Agiseek home

Auto Maintenance Parts Replacement Auto Parts For Sale In Buffalo

Become a Partner
Total Solution Semi-Metallic Brake Pads
Prices start at : 39.99 USD

  •  Rubberized shim technology substantially reduces noise
  •  Shipping Dimensions: Approximately 8 x 5 x 3 inches.
  •  Vehicle-specified engineered formulations providing clean, quiet braking and long service life
  •  Monitor wear to reduce damage to rotors
  •  Reduces vibration that can cause braking noise
New York
Buffalo
Ball Joint
Prices start at : 32.19 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog ball joints incorporate proven design and engineering features for like new steering and longer life.
  •  Larger grease reservoir & easy-to-install pre-tapped grease fitting hole for improved maintenance
  •  Weight: Approximately: 1.4 pounds
  •  Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction & enhanced strength
  •  Premium forged housing with increased cross section material in key areas
  •  Greaseable socket reduces corrosion & wear by allowing new lubricant to flush contaminants
New York
Buffalo
Wheel Bearing & Hub Assembly
Prices start at : 141.09 USD

Precision tolerances and improved surface finishing reduce noise and vibration, and high quality reproduction sensors prevent the compromise of ABS functions. From the composition of the steel to the quality of the bearing and seals, every aspect of a...
  •  OE sensors assure correct ABS functions & prevent malfunctions
  •  Shipping Dimensions: Approximately 7 x 7 x 7 inches.
  •  Weight: Approximately: 8.23 pounds
  •  Premium seals, both inboard & outboard, protect the bearing from contamination
  •  High-quality steel & surface finishes prolong the lifespan and prevent bearing noise
New York
Buffalo
Wheel Bearing & Hub Assembly
Prices start at : 258.89 USD

Precision tolerances and improved surface finishing reduce noise and vibration, and high quality reproduction sensors prevent the compromise of ABS functions. From the composition of the steel to the quality of the bearing and seals, every aspect of a...
  •  Weight: Approximately: 12.91 pounds
  •  High-quality steel & surface finishes prolong the lifespan and prevent bearing noise
  •  Shipping Dimensions: Approximately 9 x 9 x 8 inches.
  •  OE sensors assure correct ABS functions & prevent malfunctions
  •  Premium seals, both inboard & outboard, protect the bearing from contamination
New York
Buffalo
Brake Electronic Wear Sensor
Prices start at : 9.99 USD

Wagner Brake Electronic Wear Sensors deliver improved OE-design products to the aftermarket, giving you the capability to repair and improve a brake system with the finest products possible.
  •  Weight: Approximately: .12 pounds
  •  Maintains proper movement for safe, effective stopping performance
  •  Shipping Dimensions: Approximately 10 x 6 x 1 inches.
  •  This product cannot be shipped to: CA
New York
Buffalo
Stabilizer Bar Link
Prices start at : 52.79 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog stabilizer bar links incorporate proven design and engineering features for like new steering and longer life.
  •  Greaseable socket reduces corrosion & wear by allowing new lubricant to flush contaminants
  •  Quiet, dependable operation
  •  Weight: Approximately: .93 pounds
  •  Shipping Dimensions: Approximately 13 x 4 x 3 inches.
New York
Buffalo
Control Arm
Prices start at : 126.19 USD

