Auger Purchase

Looking for a small portable grain auger to unload grain from truck to bin. Looking for small grain auger 20-30 ft long to unload oats from truck to bin 4/6/8 inch diameter does not need wheels

Sakundiak grain auger, 8 inch tube, 52 foot length, with self propeled mover and 24 hp engine (or larger) Sakundiak grain auger, 8 inch tube, 52 foot length, with self propeled mover and 24 hp engine (or larger), will pick up within 300 km of Swift Current...

6\" and does not need to be new. Best if you are near raleigh north carolina. 30' electric or pto grain auger. Must be on wheels with a winch to raise and lower. If electric please tell me the voltage.

8 inch X 30 some ft long. Looking for an auger to load trucks out of bin. Hand lift is OK.. Elc Motor or Elc Motor mounts. Single Phase 220. Needs to be in good shape and ready to go..

Wanted: three - 2'(two foot) extentions for unloading augers for massey ferguson combines. Wanted: three - 2' extentions for unloading augers for massey ferguson combines. Two are for #860 combines and one is for #760 combine.

Prefer hydraulic driven auger, but will consider pto driven auger. Wanted -- 3 point hitch post hole auger for 50 hp farm tractor in good condition. Must be in good working condition.

Model type does not matter, but it needs to have about zero clearance in the boot and be able to move all the feed. We are looking for a used feed bin auger or boot from a swine or poultry bin, similar to Choretime, Pax, Roxell, etc

Little Beaver Auger. Looking for a Little Beaver post hole digger. At least 6hp motor. Need auger bits of 6 inch and 8-10 inch. Good condition. Good condition with multiple (at least 2 auger bits).

Excellent condition a must. Would like it to have hydrulic auger and rear hitch. Very low acres used.

Motorized crusher/de-stemmer. Needs to be equipped with an auger to feed grapes into an internal drum and rollers for stem removal. Must be of stainless stee. Must be 110v, hp of 1-2.

Looking to buy a L3400 (gear) 2005 and newer, willing to trade or partial trade cruiser motorcycle 1600 cc chromed out. Looking for Kubota series 3400 for our farm, any implements would be great mower, auger, blade, etc.

Pto/cab/ac/2wd need for use as fine mower, disc, box blade, bush hog, fertalizer spreader, fence auger.

Searching for portable grain cleaning unit. Prefer pricing under $20,000 Please contact with details. Would prefer indent cleaners with augers.

I want to buy Scalder, Picker, Mobile Eviscerating Line ) 16+ feet, Tables, etc. Also, could use linear (auger type) poultry feeding equipment to go with my existing grain bins. Needing to equip small USDA processing operation.

Looking to buy tractor. Also interested in Implements, if avail: Tiller, Auger, Back Blade, Log Grapler/forks, rake) Will be dragging logs with grades of approx. Need Tractor 40+ HP, with Loader, 4x4, PTO 3Pt., pref Diesel.

Want to buy: Gleaner R72 between years 1999 and 2002 preferable with no more that 1000 separater hours We have a 1997 Gleaner R72 to trade or sell. We want lateral tilt, a 14 inch auger, and rear wheel assist on the combine.

I am in need of an approximate 40 Horse Power, used (with low hours, under 1,000 preferred) BobCat for home use/light landscaping. The seller will need to arrange for delivery of BobCat in Moraga, California.

Poultry pan feeders, tubes augers, motors, monitors, and bottom hoppers (3) enough for 1500 lineal feet, 30,000 sq ft. Still under power, but not in operation. Poultry feeders, tubes augers, motors, monitors, and bottom hoppers (3) enough for 1500 lineal...

Wanted: Gleaner R72 combine between the years of 1999 and 2002 with no more than 1000 hours I have an R72 to trade if that is an option. Wanted: Gleaner R72 combine between years of 1999 and 2002 with 500 to 1000 hours, lateral tilt, 14 inch auger, rear...

Yr.1998 to 2004 Combine must have chopper and rock trap.Prefer afx rotor, long unload auger, hopper topper but not required, Most any year from 98 to 04 do not need pickup head but would be nterested in a 30 ft.

I need a Post Hole Digger for a John Deere 4100. Looking for a 3-point Post Hole Digger for a John Deere 4100. Rear mount 3-point hitch is needed. I would prefer a 12\" auger but I can always go purchase one later.

I am looking to buy twenty tons of seed oats, bulk or bag. The pickup point needs to be within 800 miles of Dallas, TX. I have a 53 foot van trailer with front and rear inspection ports, so for bulk you would need a grain auger or flexible downspout.

Need the drive tube also. Need 3 point cat 1 snowblower 2 stages w/ auger for 45 hp tractor power take off. 72 inch width minimum. Should be 2 stage blower. Located in idaho panhandle and can pick up within 200 miles.

Poultry feeding and watering systems.This would therefore include conveyors/augers, hoppers, drive units, pans, nipples and so on. The preferred system is the Big Dutchman,although any comparable system will be considered.It should be in good working...

Looking for bulk feed truck. 12T would be perfect. We will pay cash for the right one. Please call or email us. Hoppers must handle 18 ton or preferably less. We can use up to 18T, 6 compartments.

I am looking for part now 1347351C1 (upper gear housing assembly on the unloading auger) for my Case IH 2144 Combine. This is for my Case IH 2144 axial- flow combine. Is this housing available separate without intnernal parts?

Hi, I recently had a fire and lost my storage building which housed, among other things, a collection of antique farm implements my Dad had gathered for me my entire life. Does anyone out there have any thoughts on the following : antique hand crank bean...