New T-shaped design! Traditional 1-inch thick foam liner is layered between an outer layer of yellow steer hide leather and inner layer of soft brown leather.
Sizing note: Allow adjustment for seasonal clothing. Not for fall arrest. This saddle is similar to our Climber's Best Saddle in a cotton version. The cotton webbing is reinforced with nylon providing comfort and strength.
Specs
Size: Small
Four D-rings, cotton webbing reinforced with nylon: Specs
Ship Wt. .5 lb. A height adjustable elastic keeps the foot in the loop, regardless of shoe type.. The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with...
Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
Our weights have a tighter, more aerodynamic design than competition for higher throws with more accuracy and ease of flight through limbs and branches. Bright high visibility colors enable easy identification.
Feed your throw line into this bag hand-over-hand. Large heavy duty nylon bag with drawstring opening. When weight is thrown, line will unfurl tangle-free. Use for deployment from ground or for repositioning while suspended in trees.
Specs
9 in. high x 7 in. wide: Specs
For use and deployment from ground or for repositioning while suspended in tree: Specs
For efficient use, a micro pulley can be secured below the hitch, allowing one hand tending! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is...
This shape also distributes the load along the major axis of the part. This carabiner features a screw sleeve. The burnished finish allows for greater visibility of the laser markings.
Specs
Product Features
Screw sleeve opens easily — even when wearing gloves: Product Features
Length (mm): 114: Specs
Color: Black/Steel/Bronze: Specs
Main axis load (kN): 50: Specs
Body diameter (mm): 12: Specs
Reinforced auto block sleeve meets ANSI lateral stress guidelines: Product Features
Assorted colors.1" x 24 Safety load rated at 1,200 lb. A myraid of uses, from tying off safety anchors to racking equipment "bandolier" style! Made from military-spec webbing.
Rope Dia: 1/2"Weight: 2.4 oz Sheave Dia: 1-1/4"Side Plate: Alum. A myriad of uses, but commonly used for one handed advance of friction hitches along the climbing line! Tensile: 7,000 lb WLL: 700 lb Sheave: Alum.
Convenient knurled knobs allow for easy rigging of the upper bushing. The upper bushing will accommodate slings up th 3/4" in diameter. Designed for use in false crotch systems to save wear and tear on bull ropes! Upper bushing maximizes sling strength...
1" wide with roller buckles secured on top grain latigo steer hide wear pads that's riveted for extra strength. Overall length of 26". Latigo steer hide leather. Ten holes for perfect adjustment and nickel plated hardware! Upper straps are necessary to...
Top grain leather. Nickel plated rivets. 1/2"thick felt cushions the leg. Pads have a double layer of leather and are lock stitched and riveted for durability! A climber tunnel is built in to maximize stability.
The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Carabiner shown on sliding prusik not included with 11CV or 12CV. The perfect work positioning lanyard! Provides the climber a means to stay continuously...
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
Ten holes for perfect adjustment and nickel plated hardware. 1" in width and feature roller buckles secured on top grain latigo steer hide wear pads. Riveted for extra strength! Upper straps are necessary to secure spur sets to the climber's leg.
The convenient drawstring top closure provides quick and easy access. A scissor snap offers easy attachment to belt. Helps keep rope coiled, tangle-free and protected! Made from 1,200-denier polyester, these bags feature spiral wire thats attached to...
Completely fasten the main trigger housing before use. Improves the accuracy of your Big Shot Launcher! SherrillTree designed the Notch Big Shot Trigger for use with their Big Shot Launchers .
Specs
Product Features
Fits all round 1-1/4-inch utility-grade fiberglass poles: Product Features
Weight (pounds): 0.70: Specs
Diameter (inches): 1-1/4: Specs
Color: Black/Metallic: Specs
Improves launch accuracy and consistency: Product Benefits
Use with your Notch Big Shot Launcher: Product Features
Meets OSHA, ANSI and CSA requirements. 6' length, single leg. Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest...
Specs
Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard: Product Features
Arbor-Plex works well when wet and is very durable. It is identified by a green ink stripe. Lightweight, high strength 12-strand climbing line, and the most widely used rigging line in the arborist industry! It resists snags and has excellent knot-holding...
Blue color that won't fade or run, with high visibility in trees. All polyester climbing rope with high strength, low stretch, excellent abrasion resistance and a long service life! The single braid construction eliminates the need for milking and stays...
Specs
Product Features
100% polyester: Product Features
7300 lbs tensile strength, 10 to 1 working load: Specs
True-Blue offers the highest level of performance in a high strength , low stretch climbing line with maximum wear resistance: Specs
Maximum wear life: Product Features
Can also be used for light/medium duty rigging operations: Product Features
Moisture wicking Dri-lex liner. Compatible with Buckingham titanium/steel and Bashlin aluminum climbers. Metal insert for proper climber shank position. Buckingham combines their popular Big Buck and Cinch Velcro pad, to create the ultimate climber pad!...
Specs
Compatible with Buckingham titanium/steel and Bashlin aluminum climbers (Bashlin is not a brand we sell, however, these pads will work with them if you have a pair): Specs
The cover is double braided polyester and includes a Maxijacket coating for excellent abrasion resistance. Average tensile/working load is 10,500 lbs/1,050 lbs for 1/2 inch; 18,000 lbs/1,800 lbs for 5/8 inch; 23,000 lbs/2,300 lbs for 3/4 inch.
This duffel bag is spacious AND durable! Whether you take it out into the field, or just use it for storing those "have to have on hand" products, this arborist tote bag gets an A+! Spacious, durable, and easy to carry, the ATB will be number one in your...
