Protect your hands when you belay/rappel and still have the dexterity needed to tie knots and work with hardware! Low-profile neoprene cuff with a reinforced carabiner hole to attach to your climbing harness.
Product Features
Durable double layer of leather in high-wear areas: fingertips, palm, between thumb and index finger: Product Features
Back made of breathable stretch nylon for excellent fit and ventilation: Product Features
Neoprene cuff with Velcro closure: Product Features
Made of high quality leather for the perfect balance of durability and dexterity: Product Features
Carabiner hole to attach gloves to harness: Product Features
It can be used in more applications because it is secured on the outside of the limb or trunk. The cap is made from UV protected vinyl. It also requires less than half the parts (13) required in a traditional system installation (31).
Optional leg strap covers can be added for even more comfort. NOT FOR FALL ARREST Our most popular saddle! Four fixed dee saddle: This saddle offers a seat strap with fixed D-rings for more stability.
Specs
Saddle back features five rounded nylon loops that hold up to 15 lbs. of accessories and two nylon utility straps with a chrome brass 200 snap and a 2" nickel plated ring that keep tools close at hand: Specs
This shape also distributes the load along the major axis of the part. Kong designed their extra-large carabiners with a wide gate opening and a high tensile strength. They develop and produce each part in their home country of Italy.
Specs
Product Features
Open gate load (kN): 20: Specs
Reinforced auto block sleeve meets ANSI lateral stress guidelines: Product Features
SLH12 is rope and snaps only; no prusik. The 12CV is combined with Tenex eye-to-eye tail for prusik or other friction hitch use. Add your favorite carabiner to the eye to complete the safety lanyard! A 2-in-1 safety lanyard utilizing 12ft Hy Vee 16-strand...
Type: 3 Strand 10 ft Rope Lanyard with Safety Snaps
Overall length of 26". 1" wide with roller buckles secured on top grain latigo steer hide wear pads that's riveted for extra strength. Ten holes for perfect adjustment and nickel plated hardware! Upper straps are necessary to secure spur sets to the climber's...
Pictured with Galvanized Thimble sold separately. For tree cabling and bracing! Tree grip dead-ends wrap quickly around cable, ends time consuming splicing and clamping, maintains original breaking strength.
Seat and leg straps are lined with soft brown oil tanned top grain steer hide leather. Sizing note: Allow adjustment for seasonal clothing. Sliding ring saddle with seat and leg straps.
For enhanced torso movement. Interlocking leg buckles and tongue buckle waist. Classic traverse saddle comes with two sliding suspension Dee rings and a batten seat design.
Rope weight per 100ft is 7.6lbs for 1/2 inch; 13.3 lbs for 5/8 inch; 16.8 lbs for 3/4 inch. The cover is double braided polyester and includes a Maxijacket coating for excellent abrasion resistance.
The cotton webbing is reinforced with nylon providing comfort and strength. Thick Cotton Saddle with Four D-rings for more stability. This saddle is similar to our Climber's Best Saddle in a cotton version.
Specs
1-inch neoprene leg straps: Specs
Size: Small
Two nylon utility straps; one with a 2-inch nickel-plated ring, the other with a 2-inch nickel plated snap: Specs
Nickel plated rivets. Top grain leather. Pads have a double layer of leather and are lock stitched and riveted for durability! A climber tunnel is built in to maximize stability. 1/2"thick felt cushions the leg.
Designed for use in false crotch systems to save wear and tear on bull ropes! Upper bushing maximizes sling strength and wide side plates protect the rope from contact with rough bark.
Popular Steel Tree Climber Set with 3 & 1/2" permanent gaff! Contoured shank accommodates the ankle bone and the offset stirrup sits in the center of the foot. High quality 3/4" cushion leather pads with 3 loops and tunnel design to keep climbers stationary.
The long gaff is good for thick-bark trees: Product Features
Consists of our CSR312 climbers, leather pads, and nylon leg & foot straps: Specs
Ten holes for perfect adjustment and nickel plated hardware. Yellow top grain Latigo steer hide leather! Lower straps are necessary to secure spur sets to the climber's leg. Riveted for extra strength.
Works very well with mechanical ascension devices. 11mm (0.5in) diameter. Has smoothest cover for mechanical ascension; low elongation with minimal bounce. Blaze is an innovative, lightweight 11mm spliceable double-braided rope that boasts a smooth 24-strand...
XTC Fire is a tight braid 16-strand polyester over a high twist, torque balanced polyester core. Extremely tight braid and smooth cover works well with cammed devices. Smoothest cover runs well through cammed devices; tightest cover in the industry.
An easily adjustable rope lanyard with stiff handling characteristics of of a wire core flipline, without the steel cable! This 7/16"uniline rope lanyard comes with a BuckGrab adjuster for simple and quick length adjustment.
Overall length 8': Specs
Includes the Buckadjuster one-way cam: Product Features
Single "D" capacity. Drop forged steel, 5,000 lb tensile strength. New ergonomic design makes it easy to open the snap with a gloved hand! In two styles: order with or without a nylon rope thimble to reduce wear.
Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure around a tree trunk creating a secure point for a rigging block etc. Note: Knots and bending used to secure the sling will reduce workload limit.
The automatic sleeve makes this carabiner suitable for professional use! They test each piece to ensure the utmost safety and manufacturing excellence. The keylock system prevents snagging on your rope or bolts.
Specs
Color: Polished: Specs
Material: Aluminum alloy: Specs
Keylock system prevents snagging: Product Features
Made from Samson Tenex rope! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is more evenly distributed for improved performance.
Holds its shape even with heavy use! Pro-Master 3-strand twisted rigging line. For price and performance there isn't a better three-strand rigging rope in the marketplace. Spun fiber on the surface offers excellent grip and knot holding.
Specs
Constructed of spun and filament polyester jacket fibers covering polyolefin core fibers: Specs
