Auto Maintenance Parts Engine Ignition For Sale In Houston

• ✓ Weight: Approximately: 10.5 pounds
• ✓ This product cannot be shipped to: CA
• ✓ New insulators & hardware
• ✓ New brushes, brush springs and bearings
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new

• ✓ 5.5mm2
• ✓ Weight: Approximately: .09 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Provides a quick & reliable crimp-type connection & wire repairs

• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .13 pounds
• ✓ Available in 5 pole unit with removable clear protective cover
• ✓ Available in side or bottom positioned 1/4 in. Q.C. terminal configurations

• ✓ Quality parts, OEM specifications or better
• ✓ Comes with all parts needed for quality repairs
• ✓ Help Hotline toll-free number printed on kit
• ✓ For 1993-2004 GM 100-140 amp CS 130D series alternators
• ✓ Weight: Approximately: .6 pounds
• ✓ This product cannot be shipped to: CA

• ✓ 1-47/64 in. x 29/32 in. x 13/16 in.
• ✓ 180 degrees SuperStat
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ This product cannot be shipped to: CA
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature

• ✓ Shipping Dimensions: Approximately 10.14 x 4.3 x 4.3 inches.
• ✓ Insoluble in common solvents, alkalis, dilute mineral acids, most organic acids, & most petrochemicals
• ✓ Operates at 100 percent capacity up to 65 degrees C (149 degrees F) & at 50 percent capacity from 65 degrees C to 185 degrees C (149-365 degrees F)
• ✓ 6 in. & 8 in. cable ties - 45 lbs. tensile strength
• ✓ Weight: Approximately: .9 pounds
• ✓ This product cannot be shipped to: CA

• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ New insulators & hardware
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Additional exchange fees may apply
• ✓ Rotors electronically tested for amperage & insulation quality

• ✓ Armatures cleaned inspected and polished
• ✓ This product cannot be shipped to: CA
• ✓ Armature commutators machined and checked for run-out
• ✓ New bushings & bearings
• ✓ New terminal hardware
• ✓ Brush leads welded, not soldered

• ✓ Provides a precise response to your vehicle's cooling system needs
• ✓ Powered by a precisely formulated thermal-responsive wax pellet in a heat conducting copper cup equipped with a stainless steel piston
• ✓ Shipping Dimensions: Approximately 2.63 x 2.63 x 2.63 inches.
• ✓ Stainless steel
• ✓ 190 degrees

• ✓ Provides a quick & reliable crimp-type connection & wire repairs
• ✓ Red
• ✓ Weight: Approximately: .29 pounds
• ✓ Simply crimp both ends for a long-lasting, secure connection

• ✓ Part Number - 27272
• ✓ Resistant to high temperatures
• ✓ Made from high quality material
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ 1.88 in. outside diameter

• ✓ This product cannot be shipped to: CA
• ✓ On-Off SPST
• ✓ Weight: Approximately: .04 pounds
• ✓ Rocker switches are an economical & space-saving alternative to multiple switches

• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Additional exchange fees may apply
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ All external mounting holes re-threaded
• ✓ New regulators and diode trios on delco SI type

• ✓ Shipping Dimensions: Approximately 8 x 7 x 3.6 inches.
• ✓ Includes 12 Volt internal backlighting
• ✓ This product cannot be shipped to: CA
• ✓ Features black bezel with removable black mounting panel
• ✓ Includes 72 in. high temperature nylon tubing with 1/8 in. & 1/4 in. NPT thread fittings
• ✓ Only for 12 Volt negative ground systems

• ✓ Part Number - 27271
• ✓ Resistant to high temperatures
• ✓ This product cannot be shipped to: CA
• ✓ Made from high quality material

• ✓ Snap-in design for easy fit
• ✓ Red incandescent indicator lamp LED
• ✓ This product cannot be shipped to: CA
• ✓ Chrome construction with red LED

• ✓ Weight: Approximately: .4 pounds
• ✓ Shipping Dimensions: Approximately 4 x 2 x 1.63 inches.
• ✓ Stud type low voltage circuit breakers with mounting bracket
• ✓ Used primarily as a wiring harness protector in 12 volt DC automotive systems

• ✓ New brushes, brush springs and bearings
• ✓ Weight: Approximately: 12.7 pounds
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ All external mounting holes re-threaded
• ✓ Startors tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ Additional exchange fees may apply

• ✓ Weight: Approximately: .3 pounds
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ Part Number - 14369
• ✓ 195 degrees reverse poppet
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.

• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ Weight: Approximately: .2 pounds
• ✓ Part Number - 14078
• ✓ Quality construction ensures exact fit & a long, trouble-free life
• ✓ 2-3/16 in. x 47/64 in. x 1-11/16 in. x 1-3/16 in.

• ✓ Compatible with magliner 2-wheel hand trucks
• ✓ 1 tool pocket is 12 in. wide x 3-1/2 in. deep
• ✓ Main pocket is 11 in. D x 9 in. W
• ✓ Heavy-duty straps tighten bag securely to frame and keeps the bag out of the way

• Fits Brands: Magliner
• Product Depth (in.): 13.5

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy

• Manufacturer Warranty: 1 Year Limited
• Product Height (in.): 10.75
• Product Width (in.): 8.25
• Returnable: 90-Day

• Product Depth (in.): 6.40 in
• Product Height (in.): 8.20 in
• Fits Models: Fits Craftsman 36", 38" and 42" ventilated decks
• Returnable: 90-Day
• Star blade mount: Yes
• Part Type: Spindle

1

• Fits Brands: Kohler
• Not for use on units purchased in CA: Yes
• Returnable: 90-Day
• Product Depth (in.): 1
• Manufacturer Warranty: None
• Product Height (in.): 1

• ✓ Used on a variety of horizontal and vertical engine carburetors. Check the engine model parts manual for the correct part #.
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Returnable: 90-Day
• Product Height (in.): 0.5
• Product Width (in.): 1
• Engine Part Type: Hose Connector

• ✓ Used with Generac and Nagano pressure washers
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Part Type: Engine Part
• Product Height (in.): 4.25
• Returnable: 90-Day

• Fits Brands: Briggs and Stratton
• Hub Required: No hub connection available
• Murray mower jackshaft housing: Yes
• Used With Equipment Type: Walk-Behind Mower
• Part Type: Engine Part
• Fits Models: Multiple