  •  Pre-greased - no
  •  Length - 19.570 in.
  •  Greaseable/grease fittings included - no/no
  •  Hardware included - no
  •  Weight: Approximately: 6.38 pounds
  •  Front Passenger Side Lower Non-Adjustable
New York
Buffalo
Tie Rod End
Prices start at : 148.99 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life.
  •  Powdered metal gusher bearing design enables grease to flow through for reduced friction & enhanced strength
  •  Sunoloy-coated metal bearings provide the smooth stud swing that technicians & drivers love
  •  Greaseable sockets reduce corrosion & wear by allowing new lubricant to flush contaminants
  •  Shipping Dimensions: Approximately 20 x 4 x 2 inches.
  •  The cover plate design allows for tighter tolerances for a more durable part
New York
Buffalo
Tie Rod End
Prices start at : 57.89 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life.
  •  Exclusive cover plate protects against contaminants leaking into the bearing surface
  •  Shipping Dimensions: Approximately 14 x 2 x 2 inches.
  •  Weight: Approximately: 1.1 pounds
  •  Sunoloy-coated metal bearings provide the smooth stud swing that technicians & drivers love
  •  The cover plate design allows for tighter tolerances for a more durable part
New York
Buffalo
Stabilizer Bar Bushing Kit
Prices start at : 17.29 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog stabilizer bar bushing kits incorporate proven design and engineering features for like new steering and longer life.
  •  Restores like-new steering & handling
  •  Inner sleeve is phosphate coated for corrosion protection
  •  Shipping Dimensions: Approximately 5 x 3 x 3 inches.
  •  Weight: Approximately: .36 pounds
  •  Bushings are engineered to provide long life & dependability
New York
Buffalo
Tie Rod End
Prices start at : 44.29 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life.
  •  Weight: Approximately: 2.18 pounds
  •  Sunoloy-coated metal bearings provide the smooth stud swing that technicians & drivers love
  •  The cover plate design allows for tighter tolerances for a more durable part
  •  Exclusive cover plate protects against contaminants leaking into the bearing surface
  •  Greaseable sockets reduce corrosion & wear by allowing new lubricant to flush contaminants
New York
Buffalo
Control Arm & Ball Joint Assembly
Prices start at : 72.89 USD

  •  Ball Joint attachment type - press in
  •  Greaseable/grease fittings included - no/no
  •  Front Passenger Side Upper Non-Adjustable
  •  See store for specific vehicle fitment
  •  Hardware included - yes
  •  Bushings included - yes
New York
Buffalo
Differential Pinion Seal
Prices start at : 13.49 USD

SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase...
  •  Incorporates a seal lip design that meets or exceeds OE specifications
  •  High-grade carbon steel, coated with phosphate to ensure rust protection
  •  Weight: Approximately: .14 pounds
  •  Reliable & dynamic sealing while ensuring a long service life
  •  Designed for tough exclusion of dirt & contaminants
New York
Buffalo
ABS Sensor Cord
Prices start at : 57.29 USD

ABS-integrated hub units from SKF can help. As the sophistication of ABS systems have increased, so have the demands for better signal quality and lower speed detection capabilities of hub bearing integrated sensors.
  •  Shipping Dimensions: Approximately 9 x 6 x 3 inches.
  •  This product cannot be shipped to: CA
  •  ABS cords provide a cost saving alternative to a complete hub assembly replacement
  •  Precisely engineered to OEM specifications to meet the demands of today's road conditions
New York
Buffalo
Steering Damper
Prices start at : 36.95 USD

Acting as a horizontal shock absorber, Monroe Magnum steering stabilizers help reduce vibrations that travel through the steering system to the driver. The Monroe Magnum steering stabilizer stops vibration before it gets to the driver.
  •  Weight: Approximately: 3.83 pounds
  •  This product cannot be shipped to: CA
  •  Special, self-lubricating fluid seal designed to retain gas without excessive wear or friction
  •  Ideally suited for trucks, vans, & 4-wheel drive vehicles
  •  1/2 in. heavy-duty, nitrocarburized rod for long service life
  •  Sintered iron piston is stronger than traditional metals to enhance durability for long service life
New York
Buffalo
Steering Damper
Prices start at : 33.95 USD

Acting as a horizontal shock absorber, Monroe Magnum steering stabilizers help reduce vibrations that travel through the steering system to the driver. The Monroe Magnum steering stabilizer stops vibration before it gets to the driver.
  •  Shipping Dimensions: Approximately 20 x 4 x 3 inches.
  •  Ideally suited for trucks, vans, & 4-wheel drive vehicles
  •  1/2 in. heavy-duty, nitrocarburized rod for long service life
  •  All-weather fluid contains special modifiers to reduce friction & ensure smooth rod reaction
  •  Weight: Approximately: 3.84 pounds
  •  Special, self-lubricating fluid seal designed to retain gas without excessive wear or friction
New York
Buffalo
Stabilizer Bar Bushing Kit
Prices start at : 17.59 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog stabilizer bar bushing kits incorporate proven design and engineering features for like new steering and longer life.
  •  Restores like-new steering & handling
  •  Shipping Dimensions: Approximately 5 x 3 x 3 inches.
  •  Split design allows for easier installation
  •  Inner sleeve is phosphate coated for corrosion protection
  •  Bushings are engineered to provide long life & dependability
New York
Buffalo
Exhaust Pipe Adapter
Prices start at : 25.99 USD

