Auto Maintenance Parts Engine Ignition For Sale In Portland

• ✓ Stud type low voltage 6-12 volts circuit breakers SAE Type I
• ✓ Stud type low voltage circuit breakers with mounting bracket
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4 x 2 x 1.63 inches.

• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ Weight: Approximately: .15 pounds
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Part Number - 45028

• ✓ Weight: Approximately: .1 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Resistant to high temperatures

• ✓ Resistant to high temperatures
• ✓ 1.88 in. outside diameter
• ✓ This product cannot be shipped to: CA
• ✓ Grooved
• ✓ Part Number - 27272

• ✓ Shipping Dimensions: Approximately 8 x 7 x 3.6 inches.
• ✓ Standard 1-1/2 in. black dials
• ✓ Includes 12 Volt internal backlighting
• ✓ Includes gauge & mounting hardware
• ✓ Only for 12 Volt negative ground systems
• ✓ Includes Mechanical Oil/Water Temperature, Electrical Voltmeter & Mechanical Oil Pressure gauges

• ✓ All solenoides remanufactured to meet or exceed OEM standards
• ✓ High temperature silicone grease used on all bushings, bearings, and planetary gear assemblies
• ✓ All starter drives remanufactured to meet or exceed OEM standards
• ✓ Armature commutators machined and checked for run-out
• ✓ Brush leads welded, not soldered
• ✓ New brushes & brush springs

• ✓ Made from high quality material
• ✓ Shipping Dimensions: Approximately 11.3 x 1.92 x 1.92 inches.
• ✓ Grooved
• ✓ This product cannot be shipped to: CA
• ✓ 2 in. outside diameter

• ✓ New insulators & hardware
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Rotor slip rings checked for concentricity or replaced with New

• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .3 pounds
• ✓ 195 degrees reverse poppet
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.

• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ All external mounting holes re-threaded
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Additional exchange fees may apply
• ✓ New insulators & hardware
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new

• ✓ Provides a precise response to your vehicle's cooling system needs
• ✓ 190 degrees
• ✓ This product cannot be shipped to: CA
• ✓ Stainless steel
• ✓ Weight: Approximately: .2 pounds

• ✓ Weight: Approximately: .2 pounds
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Grooved
• ✓ Made from high quality material
• ✓ This product cannot be shipped to: CA

• ✓ Blue
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ 2.0mm2
• ✓ Makes connecting & disconnecting wires quick & easy

• ✓ Part Number - 27271
• ✓ Made from high quality material
• ✓ Resistant to high temperatures
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.

• ✓ 3 Amp
• ✓ Shipping Dimensions: Approximately 4.75 x 2.75 x 1 inches.
• ✓ Snap-in design for easy fit
• ✓ This product cannot be shipped to: CA

• ✓ Contains snap ring & snap ring retainer
• ✓ Help Hotline toll-free number printed on kit
• ✓ Quality parts, OEM specifications or better
• ✓ Comes with all parts needed for quality repairs
• ✓ Made in the USA
• ✓ Contains starter drive, drive end bushing, needle bearing set, brush set & thrust washers

• ✓ Fits most 110000, 111000, 11A000 and 120000 model Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Replaces 693377, 495224, 494213, 499618
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Manufacturer Warranty: One year limited warranty
• Returnable: 90-Day

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

3

• Engine Part Type: Cap
• Product Height (in.): 3
• Product Width (in.): 3
• Returnable: 90-Day

• ✓ Hand truck frame and hardware not included
• ✓ Aircraft grade aluminum extrusion alloy is strong and lightweight
• ✓ Vertical loop handle offers secure gripping area in both upright positions and when hand truck is tilted back
• ✓ Bolt-on construction is easy to install

• Product Depth (in.): 12
• Fits Models: All Magliner brand hand trucks

• Manufacturer Warranty: 1 year limited
• Product Width (in.): 8.625
• Used With Equipment Type: Walk-Behind Mower
• Keep your mower up and cutting all season long: Yes
• Product Depth (in.): 8.25
• Fits Brands: Snapper

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Product Width (in.): 3.188
• Returnable: 90-Day
• Engine Part Type: Starter Drive
• Product Depth (in.): 2.75

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Part Type: Engine Part
• Product Depth (in.): 4
• Product Width (in.): 5.281
• Product Height (in.): 1.5

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Valve and cap replace 5406H, 394805, 392749, 392744, 494325, 390838 and 693054
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Always drain oil into an appropriate container and insure valve is closed prior to adding oil

• Product Width (in.): 11.25
• Part Type: Engine Part

• Product Height (in.): 4.25
• Product Width (in.): 5.25
• Returnable: 90-Day
• Part Type: Engine Part
• Product Depth (in.): 0.844
• Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations: Yes

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Part Type: Engine Part
• Product Width (in.): 5.25
• Manufacturer Warranty: One year limited warranty
• Engine Part Type: Spark Plug

• Returnable: 30-Day
• Orientation: Horizontal
• Product Weight (lb.): 33lb
• Part Type: Engine
• Engine Displacement (cc): 169
• Engine Type: 4 Cycle

1.5

• Returnable: 90-Day
• Manufacturer Warranty: One year limited warranty
• Product Width (in.): 1.5
• Product Depth (in.): 1.5
• Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations: Yes
• Product Height (in.): 1