Auto Maintenance Parts Engine Ignition For Sale In Raleigh

• ✓ All external mounting holes re-threaded
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Additional exchange fees may apply
• ✓ New brushes, brush springs and bearings
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ New regulators and diode trios on delco SI type

• ✓ Shipping Dimensions: Approximately 9.75 x 7 x 2.25 inches.
• ✓ For 1988-2000 GM SD210 & SD260 direct drive starters
• ✓ Contains starter drive, drive end bushing, needle bearing set, brush set & thrust washers
• ✓ Comes with all parts needed for quality repairs
• ✓ Weight: Approximately: .8 pounds
• ✓ Quality parts, OEM specifications or better

• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ Premium thermostat
• ✓ 2-3/64 in. x 29/32 in. x 1-3/8 in. x 1-9/64 in.
• ✓ 180 degrees SuperStat
• ✓ With jiggle pin
• ✓ Weight: Approximately: .2 pounds

• ✓ Grooved
• ✓ This product cannot be shipped to: CA
• ✓ Made from high quality material
• ✓ Part Number - 27280
• ✓ Resistant to high temperatures

• ✓ 2-9/32 in. x 47/64 in. x 1-31/32 in. x 1-3/8 in.
• ✓ Quality construction ensures exact fit & a long, trouble-free life
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ Part Number - 14228
• ✓ With 1 seal

• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ Weight: Approximately: 10.5 pounds
• ✓ New insulators & hardware
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ New regulators and diode trios on delco SI type
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion

• ✓ Weight: Approximately: .1 pounds
• ✓ Made from high quality material
• ✓ Part Number - 27174
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.

• ✓ Includes Mechanical Oil/Water Temperature, Electrical Voltmeter & Mechanical Oil Pressure gauges
• ✓ Includes 72 in. high temperature nylon tubing with 1/8 in. & 1/4 in. NPT thread fittings
• ✓ Only for 12 Volt negative ground systems
• ✓ Includes 12 Volt internal backlighting
• ✓ Includes gauge & mounting hardware
• ✓ This product cannot be shipped to: CA

• ✓ Weight: Approximately: .13 pounds
• ✓ Unit with bottom Q.C. terminals includes detachable side mounting brackets
• ✓ Available in 5 pole unit with removable clear protective cover
• ✓ This product cannot be shipped to: CA

• ✓ New insulators & hardware
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Additional exchange fees may apply
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.

• ✓ Packed with the most popular sizes of fuses, terminals, wire nuts, cable ties & wire clips
• ✓ 10-3/4 in. W x 7-1/2 in. H x 3-1/4 in. D
• ✓ Includes multi-tool that strips & cuts wire, crimps ignition & insulated terminals & cuts & rethreads mild steel bolts
• ✓ Weight: Approximately: 4.5 pounds
• ✓ Shipping Dimensions: Approximately 11 x 7.7 x 3 inches.
• ✓ Offers a convenient solution for almost any vehicle's electrical applications & is packed with items necessary to complete most emergency electrical repairs

• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Weight: Approximately: .09 pounds
• ✓ 5.5mm2
• ✓ This product cannot be shipped to: CA

• ✓ Simply crimp both ends for a long-lasting, secure connection
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4.5 x 3 x 1.5 inches.
• ✓ Red

• ✓ Resistant to high temperatures
• ✓ Made from high quality material
• ✓ Part Number - 27281
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ This product cannot be shipped to: CA

• ✓ Premium thermostat
• ✓ Part Number - 45209
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ With jiggle pin
• ✓ 1-13/16 in. x 3/4 in. x 61/64 in.

• ✓ Includes 2 removable keys
• ✓ Shipping Dimensions: Approximately 4.8 x 2.8 x 2.25 inches.
• ✓ Button terminals
• ✓ Weight: Approximately: .34 pounds

• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ Weight: Approximately: .15 pounds
• ✓ Part Number - 45028
• ✓ Premium thermostat
• ✓ This product cannot be shipped to: CA

• ✓ Part Number - 27271
• ✓ Made from high quality material
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Weight: Approximately: .2 pounds

• ✓ Weight: Approximately: .4 pounds
• ✓ 20 amp circuit breaker
• ✓ This product cannot be shipped to: CA
• ✓ Stud type low voltage 6-12 volts circuit breakers SAE Type I

• ✓ Large rewind starter reduces pulling effort for easy starting
• ✓ Dura-bore cast iron cylinder sleeve for extended life
• ✓ Overhead valve design (OHV) for cooler operation
• ✓ Mechanical torque control for additional power
• ✓ Commercial-grade air cleaner with dual seals for longer engine life

• Product Height (in.): 15

• Part Type: Blower Accessory
• For use with EGO POWER+ snowblower SNT2100: Yes
• Used With Equipment Type: Snow Blower
• Product Height (in.): 3.150 in
• Returnable: 90-Day
• Fits Models: SNT2100, SNT2102, SNT2103

• ✓ Red incandescent indicator lamp LED
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4.75 x 2.75 x 1 inches.
• ✓ Chrome construction with red LED

0.25

• There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton: Yes
• Part Type: Engine Part
• Product Width (in.): 0.25
• Returnable: 90-Day
• Product Height (in.): 1.25
• Product Depth (in.): 0.25

• ✓ Durable cast iron cylinder withstands wear and abuse
• ✓ Reduced mechanical noise due to light weight, noise-reducing materials
• ✓ Upgraded engineering and construction for improved service life

• Manufacturer Warranty: 3 Year Limited Parts Warranty
• Fits Models: Varieties of Models
• Returnable: 90-Day

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specification and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Part Type: Engine Part
• Product Height (in.): 8
• Returnable: 90-Day

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Engine Part Type: Cap
• Manufacturer Warranty: 1 year limited
• Part Type: Engine Part

• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ 180 degrees bottom by-pass
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ This product cannot be shipped to: CA
• ✓ 2-3/16 in. x 47/64 in. x 1-11/16 in. x 1-3/16 in.