Agiseek home

Auto Maintenance Parts Auto Parts Hardware For Sale In St Paul

Become a Partner
Axle Shaft Seal
Prices start at : 24.69 USD

The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase the stress on oil and grease seals. SKF seals deliver unparalleled performance over a wide range of operating conditions for most...
  •  This product cannot be shipped to: CA
  •  High-grade carbon steel, coated with phosphate to ensure rust protection
  •  Shipping Dimensions: Approximately 5 x 5 x 1 inches.
  •  Reliable & dynamic sealing while ensuring a long service life
  •  Designed for tough exclusion of dirt & contaminants
St. Paul
Tie Rod End
Prices start at : 43.99 USD

Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life. The easy installation design makes this perfect for mechanics at work or at home.
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 14 x 2 x 2 inches.
  •  Greaseable sockets reduce corrosion & wear by allowing new lubricant to flush contaminants
  •  The cover plate design allows for tighter tolerances for a more durable part
  •  Powdered metal gusher bearing design enables grease to flow through for reduced friction & enhanced strength
St. Paul
Ball Joint
Prices start at : 78.39 USD

Moog ball joints incorporate proven design and engineering features for like new steering and longer life. The easy installation design makes this perfect for mechanics at work or at home.
  •  Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  •  Weight: Approximately: 2.26 pounds
  •  Shipping Dimensions: Approximately 5 x 4 x 3 inches.
  •  Premium forged housing with increased cross section material in key areas
  •  This product cannot be shipped to: CA
St. Paul
Total Solution Semi-Metallic Brake Pads
Prices start at : 54.99 USD

  •  Monitor wear to reduce damage to rotors
  •  Vehicle-specified engineered formulations providing clean, quiet braking and long service life
  •  Weight: Approximately: 5 pounds
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 8 x 7 x 3 inches.
St. Paul
Strut-Mate Strut Mount Stud Plate
Prices start at : 40.19 USD

Monroe Strut-Mate Mounting Kits are designed to reduce noise and vibration and should be utilized when replacing conventional struts or springs. In addition, Monroe's full line will provide you with late model original equipment coverage, as well as complementing...
  •  Weight: Approximately: 1 pounds
  •  Premium bearing is manufactured to meet OE performance
  •  Upper & lower spring isolators prevent metal-to-metal contact & helps eliminate noise between the spring & spring seat
  •  SAE-grade nuts & bolts meet OE design
  •  Upper spring seat provides consistent performance without transmitting noise or vibration into the chassis
St. Paul
Exhaust Flange
Prices start at : 7.99 USD

Made from high-grade materials, this AP Exhaust Technologies product is known for its outstanding reliability. AP Exhaust flanges are built to meet the needs and requirements of the most demanding customers.
  •  Weight: Approximately: .54 pounds
  •  Provides years of reliable service
  •  This product cannot be shipped to: CA
  •  Made from first-rate materials
St. Paul
Tie Rod End
Prices start at : 35.19 USD

Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life. The easy installation design makes this perfect for mechanics at work or at home.
  •  This product cannot be shipped to: CA
  •  Greaseable sockets reduce corrosion & wear by allowing new lubricant to flush contaminants
  •  Weight: Approximately: 2.19 pounds
  •  Sunoloy-coated metal bearings provide the smooth stud swing that technicians & drivers love
  •  Exclusive cover plate protects against contaminants leaking into the bearing surface
St. Paul
Ball Joint
Prices start at : 52.19 USD

Moog ball joints incorporate proven design and engineering features for like new steering and longer life. The easy installation design makes this perfect for mechanics at work or at home.
  •  Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction & enhanced strength
  •  Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  •  Weight: Approximately: 1.44 pounds
  •  Greaseable socket reduces corrosion & wear by allowing new lubricant to flush contaminants
  •  This product cannot be shipped to: CA
St. Paul
Wheel Bearing & Hub Assembly
Prices start at : 268.29 USD

From the composition of the steel to the quality of the bearing and seals, every aspect of a hub unit is critical to long service life. Precision tolerances and improved surface finishing reduce noise and vibration, and high quality reproduction sensors...
  •  Proper implementation of heat treatment
  •  Engineered to meet or exceed OE specifications
  •  Premium seals, both inboard & outboard, protect the bearing from contamination
  •  High-quality steel & surface finishes prolong the lifespan and prevent bearing noise
  •  Shipping Dimensions: Approximately 9 x 9 x 8 inches.
St. Paul
Steering Damper
Prices start at : 33.95 USD