Made from high-grade materials, this AP Exhaust Technologies product is known for its outstanding reliability. Featuring solid workmanship, it provides reliable service for years ahead.
  •  6 in. length
  •  Shipping Dimensions: Approximately 28 x 11 x 4 inches.
  •  6 in. inner diameter
  •  Provides years of reliable service
  •  This product cannot be shipped to: CA
New York
Buffalo
U-Joint
Prices start at : 24.69 USD

  •  Bearing cups ground & slightly oversized to fit in a used drive shaft
  •  Shipping Dimensions: Approximately 3 x 3 x 1 inches.
  •  Nitrile rubber grease seals have compressed double lip design for protection from contaminants
  •  Needle bearings & snap rings from an original equipment supplier
  •  Greaseable - allows new grease to flush out contamination & moisture reducing corrosion & water
New York
Buffalo
Stabilizer Bar Link
Prices start at : 59.49 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog stabilizer bar links incorporate proven design and engineering features for like new steering and longer life.
  •  Quiet, dependable operation
  •  This product cannot be shipped to: CA
  •  Weight: Approximately: .51 pounds
  •  Provides like-new steering, ease of installation, & longer life
New York
Buffalo
Stabilizer Bar Link
Prices start at : 75.99 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog stabilizer bar links incorporate proven design and engineering features for like new steering and longer life.
  •  Shipping Dimensions: Approximately 20 x 4 x 2 inches.
  •  Quiet, dependable operation
  •  Provides like-new steering, ease of installation, & longer life
  •  Weight: Approximately: 1.42 pounds
New York
Buffalo
Strut-Mate Shock Mounting Kit
Prices start at : 33.69 USD

In addition, Monroe's full line will provide you with late model original equipment coverage, as well as complementing the ride control characteristics of Monroe struts. Every new strut deserves a Strut-Mate Mounting Kit.
  •  Robust bearing plate helps ensure consistent, precise steering return by eliminating memory steer while reducing noise & improving overall smoothness
  •  SAE-grade nuts & bolts meet OE design
  •  This product cannot be shipped to: CA
  •  Upper spring seat provides consistent performance without transmitting noise or vibration into the chassis
  •  Premium bearing is manufactured to meet OE performance
New York
Buffalo
Total Solution Semi-Metallic Brake Pads
Prices start at : 54.99 USD

  •  Weight: Approximately: 3.21 pounds
  •  Moly-based synthetic oil lubricant
  •  Ensure less pad separation, vibration and noise
  •  Vehicle-specified engineered formulations providing clean, quiet braking and long service life
  •  Reduces vibration that can cause braking noise
New York
Buffalo
Parking Brake Hardware Kit
Prices start at : 11.99 USD

Installing new premium hardware will complement a disc pad and/or brake shoe replacement, and ensure optimal braking performance. Wagner Parking Brake Kits are the key to doing a quality job right the first time.
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 7 x 4 x 2 inches.
  •  Produces smoother pedal travel
  •  Helps deliver a quieter braking system
New York
Buffalo
Total Solution Ceramic Brake Pads
Prices start at : 54.99 USD

  •  Reduces vibration that can cause braking noise
  •  Shipping Dimensions: Approximately 8 x 5 x 3 inches.
  •  Moly-based synthetic oil lubricant
  •  Monitor wear to reduce damage to rotors
  •  This product cannot be shipped to: CA
New York
Buffalo
Total Solution Semi-Metallic Brake Pads
Prices start at : 69.99 USD

  •  Shipping Dimensions: Approximately 8 x 7 x 3 inches.
  •  Weight: Approximately: 5.88 pounds
  •  Moly-based synthetic oil lubricant
  •  Rubberized shim technology substantially reduces noise
  •  This product cannot be shipped to: CA
New York
Buffalo
Total Solution Ceramic Brake Pads
Prices start at : 54.99 USD

  •  This product cannot be shipped to: CA
  •  Ensure less pad separation, vibration and noise
  •  Weight: Approximately: 3.81 pounds
  •  Moly-based synthetic oil lubricant
  •  Vehicle-specified engineered formulations providing clean, quiet braking and long service life
New York
Buffalo