Construction Equipment Attachments For Sale In Buffalo

Like New Fits DB linkage 100MM 90 MM Pins 60 Inch Wide

Interior Panels, Covers, Vents: There are a few panels with this cab shell. Cab Overall Condition Rating (1-10, 1= Worst, 10=Best): 7 Weight for Shipping: 2,000 lbs. Operators Seat: No seat.

Dimensions for shipping: 6 feet, 3 feet Wide, 22 feet Long Description: All of the pin holes on this boom appear to be in decent shape. Weight: 6,200 lbs. No cracks or repairs have been found..

The machine this boom was on had burned and the base of the boom has taken a little heat from the fire. Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 20 feet Long All of the pin holes on this boom are in good condition and no cracks have...

On the LH and top of this boom, where it pins to the machine has been repaired and plated (see photos). Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 19 1/2 feet Long Description: All of the pin holes on this stick are in good condtition.

There are no cracks or repairs present on this stick. The bushing for the pin hole where the bucket pins to the stick looks like it may have some wear. Description: The working length of this stick is 10 feet, 3 inches or 3.1 Meters.

All of the pin holes appear to be in good shape and no cracks or repairs have been found. Dimensions for shipping: 2 feet High, 3 feet Wide, 13 feet Long Description: The working length of this stick is 9 feet, 2 inches or 2.8 meters.

Dimensions for shipping: 3 feet High, 5 feet Wide, 11 feet Long Description: All of the pin holes and all of the pin boss surfaces look good on this boom. Weight: 3,800 lbs. No cracks have been found.

Stick Information

LIGHTS, GAUGES, HEATER ARE IN GOOD CONDITION. HAS A/C WHICH IS NOT WORKING. ALL WIPER ARMS MISSING. VINYL SEAT HAS A FEW TEARS IN IT. CONTROL LINKAGE HAS SOME WEAR.

All of the pin holes appear to be in good shape and no cracks or repairs have been found. Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long Description: The working length of this stick is 9 feet, 7 1/2 inches long or 2.94 meters.

All of the other pin holes appear to be in decent shape, althought some of the bushings are showing some wear. Dimensions for shipping: 2 1/2 feet High, 3 1/2 feet Wide, 9 feet Long

The debris guard is also broken away from the moldboard on both sides of it. Dimensions for Shipping (Height x Width x Length): Blade Dimensions: 2 ft. Condition of any Hydraulic Cylinders (Tilt, Angling, etc.): Both of the angling cylinder rods...

Dimensions for shipping: 5 feet High, 3 feet Wide, 16 feet Long Description: All of the pin holes appear to be in good condition and no cracks or repairs have been found. Weight: 1,800 lbs.

GEARAMATIC WITH DRIVE SHAFTS.

Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 15 feet Long Description: All of the pin holes on this boom are in good shape and no cracks have been found. Weight: 1,500 lbs.

*THESE TRACKGROUPS WILL FIT ANY EXCAVATOR WITH THE SAME PITCH AND LINK COUNT NO MATTER THE MAKE OR MODEL* RATE 6 ESTIMATED PERCENTAGES FOR BOTH LH/RH SIDES: GROUSER HEIGHT: 70% LINK HEIGHT: 60% BUSHING OD: 60% PITCH: 60% MFG: KOBELCO SEALED TRACK TYPE...

Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 14 1/2 feet Long Description: All of the pin holes on this boom appear to be in good shape. Weight: 2,000 lbs. No cracks or repairs have been found.

(Outer bushing part number: 61EN-13320). The working length of this stick is 10 feet, 1 1/2 inches or 3.05 meters. Dimensions for shipping: 2 feet High, 4 feet Wide, 15 feet Long. This stick is missing both outer bushings for the bucket pin.

It includes the following components: Boom-25 foot long boom section. All pin holes appear to be in good shape.and no cracks can be seen. Description: This is a complete, 3 piece material handling boom set-up.

RECEIVED CAB GLASS NEW... NOT INSTALLED ...

This stick has whats left of a thumb mount, welded to it. All of the pinholes appear to be in decent condition. Description: The working length of this stick is 9 feet, 7 1/2 inches.

6.6 METER Weight: 9,000 lbs. Dimensions for shipping: 7 1/2 feet High, 3 1/2 feet Wide, 24 feet Long

All of the pin holes look good and no cracks have been found. Dimensions for shipping: 1 1/2 feet High, 4 feet high, 15 1/2 feet Long Description: The working length of this stick is 11 feet, 4 inches.

Dimensions for shipping: 5 feet High, 3 feet Wide, 21 feet Long Description: All of the pin holes appear to be in good shape and no cracks have been found. Weight: 4,500 lbs.