The Monroe Magnum steering stabilizer stops vibration before it gets to the driver. Acting as a horizontal shock absorber, Monroe Magnum steering stabilizers help reduce vibrations that travel through the steering system to the driver.
  •  Increase control under all driving conditions by reducing steering shimmy & driver fatigue
  •  Special, self-lubricating fluid seal designed to retain gas without excessive wear or friction
  •  Sintered iron piston is stronger than traditional metals to enhance durability for long service life
  •  Ideally suited for trucks, vans, & 4-wheel drive vehicles
  •  Shipping Dimensions: Approximately 30 x 8 x 7 inches.
  •  Full displaced valving has better range on both the compression & extension cycles of the unit for a smooth, comfortable ride
St. Paul
Total Solution Semi-Metallic Brake Pads
Prices start at : 49.99 USD

  •  Weight: Approximately: 1.89 pounds
  •  Vehicle-specified engineered formulations providing clean, quiet braking and long service life
  •  Rubberized shim technology substantially reduces noise
  •  This product cannot be shipped to: CA
  •  Moly-based synthetic oil lubricant
St. Paul
8 In. Wire Wound OEM Replacement Antenna Mast
Prices start at : 14.99 USD

  •  1-year limited manufacturer's warranty
  •  Easy installation
  •  Weight: Approximately: .3 pounds
  •  Model # AW-NRMWW
  •  Fits most factory antenna bases
  •  Designed for AM/FM radio bands, and vehicles with removable masts
St. Paul
Cotter Pin Assortment
Prices start at : 2.99 USD

  •  Weight: Approximately: .0616 pounds
  •  Shipping Dimensions: Approximately 5.512 x 1.772 x .551 inches.
  •  Sizes - 1/16 x 1/2, 1/16 x 1, 3/32 x 1, 1/8 x 1-1/2 & 1/8 x 2 in.
St. Paul
Ball Joint
Prices start at : 44.09 USD

Moog ball joints incorporate proven design and engineering features for like new steering and longer life. The easy installation design makes this perfect for mechanics at work or at home.
  •  Greaseable socket reduces corrosion & wear by allowing new lubricant to flush contaminants
  •  Dust boot with encapsulated Belleville washer helps control axial & radial movement
  •  Larger grease reservoir & easy-to-install pre-tapped grease fitting hole for improved maintenance
  •  Shipping Dimensions: Approximately 5 x 3 x 3 inches.
  •  Weight: Approximately: 1 pounds
St. Paul
Wheel Bearing & Hub Assembly
Prices start at : 313.49 USD

From the composition of the steel to the quality of the bearing and seals, every aspect of a hub unit is critical to long service life. Precision tolerances and improved surface finishing reduce noise and vibration, and high quality reproduction sensors...
  •  This product cannot be shipped to: CA
  •  Engineered to meet or exceed OE specifications
  •  Proper implementation of heat treatment
  •  Weight: Approximately: 8.04 pounds
  •  Premium seals, both inboard & outboard, protect the bearing from contamination
St. Paul
Strut-Mate Strut Mounting Kit
Prices start at : 53.89 USD

Monroe Strut-Mate Mounting Kits are designed to reduce noise and vibration and should be utilized when replacing conventional struts or springs. In addition, Monroe's full line will provide you with late model original equipment coverage, as well as complementing...
  •  This product cannot be shipped to: CA
  •  Premium bearing is manufactured to meet OE performance
  •  Superior rubber-to-steel bonding & plated steel for longer wear & to meet or exceed OE performance
  •  Shipping Dimensions: Approximately 9 x 7 x 4 inches.
  •  Upper spring seat provides consistent performance without transmitting noise or vibration into the chassis
St. Paul
Brake Hose
Prices start at : 40.99 USD

Wagner Brake Hose hydraulics deliver improved OE-design products to the aftermarket, giving you the capability to repair and improve a brake system with the finest products possible.
  •  Provides longer brake life & performance
  •  Weight: Approximately: .94 pounds
  •  Shipping Dimensions: Approximately 8 x 8 x 2 inches.
  •  This product cannot be shipped to: CA
St. Paul
Tie Rod End
Prices start at : 50.09 USD

Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life. The easy installation design makes this perfect for mechanics at work or at home.
  •  Sunoloy-coated metal bearings provide the smooth stud swing that technicians & drivers love
  •  Shipping Dimensions: Approximately 8 x 3 x 2 inches.
  •  Weight: Approximately: .77 pounds
  •  The cover plate design allows for tighter tolerances for a more durable part
  •  Powdered metal gusher bearing design enables grease to flow through for reduced friction & enhanced strength
St. Paul
Strut-Mate Strut Mounting Kit
Prices start at : 43.99 USD

Monroe Strut-Mate Mounting Kits are designed to reduce noise and vibration and should be utilized when replacing conventional struts or springs. In addition, Monroe's full line will provide you with late model original equipment coverage, as well as complementing...
  •  Superior rubber-to-steel bonding & plated steel for longer wear & to meet or exceed OE performance
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 7 x 6 x 3 inches.
  •  SAE-grade nuts & bolts meet OE design
  •  Upper spring seat provides consistent performance without transmitting noise or vibration into the chassis
St. Paul
Control Arm Bushing
Prices start at : 44.99 USD

Moog bushings incorporate proven design and engineering features for like new steering and longer life. The easy installation design makes this perfect for mechanics at work or at home.
  •  This product cannot be shipped to: CA
  •  Elastomer compounds do not utilize any reground rubber fillers
  •  Bushing manufactured from high quality elastomer compounds for durability & ride performance
  •  Provides like-new steering, ease of installation & longer life
  •  Shipping Dimensions: Approximately 5 x 3 x 3 inches.
St. Paul
Trailing Arm Bushing
Prices start at : 29.39 USD

Moog bushings incorporate proven design and engineering features for like new steering and longer life. The easy installation design makes this perfect for mechanics at work or at home.
  •  Easy to install
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 5 x 4 x 3 inches.
  •  Restores like-new steering & handling
St. Paul
Strut-Mate Strut Mounting Kit
Prices start at : 63.19 USD

Monroe Strut-Mate Mounting Kits are designed to reduce noise and vibration and should be utilized when replacing conventional struts or springs. In addition, Monroe's full line will provide you with late model original equipment coverage, as well as complementing...
  •  Upper & lower spring isolators prevent metal-to-metal contact & helps eliminate noise between the spring & spring seat
  •  SAE-grade nuts & bolts meet OE design
  •  This product cannot be shipped to: CA
  •  Upper spring seat provides consistent performance without transmitting noise or vibration into the chassis
  •  Shipping Dimensions: Approximately 7 x 7 x 4 inches.
St. Paul
Control Arm & Ball Joint Assembly
Prices start at : 57.99 USD

  •  Bushing material - rubber
  •  Attach method - bolt on
  •  Length - 8.340 in.
  •  Fasteners included - no
  •  This product cannot be shipped to: CA
  •  Mount type - bolt on
St. Paul
Exhaust Pipe Adapter
Prices start at : 39.99 USD

Made from high-grade materials, this AP Exhaust Technologies product is known for its outstanding reliability. AP Exhaust pipe adapters are built to meet the needs and requirements of the most demanding customers.
  •  Shipping Dimensions: Approximately 1 x 1 x 1 inches.
  •  3 in. outer diameter
  •  Weight: Approximately: 4.5 pounds
  •  36 in. length
  •  Provides years of reliable service
St. Paul
Parking Brake Hardware Kit
Prices start at : 4.99 USD

Wagner Parking Brake Kits are the key to doing a quality job right the first time. Installing new premium hardware will complement a disc pad and/or brake shoe replacement, and ensure optimal braking performance.
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 7 x 4 x 2 inches.
  •  Produces smoother pedal travel
  •  Provides longer brake life & performance
St. Paul
Tie Rod End
Prices start at : 72.09 USD

Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life. The easy installation design makes this perfect for mechanics at work or at home.
  •  The cover plate design allows for tighter tolerances for a more durable part
  •  This product cannot be shipped to: CA
  •  Exclusive cover plate protects against contaminants leaking into the bearing surface
  •  Weight: Approximately: 1.54 pounds
  •  Powdered metal gusher bearing design enables grease to flow through for reduced friction & enhanced strength
St. Paul
Total Solution Semi-Metallic Brake Pads
Prices start at : 59.99 USD

  •  Ensure less pad separation, vibration and noise
  •  Vehicle-specified engineered formulations providing clean, quiet braking and long service life
  •  Rubberized shim technology substantially reduces noise
  •  Monitor wear to reduce damage to rotors
  •  Shipping Dimensions: Approximately 8 x 7 x 3 inches.
St. Paul