A myraid of uses, from tying off safety anchors to racking equipment "bandolier" style! Made from military-spec webbing. Assorted colors.1" x 24 Safety load rated at 1,200 lb.
1" neoprene leg straps keep the seat strap in place during use. Thick Cotton Saddle with Four D-rings for more stability. The cotton webbing is reinforced with nylon providing comfort and strength.
Specs
1-inch neoprene leg straps: Specs
Four D-rings, cotton webbing reinforced with nylon: Specs
Two nylon utility straps; one with a 2-inch nickel-plated ring, the other with a 2-inch nickel plated snap: Specs
Extremely light with great feel and knot-tying characteristics. 11mm (0.5in) diameter. Works very well with mechanical ascension devices. The 24-strand Tite-Braid cover virtually eliminates cover milking and the polyester core creates a firm rope that...
A complete guide to successful tree felling and wood cutting methods! Loaded with practical information that is essential to the safety and success of any tree-felling and wood cutting operation.
1/2-inch, 5/8-inch, and 3/4-inch in orange 9/16-inch in yellow A firm polyester double braided rope with high strength, low stretch and excellent resistance to wear! Added coating provides additional abrasion resistance.
This improved accuracy allows you to get your weight and line where it needs to go on the first shot. Improves the accuracy of your Big Shot Launcher! SherrillTree designed the Notch Big Shot Trigger for use with their Big Shot Launchers .
Specs
Product Features
Product Benefits
Color: Black/Metallic: Specs
Improves launch accuracy and consistency: Product Benefits
Weight (pounds): 0.70: Specs
Quick, mid-pole attachment: Product Features
Fits all round 1-1/4-inch utility-grade fiberglass poles: Product Features
The braid is tight to prevent snagging, but supple enough for good handling. Single braid construction eliminates the core; nubby 12-strand construction for hand climbers. 100% solution dyed, highly visible, orange polyester rope in a single braid 12-strand...
CMI approves the Rope Jack for use with static ropes from 3/8 to 5/8-inch in diameter. The handle length limits this excessive loading. This small profile makes it easy to transport — even for a climber! CMI designed the Rope Jack for one-handed operation...
For efficient use, a micro pulley can be secured below the hitch, allowing one hand tending! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is...
Ten holes for perfect adjustment and nickel plated hardware! Upper straps are necessary to secure spur sets to the climber's leg. Latigo steer hide leather. 1" wide with roller buckles secured on top grain latigo steer hide wear pads that's riveted for...
1" neoprene leg straps keep the seat strap securely in place. NOT FOR FALL ARREST Optional leg strap covers can be added for even more comfort. Sizing Note: Allow adjustment for seasonal clothing.
Specs
Features dees at front and back for easy attachment of suspenders (sold separately) Product Number SUS122: Specs
The 1" high pull granite coated webbing leg straps help prevent slip-through: Specs
The 6" wide waist back is foam filled and lined with a soft oil tanned top grain steer hide leather: Specs
Seat strap floats on waist belt for easy positioning and comfort and is lined with soft oil tanned top grain steer hide leather: Specs
Bright high visibility colors enable easy identification. If every tree were the same, one weight would do the job. Our weights have a tighter, more aerodynamic design than competition for higher throws with more accuracy and ease of flight through limbs...
Specs
Available in 3 different weights: Specs
Bottom loop weights allow quick attachment of carabiners/throw line: Specs
Aluminum pulley for arborist use! Uses a 1/2 inch rope. The minimum breaking strength is 3,800 lbs. Has aluminum sideplates and aluminum sheave, and the sheave has a bearing in the axle.
Carabiner shown on sliding prusik not included with 11CV or 12CV. The perfect work positioning lanyard! Provides the climber a means to stay continuously secured to the tree when climbing over obstructions.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard.
Product Features
Six foot long: Specs
Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard: Product Features
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections: Product Features
Holds its shape even with heavy use! Pro-Master 3-strand twisted rigging line. For price and performance there isn't a better three-strand rigging rope in the marketplace. Spun fiber on the surface offers excellent grip and knot holding.
Specs
Tensile Strength: 6,300 lbs.
Constructed of spun and filament polyester jacket fibers covering polyolefin core fibers: Specs
This ascender makes a great companion to the Pantin foot ascenders or can be used with the old-fashioned "footlock". Aluminum frame with chrome plated steel cams. Use with rope diameters 8 to 13 mm.
Specs
For ropes between 5/16" to 1/2": Specs
Lower holes for connecting a lanyard: Product Features
Designed with a unique Pull-Down & Twist Sleeve! It's intuitive and once you've tried it, you may never go back to a traditional action sleeve. The high inward sleeve strength aids in security, while the large gate opening provides for quick attachment.
Specs
Overall length 4.2": Specs
Overall width 2.8": Specs
Major axis breaking strength 5845 lb ("major axis" is when the carabiner is pulled in both directions lengthwise): Specs
Designed for use in false crotch systems to save wear and tear on bull ropes! Upper bushing maximizes sling strength and wide side plates protect the rope from contact with rough bark.
Feed your throw line into this bag hand-over-hand. Use for deployment from ground or for repositioning while suspended in trees. When weight is thrown, line will unfurl tangle-free.
Specs
Weaver medium throw line deployment and storage bag, blue: Specs
