Conveyor Feeder Stacker Aggregate Equipment For Sale In Kansas

Dimensions: 8'-0 Wide x 12'-0 Long x 10'-0 High 1/4" Steel with reinforced sides Lagged Head Pulley 16" Diameter, 2 15/16" shaft Winged Tail Pulley 14" Diameter, 2 15/16" shaft Screw type belt tensions 20 hp TEFC 1,800 RMP 230/460 Volt 2-Ply, 220 PIW...

In order to deal with shock loads of 10 tons and more the Direct Load Stacker uses a very heavy duty build and includes tightly spaced impact rollers, heavy duty 3 ply belting and reinforced frame.

Trailer is not included. Looks to measure out at around 1000 gallons. Not sure of the make and model but the runs runs out good.

New Pit Portable 36"x80'' Radial Stacking Conveyor • Discharge Height: 25' High (18°) - 2 Adjustments • 36" Deep truss, 3x3x1/4 Cord Angle, 2x2x1/4 Lattice • 8" Pipe Axle, 10-Bolt 22" Tires & Wheels • Lagged head Pulley: 14" Diameter, 2 15/16" Shaft...

Superior 48” RazertTail™ Truck Unloader -Grate 10’ x 5’ -Hydraulic self-cleaning ramps -Ramp Bulkhead with hyd raise and lower -Single axle -Brakes, Lights, Mud flaps -Crank down landing jacks -15 hp electric pumping unit -Adjustable flow gate -Electrical...

Contact us for more information and pricing.. Pioneer Heavy Duty 60x20 Apron Feeder. Overall length is 22'.

SHAPE, WORKING DAILY CEDAR RAPIDS 24" X 60' RADIAL STACKER, 24" BELT, EXCELLENT SHAPE. 24 x 60 RADIAL STACKER, EXC. CALL FOR MORE INFORMATION.

40' AND 50' RADIAL STACKER/CONVEYORS AVAILABLE. CALL FOR MORE INFORMATION.

Telsmith 42"x12' apron feeder previously used to feed a 3042 jaw crusher.

E) Electric motor control panel pre-wired to the electric motor. Rock Systems Heavy Duty Portable Low Profile Drive-Over Truck Unloader, Model P104-LP complete as follows: a) Low profile truck dump 7’-8” long x 9’-8 1/2” wide x 37” tall complete...

Goodfellow 36" x 70' 3-Pak Roll on Convoy 36" x 70' lattice frame stackable conveyors 3 pak combo. Conveyors are grasshopper style with adjustable running gear and are highly portable.

Works extremely well in sandy soils where material dug out can be used in backfill, very good condition Trench backfill conveyor - 48" x 72', 12 yard hopper, 61,000 lbs, repowered with 2005 Perkins 5.9L model 1006-6TW with 122 hours on engine, 6 wheel...

Excellent Condition Has 50 ton hopper can load out up to 2100 ton per hour Loads approximately 710 ton per hour sand and gravel at 8 feet per minute with 20 hp motor at 13 amps 180 to 1 dodge box with hopper Approximately 100,000 pounds

• 16" Self-cleaning flat bar tail pulley with 2 7/16" diameter tail shaft and adjustable 44" take-ups. • 35° x 5" dia. 6' receiving hopper with 6" rubber flashing. • Belt speed approximately 320 FPM.

36" Wide x 60' Long Radial Stacker Rock Systems 36” wide x 60’ long radial stockpiling conveyor complete with Weg 15 h.p. electric motor, v-belt drive with OSHA drive guard, Dodge TXT4 shaft mount reducer with internal backstop, Dodge 14” diameter...

30 CUBIC YARD FEED HOPPER 42"X25' BELT FEEDER, 15HP WEG SEVERE DUTY MOTOR, 5"X46" FLAT ROLLERS ON 10" CENTERSVERY GOOD CONDITION, USED ONLY FOR COAL FINES, HEAVY DUTY SKID BASE, HOPPER DUMP OPENING 48"X90"X192", LOWER FEED OPENING 32"X171", DISASSEMBLED...

Iron City Supply HD End Dump Truck Unloading Conveyor. Conveys up to 1500 tons per hour of 100pcf material. 26" dump height, 7.5' discharge height. Electric, diesel, or hydraulic motor options

36" x 150' telescopic conveyor. Low profile telescopic conveyor Masaba track technology Auto stockpiling Available for rental

Tracked truck unloader. Large capacity truck unloader Radial stokpiling Conveyor Full remote control

Feeder conveyor

ROLLS, SEALED FOR LIFE BALL BEARINGS - LOAD AREA: 20 DEGREE TROUGH, 12-16" SPACING - TROUGH: 35 DEGREE ON 4' SPACING - RETURNS: STEEL ROLLS, ON 10' SPACING - RADIAL HOPPER: SLOPED, 5' LONG, BOLT ON DESIGN - GATHERING TROUGH: 5' LONG WITH ADJUSTABLE RUBBER...

Heavy Duty Barge/Ship Loading System Rock Systems heavy duty barge/ship loading system complete with heavy duty feed hopper constructed of 1" thick steel plate with reinforcing; 46" wide x 20’ long vibrating pan feeder with 30 h.p. electric motor drive;...

80' diesel powered stacker. 80' long x 36" wide belt Deutz diesel engine

36” X 70’ PORTABLE TRANSFER CONVEYORS – 3 PACK Main Frame – 30” Deep truss with recessed idlers Chord Angles – 4” x 4” x 1/4” Lattice Angles - 2” x 2” x 3/16” Lattice Tubes – 2” x 2” x 3/16” Cross Angles – 2” x 2” x 3/16” Cross Channels...

KOLBERG 47-3670 ROLL-AWAY STACKABLE 3-PACK CONVEYORS, EQUIPPED WITH: - FRAME - 30" DEEP HEAVY DUTY LATTICE TYPE FRAME DESIGNED WITH RECESSED RECEIVING TROUGH; TROUGHING AND RETURN IDLERS TO ALLOW FOR STACKING ONE ON ANOTHER FOR EASEOF TRANSPORTATION -...

Simplicity 3' X 8' Vibrating Grizzly Feeder Simplicity 36" X 8' Vibrating Grizzly Feeder - Nice little VGF for small plant.