: 80 PSI at 90 degree
Color Family: Whites

Ontario

Huntsville

1/2 in. 0.710 O.D. Compression Elbow

Prices start at : 1.07 USD / each

Color Family: Blacks
Fitting Type: Compression Fittings
Product Length (in.): 2.5
Product Width (in.): 1
Blue fittings work with a 0.710 O.D. (outside diameter) poly tubing: Yes
Material: ABS Plastic

Ontario

Huntsville

1/2 in. PVC x 0.700 Compression Coupling

★★★★★

Prices start at : 1.12 USD / each

This adapter is primarily used to connect 1/2 in. (.700 O.D.) poly tubing to 1/2 in. PVC pipe with PVC glue. Poly tubing to existing or new PVC sprinkler pipe. The slip side the coupling is glued onto the end of 1/2 in.

Connection: Comp x Comp
Product Width (in.): 1 in
Material: ABS Plastic
Outer Diameter (in.): .50
Glues onto 1/2 in. PVC: Yes
Pressure Rating: 60

Ontario

Huntsville

Fast Fittings 1 in. x 1 in. x 1/2 in. FPT Tee (25-Pack)

Prices start at : 39.68 USD / bag

Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings on the market. The Blazing Fast Fittings 1 in. This line of Clampless fittings require no tools or extra fittings to install.

✓ Friction loss is comparable to traditional insert fittings
✓ Burst pressure exceeds 400 PSI; however, this product is not intended to be used on main lines or under constant pressure
✓ Body material: ABS

Product Height (in.): 1
Drip Irrigation Fitting Type: Coupling
Inner Diameter (in.): 1

Ontario

Huntsville

1/2 in. Tubing Elbow Adapter

Prices start at : 3.97 USD / each

Rain Bird drip irrigation is an ideal watering solution that will provide great results while saving you water. Not only will it help maintain a healthy beautiful landscape which you can enjoy with your friends and family, but it's the most convenient...

✓ 1/2 in. drip tubing elbow with 1/2 in. FPT adapter
✓ Total Satisfaction Policy

Product Length (in.): 2.75
Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
Fitting Type: Push to Connect Fittings,Universal Fittings
Drip Irrigation Fitting Type: Elbow

Ontario

Huntsville

Blue Stripe 1/2 in. Drip Elbows (4-Pack)

Prices start at : 5.76 USD / each

Use to modify or expand a drip system. They feature a no-leak fit and are reusable. Elbows (4-Pack) are a convenient way to reconfigure an existing drip system. The Toro Blue Stripe Drip 1/2 in.

✓ No-leak fit
✓ Reusable and easy to remove

Returnable: 90-Day
Fitting Type: Compression Fittings
Inner Diameter (in.): .625
Product Width (in.): 0.813

Ontario

Huntsville

1/2 in. Drip-Lock Coupling

★★★★★

Prices start at : 0.99 USD / each

0.5

Inner Diameter (in.): 0.5
Product Height (in.): 1.25
Outer Diameter (in.): 0.5
Product Width (in.): 2.25
Connection: Press Fit
For use with drip irrigation: Yes

Ontario

Huntsville

1/2 in. Barb Elbow (10-Pack)

★★★★★

Prices start at : 4.49 USD / each

Each connection offers dual barbed ends to ensure a strong, water tight fit. Route water in drip and micro irrigation systems with the DIG Corp. Barbed outlets. This elbow changes the water's direction 90 degrees and features two 1/2 in.

Inner Diameter (in.): .50
Fitting Type: Barb Fittings
Product Width (in.): 5
Product Height (in.): 6.5
Material: ABS Plastic
Connection: Barb x Barb

Ontario

Huntsville

Blue Stripe 1/4 in. Elbow (15-Pack)

★★★★★

Prices start at : 1.66 USD / each

Since no glue or clamps are required, this product is easy to install. Additionally, a positive no-leak fit keeps your system working properly without water loss. The Toro Blue Stripe 1/4 in.

Barbed, for ease of installation, without tools: Yes
Product Width (in.): 3.75
Outer Diameter (in.): .22
Product Height (in.): 5.5
Drip Irrigation Fitting Type: Elbow
Package Quantity: 15

Ontario

Huntsville

3/4 in. Hose Thread x 1/2 in. 0.700 O.D. Compression Swivel Tee

★★★★★

Prices start at : 2.37 USD / each

Compression fitting provides a secure, water tight fit without the use of glue. Provides a split direction from your drip head assembly. The DIG Hose Thread Swivel Tee is designed to attached your drip irrigation system to a hose thread outlet.

