Construction Equipment Conveyor Feeder Stacker For Sale In San Antonio

M60 conveyor with diesel engine

SUPERIOR 42" X 70' PORTABLE RADIAL STACKING CONVEYOR, EQUIPPED WITH: CONVEYOR FRAME: - MAIN FRAME: 30" DEEP TRUSS - CHORD ANGLES: 3" X 3" X 1/4" - LATTICE MEMBERS: 1 1/2" X 1 1/2" X 3/16" - EXTRA CHORD ANGLE: NOT INCLUDED DRIVE SPECIFICATIONS: - DRIVE:...

Superior 48” RazertTail™ Truck Unloader -Grate 10’ x 5’ -Hydraulic self-cleaning ramps -Ramp Bulkhead with hyd raise and lower -Single axle -Brakes, Lights, Mud flaps -Crank down landing jacks -15 hp electric pumping unit -Adjustable flow gate -Electrical...

IT IS THE RESPONSIBILITY OF THE END USER TO HAVETHEM CHECKED BY A LOCAL INSPECTOR - FRAME REINFORCEMENT PACKAGE WITH 2" X 2" UPRIGHTS AND 2" X 4" TUBULAR CORD ANGLE - (2) LIFTING EYES - AT CONVEYOR 1/3 POINTS - (4) ADJUSTABLE SUPPORT LEGS

IT IS THE RESPONSIBILITY OF THE END USER TO HAVETHEM CHECKED BY A LOCAL INSPECTOR - FRAME REINFORCEMENT PACKAGE WITH 2" X 2" UPRIGHTS AND 2" X 4" TUBULAR CORD ANGLE - (2) LIFTING EYES - AT CONVEYOR 1/3 POINTS - (4) ADJUSTABLE SUPPORT LEGS

Bedding Conveyor - Detroit Power Used for Pipe bedding - Wheeled arms swing out to straddle the trench, pull and feed with excavator

• 35° x 5" dia. CEMA "C" troughing and return rollers. • 24" deep lattice frame construction with 3"x3"x1/4" chord angles. • 2 guide rolls on the return belt side at the tail end of the conveyor.

New Pit Portable 36"x100'' Radial Stacking Conveyor • Discharge Height: 31' High (18°) - 4 Adjustments • 36" Deep truss, 3x3x1/4 Cord Angle, 2x2x 1/4 Lattice • 8" Pipe Axle, 10-Bolt 22" Tires & Wheels • Wrap Type mid drive • Lagged head Pulley:...

16" Self-cleaning flat bar tail pulley with 2 3/16" diameter tail shaft and adjustable 44" take-ups. 24" deep lattice frame construction with 3"x3"x1/4" chord angles. CEMA "C" troughing and return rollers.

46"x8' apron feeder with locked up electric motor and gear box that appears to be ok. Made to go under a lime bin. Est wgt: 5,000 lbs Flighting is not thick enough for abusive rock situation.

80' Diesel powered radial conveyor New and ex rental units available.

New GCS Pit Portable 48"x60'' Radial Stacking Conveyor • Discharge Height: 19' High (18°) - 2 Adjustments • 24" Deep truss, 3x3x1/4 Cord Angle, 2x2x1/4 Lattice • 6" Pipe Axel, 8-Bolt 16" Tires & Wheels • Lagged head Pulley: 14" Diameter, 2 15/16"...

(Less required electric motor). Including 42”x8’ Belt Feeder w/wing tail, herringbone lagged head & drive pulley, 5” diameter, flat roll idlers mounted on 7” centers, Dodge 4 reducer, jackshaft and final sprocket & chain drive.

It is the responsibility of the end user to have them checked by a local inspector Prime – Sandblasted, (1) coat primer painted Paint – (1) coat enamel in customer specified color Owners Manual – (1) copy for maintenance and parts Electrical Switch...

Superior 36x60 Stackable Plus Conveyor -Undercarriage -Vulcanized splice -Cema C Idlers -3 Ply Belt -850TPH

KPI channel frame design Head Section - rubber lagged head pulley Tail Section - wing type self cleaning tail pulley Hydraulic drive - plumbed to tail end, 12 gpm @ 2,000 psi Receiving trough with radial hopper design Idlers- CEMA B 20 and 35 degree idlers...

KOLBERG 47-3670 ROLL-AWAY STACKABLE 3-PACK CONVEYORS, EQUIPPED WITH: - FRAME - 30" DEEP HEAVY DUTY LATTICE TYPE FRAME DESIGNED WITH RECESSED RECEIVING TROUGH; TROUGHING AND RETURN IDLERS TO ALLOW FOR STACKING ONE ON ANOTHER FOR EASEOF TRANSPORTATION -...

Hewitt Robins model 550 dozer trap/belt loader with 60” wide x 50’ long conveyor with full length skirtboards, 100 h.p. electric motor drive, 9’ x 6’-6” dozer trap opening, tandem axle chassis, date of manufacture 1980

Overall, fair to good condition. 2-ply belt in good condition. 30"x30' conveyor on 6" channel frame with smooth head & tail pulleys, 20 degree idlers, Browning gear reducer.

Located in Wynot NE 402-841-3604 We also have wash plant and blade mill and some more conveyors. 24" x 60' Radial Stacker Conveyor with 3 phaze motor works great and replaced the belt last year.

10" deep channel frame construction. F.O.B.: Phoenix, AZ 2-ply belting with 3/16"x1/16" covers. 36" x 20' Channel Frame Specifications: 10 HP WorldWide industrial grade motor and Leroy Somers 203 shaft mount reducer.

Belt feeder with hydraulic dump grizzly, 36" feed conveyor.

Capacity up to 1,100 TPH. Eriez Model 42 [42" X 72"] Electro-mechanical Feeder.

Includes electric motor controls and wiring. Rock Systems Model 104-A Drive-Over Unloader Rock Systems drive-over unloader, model 104-A, complete with truck dump 8’-8” long x 10’ wide x 8’-10” tall; hopper with adjustable skirtboards, pipe grizzly...

100' x 36 track conveyor

Rock Systems Model 108-4P Portable 4 Bin Blending Hopper Rock Systems portable 4 bin blending hopper complete with 9’-6” wide x 14’ long bins with 20 ton storage capacity each; 30” wide roller belt feeders with 5 h.p. fixed speed electric motor drives,...