Auto Maintenance Parts Engine Ignition For Sale In South Carolina

• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Made from high quality material
• ✓ Weight: Approximately: .2 pounds
• ✓ This product cannot be shipped to: CA

• ✓ With jiggle pin
• ✓ Part Number - 45878
• ✓ Weight: Approximately: .2 pounds
• ✓ 180 degrees SuperStat
• ✓ Premium thermostat
• ✓ This product cannot be shipped to: CA

• ✓ Available in 5 pole unit with removable clear protective cover
• ✓ This product cannot be shipped to: CA
• ✓ Available in side or bottom positioned 1/4 in. Q.C. terminal configurations
• ✓ Unit with bottom Q.C. terminals includes detachable side mounting brackets

• ✓ 1-47/64 in. x 29/32 in. x 13/16 in.
• ✓ Weight: Approximately: .15 pounds
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ This product cannot be shipped to: CA
• ✓ Premium thermostat

• ✓ Weight: Approximately: .2 pounds
• ✓ Powered by a precisely formulated thermal-responsive wax pellet in a heat conducting copper cup equipped with a stainless steel piston
• ✓ Stainless steel
• ✓ The heat motor is 100 percent calibrated to ensure quality and performance
• ✓ Shipping Dimensions: Approximately 2.63 x 2.63 x 2.63 inches.

• ✓ Additional exchange fees may apply
• ✓ New insulators & hardware
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ Weight: Approximately: 10.5 pounds
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.

• ✓ Red incandescent indicator lamp LED
• ✓ Shipping Dimensions: Approximately 4.75 x 2.75 x 1 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .07 pounds

• ✓ Weight: Approximately: .09 pounds
• ✓ 5.5mm2
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.

• ✓ Shipping Dimensions: Approximately 9.75 x 7 x 2.25 inches.
• ✓ Weight: Approximately: .8 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Help Hotline toll-free number printed on kit
• ✓ Includes easy-to-follow illustrated instructions in English, Spanish & French
• ✓ Contains starter drive, drive end bushing, needle bearing set, brush set & thrust washers

• ✓ New insulators & hardware
• ✓ Weight: Approximately: 12.7 pounds
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ New brushes, brush springs and bearings
• ✓ Startors tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.

• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Makes connecting & disconnecting wires quick & easy
• ✓ 2.0mm2
• ✓ Weight: Approximately: .03 pounds

• ✓ New brushes, brush springs and bearings
• ✓ Weight: Approximately: 10.5 pounds
• ✓ This product cannot be shipped to: CA
• ✓ All external mounting holes re-threaded
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new

• ✓ (2.0mm2) .250 in. tab (6.4mm)
• ✓ Makes connecting & disconnecting wires quick & easy
• ✓ This product cannot be shipped to: CA

• ✓ Button terminals
• ✓ Shipping Dimensions: Approximately 4.8 x 2.8 x 2.25 inches.
• ✓ Includes 2 removable keys
• ✓ Weight: Approximately: .34 pounds

• ✓ Includes gauge & mounting hardware
• ✓ Includes 12 Volt internal backlighting
• ✓ Popular mini gauges packaged conveniently for easy installation
• ✓ Standard 1-1/2 in. black dials
• ✓ Includes Mechanical Oil/Water Temperature, Electrical Voltmeter & Mechanical Oil Pressure gauges
• ✓ Shipping Dimensions: Approximately 8 x 7 x 3.6 inches.

• ✓ 195 degrees SuperStat
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ This product cannot be shipped to: CA
• ✓ 1-13/16 in. x 3/4 in. x 61/64 in.
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.

• ✓ Briggs & Stratton genuine product
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Used With Equipment Type: Walk-Behind Mower
• Part Type: Engine Part
• Fits Models: Multiple
• Product Depth (in.): 34 in

• ✓ Dura lube gear-driven splash lubrication continuously applies oil to all internal parts
• ✓ Dual ball bearings reduce wear for long life

• Part Type: Engine Part
• Manufacturer Warranty: Consumer Use: 2 Years / Commercial Use: 1 Year
• Engine Part Type: Engine
• Product Depth (in.): 17

• ✓ For use with all Beast and Stanley mowers with key start
• ✓ Replacement keys are designed to fit snugly into the mower engine ignition switch
• ✓ Includes a set of 2 keys for starting, stopping and operating a mower engine

• Manufacturer Warranty: All sales are final. No warranty is offered for this item.
• Engine Part Type: Ignition Keys
• Returnable: 90-Day

• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ 2.15 in. outside diameter
• ✓ Weight: Approximately: .2 pounds
• ✓ Grooved
• ✓ Resistant to high temperatures

• ✓ This product cannot be shipped to: CA
• ✓ Made from high quality material
• ✓ Resistant to high temperatures
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.

• Returnable: 90-Day
• Product Depth (in.): 20.25
• Product Height (in.): 1
• Part Type: Engine Part
• Manufacturer Warranty: 1 Year Limited
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes

• ✓ Weight: Approximately: .29 pounds
• ✓ Provides a quick & reliable crimp-type connection & wire repairs
• ✓ Simply crimp both ends for a long-lasting, secure connection
• ✓ This product cannot be shipped to: CA

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Package includes 3 flywheel keys

• Engine Part Type: Flywheel Key
• Returnable: 90-Day
• Product Height (in.): 1.5

• ✓ Bolted construction is easy to install
• ✓ Hand truck not included

• Product Height (in.): 1.5
• Manufacturer Warranty: One year warranty from date of purchase against defects in workmanship or material.
• Used With Equipment Type: Utility
• Product Depth (in.): 28.5

0.25

• Product Width (in.): 0.25
• Returnable: 90-Day
• Product Depth (in.): 3
• Engine Part Type: Spring
• Product Height (in.): 0.25
• Used on models 098902,09D902,09J902,09L902,095502,09T502,09T702,10A902,10D902,10T502,10T702: Yes

• ✓ When installing any cold weather kit, it is required that the oil be replaced with 5W-30 synthetic
• ✓ Recommended for use in cold climates

• Part Type: Engine
• Product Depth (in.): 10 in
• Returnable: 90-Day
• Fits Models: 9-22kw Air Cooled Generators