✓ Constructed of UV resistant materials for long life in the landscape
✓ For use with 1/2 in. poly tubing with 0.700 O.D. (outside diameter)
✓ 3/4 in. FHT x 1/2 in compression tee

Package Quantity: 1
Product Height (in.): 3.75
Product Width (in.): 2

Ontario

Huntsville

Drip Irrigation Spot Watering Kit

★★★★★

Prices start at : 32.68 USD / each

Place the Micro Bubblers at the base of shrubs for healthy root development. Insert tees to run multiple devices around larger plants and trees. This versatile hose-connected watering kit has everything you need to create a custom drip irrigation layout...

✓ Waters 15 - 25 plants
✓ Easy to assemble and connect to your outdoor faucet
✓ The kit helps eliminate watering by hand, making it easy to water your plants consistently for faster plant growth, longer lasting blooms and greener leaves.
✓ Includes 12 watering devices: (4) 1.0 GPH emitters, (4) 2.0 GPH emitters, (2) half pattern bubblers, (2) full pattern bubblers
✓ The kit includes two types of watering devices. Use the Spot Emitters near vegetable plants to increase plant yields and reduce weeding

Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

Ontario

Huntsville

1/4 in. Barb Tees (10-Pack)

★★★★★

Prices start at : 1.67 USD / each

Each connection offers raised barbed ends to ensure a strong, water tight fit. Micro tubing, soaker hose or drip-line. Barbed Tee is used to provide a secure connection of three pieces of 1/4 in.

Returnable: 90-Day
Outer Diameter (in.): .25
Product Length (in.): 4 in
Color Family: Blacks
Drip Irrigation Fitting Type: Tee
Connection: Barb x Barb x Barb

Ontario

Huntsville

Blue Stripe Drip 1/2 in. Couplings (4-Pack)

★★★★★

Prices start at : 6.55 USD / each

They will not come apart from a fitting causing water to wash out your plants, and they are reusable. Couplings (4-Pack) are a convenient way to modify or expand your existing drip system.

No-leak fit: Yes
Inner Diameter (in.): .625
Manufacturer Warranty: 1 year
Fitting Type: Compression Fittings
Returnable: 90-Day
Product Height (in.): .813

Ontario

Huntsville

Fast Fittings 1 in. x 1 in. MPT Insert Male Adapter (25-Pack)

Prices start at : 28.27 USD / bag

This line of Clampless fittings require no tools or extra fittings to install. Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings on the market. The Blazing Fast Fittings 1 in.

✓ Body material: ABS
✓ Flow rates are comparable to traditional insert fittings

Inner Diameter (in.): 1
Outer Diameter (in.): 1.315
Manufacturer Warranty: King Innovation products are guaranteed against faulty materials or workmanship for a period of one year from date of purchase. Contact factory for full warranty information
Color Family: Yellows / Golds

Ontario

Huntsville

2-in-1 Pressure Regulating Drip Filter

★★★★★

Prices start at : 14.68 USD / each

Heavy Duty Construction for years of reliable service. Compact design to fit in a standard Valve box. The 2-in-1 stands in the market as the industry's first "one piece" Drip Filter, and 30 psi Pressure Regulator combination.

0.5

Manufacturer Warranty: None
Removable 200 mesh filter with flush port: Yes
Outlet Diameter (in.): 0.5
Product Height (in.): 11
Inlet Diameter (in.): 0.5
Inlet Thread Type: MNPT

Ontario

Huntsville

3/4 in. x 1/2 in. FHT x MHT Hose Adapter

★★★★★

Prices start at : 1.98 USD / each

For drip or micro-irrigation applications. Hose (not included). FHT x MHT Hose Adapter in your drip or micro-irrigation system. Install this 3/4 in. Hose and 1/2 in. This will create a connection between 3/4 in.

✓ One 3/4 in. FHT connection and one 1/2 in. drip tubing connection
✓ Allows connection of 3/4 in. hose and 1/2 in. hose (not included)

Drip Irrigation Fitting Type: Adapter
Product Height (in.): 10.2
Color Family: Blacks
Package Quantity: 1

Ontario

Huntsville