Construction Equipment Asphalt Pavers Concrete Equipment For Sale In Mesa

REAR ENGINE DEUTZ 5 CLY. 04-MACK CX613 / BERGKAMP HD10 MICROPAVER 04-MACK CX613/BERGKAMP HD10 MICRO-PAVER SYSTEM ,427HP MACK.10 SP. OTHERS AVAILABLE ,WE EXPORT, HABLAMOS ESPANOL. 600 gal EMULSION & WATER.

10 gallon capacity, hand agitation, leak free trigger controlled dispensing valve, 80,000 BTU propane torch w/hose & regulator, steel rear wheels, steel front caster wheel, temperature thermometer, hinged lid.

8' TO 12' SCREED, DIESEL POWERED, PROPANE HEATED SCREED, VIBRATORY SCREED, VERY CLEAN, PLEASE CALL!!

Farm rates as low as 3.72% and Construction 6.5 %. Let me help you sell your equipment. Ready to start screening. Screens and belts are in very good condition. Very good condition.

Milling Machine, Ex Government, 40 inch Cut, Deutz 6 cyl turbo Diesel

CT 36-8A-V L x W x H (with handle, fixed version) in 79 x 36 x 41 Weight (Operating) lb 208 Troweling diameter in 36 Pitch range ° 0 - 30 RPM - area rpm 25 - 200 Quantity of blades 4 Engine / Motor Air-cooled single-cylinder four-cycle gasoline engine...

Self erecting silo. $12,500.00 Or Best Offer Unable to locate the serial number on this unit. Insulated tank. Unsure of make, model or tonnage. Tank is 10' wide by 16 long. Cones are 7 feet on the bottom and 2 feet on the top.

STOCK #A489, 1988 Gilson 59038-47619 Cement Mixer, Nationwide Delivery Available

Cummins Diesel, 8-16 ft Screed, Dual Controls hour meter reads - 1220

STOCK #F174, *PARTING OUT*, 2003 Terex RS425B Profiler, Delivery Available

STOCK #A405, 2002 Aeroil HET-80 Tar Wagon, 10.1' in Length, 72.1" in Width, 6' in Height, 1590Lb. Axle, Spring Suspension, Disc Wheels, 15" Tires, Steel Frame-Open Channel, Pin Setting 2 3/4" Adjustable Pintle Hitch, Electric Brakes, Steel Box, Single...

Allison TransmissionRebuilt Drum 92"Weight: Approximately 54,000 lbsLocation ILREDUCED PRICE $62,000.00 USD REDUCED PRICEDresser SP 780 Milling MachineSN 29122-1671 Detroit Diesel Engine

Fae SOIL Stabilizer used in ag application

2011 Allen Engineering 446FPH 46" Walk-Behind Trowel 46" walk-behind trowel with 9 hp engine and a long line pitch handle.

Also available with 6 ft spray bar or 8 ft spray bar. New tack distributor 10GPM pump, Honda 5.5 hp gas engine, 250 gallon capacity, 5 ft spray wand with 40 ft hose, 10" filler lid, hose reel, electric brakes, trailer mounted, propane heat, flushing tank.

K & D striping Kettles 1000 lbs each, propane burners, Honda engine, hoist. We export, hablamos espanol. Hand striper thermo equip also available. Tandem axel trailer, cat-walks , arrow board system,cleaned painted, serviced.

1985 Galion Dresser RP-60 Milling Machine, 6 Cylinder Perkins Diesel, Excellent Rubber, Runs and Works Good, $17,800, For more info call Don 502-417-5012

Call for details on different models. New Marathon infrared heater. Walk behind infrared heater, 3 ft x 3 ft, 360,00 BTU propane heat, heats up very quickly, Also available by order only- 10 inch x 8 ft paver mount heater or 10 inch x 4 ft walk behind...

New Marathon crack router. Not a stock unit on our yard. This unit would have to be ordered from factory. Pavement crack router, 30 hp Kohler gas engine, carbide tipped router blades (1 set) mounted on the machine to rout 1/2" width, dual element air...

For more info Call Angelo 1-800-361-2282 Less than 200 hours of demo time. Practically brand new.

Etnyre TP5700 galones Asphalt Tank, Burner system, Brand new burner, good condition Etnyre TP5700 galones Asphalt Tank.

We just do not have any other jobs for it and too nice to sit waiting thus it is available. 1993 SF450B Pave to 25ft Series 2 Kit , Poly Pads, Minnich vibration monitor system, Unit was last used at Barnes Air Mational Guard base Westfield Mass 2013 and...

2013 Husqvarna PG280 Electric Floor Grinder 115V electric walk behind floor grinder

Edco 5-head pneumatic scabbler that works perfect..

1998 MCNEILUS SLIDER 13YD MIXER TANK, S/N 48260, TANDEM AXLE, REAR DISCHARGE, LANDING GEAR, UNIT RUNS AND OPERATES GOOD

2002 CMI PR800-7 8,000 Hours 7’ 2” Drum Works and Runs EXW: West Coast Please Contact: Donnie at 817-504-1767

2- AVAILABLE WORK READY Click on our COMPANY name to check our huge variety of inventory ETNYRE K-series CHIPSPREADER ETNYRE K-series CHIPSPREADER 12,5 HEADER, S/N K-5XXX, CUMMINS DIESEL, 2WD.JOYSTICK CONTROLL.EX-DOT RUNS-OPERATES VERY WELL.